ReviewsEdge Forming Router Bit

CNC Spoilboard Surfacing Router Bit, 1/4' Shank 1' Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4″.
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/4\ Shank 1-1/2\ Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4".
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

1\ Radius Roundover Router Bit 1/2\ Shank, Edge Forming Roundover Bit Bead Rounding Over Edging Bit by BINSTAK

  • INDUSTRIAL QUALITY ROUND OVER BEADING ROUTER BIT: Excellent for producing smooth, uniformly rounded edges. Great for edging, beading and/or molding applications. And can be used without the bearing as a standard straight bit, Great for combined plunge-cutting and pattern/template routing..
  • USE RANGE for ROUNDOVER ROUTER BIT: Suitable for hard woods, mdf, laminate, particle board, plywood compact panel and etc. Avoid cutting metal and non-wood materials..
  • HIGH QUALITY CNC ROUNDOVER OVER BIT: The sharp YG6X virgin carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. This round over edge bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, it can withstand some heavy duty use and the test of time..
  • Use on CNC and other automatic routers. Such as woodworking engraving machine, trimming machine, CNC hand-held, table-mounted router, etc..
Check Stock

EilxMag 100-Piece Router Bit Set 1/4" Shank with Aluminum Storage Case Tungsten Carbide Router Bits for Woodworking

  • 【High Quality】: The router bits set is made of high quality alloy steel, with strong surface coating treatment on the surface, which is tough and durable..
  • 【Widely Used】: This router bit suitable for many wooden boards, such as hardwood, softwood, solid wood, plywood, particle board, MDF, etc. It can be used for wood trimming, boring and tenoning, punching and carving..
  • 【Multi Types】: Router bit kit contains a variety of different type of router bits to meet your cutting needs.These Router Bits designed with 1/4" round shank,It has tungsten carbide cutting edge, which ensures sharp and precise cutting milling work..
  • 【Easy to Store】: The tungsten carbide router bit come with a sturdy aluminum outer box, it can perfectly store the products, effectively protect the internal products, and is also easy to carry, which is more convenient for your work..
  • 【Service & Guarantee】: If you are not satisfied with wood router bits for any reason, please contact us directly, we will help and provide replacement or refund..
Check Stock

Upcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC (1/4\ Shank Up-Cut)

  • Professional Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY UPCUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The spiral router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters for Mills Machines

  • UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • The router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

Downcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC (1/4\ Shank Down-Cut)

  • Professional Downcut Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY DOWN-CUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch downcut spiral flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The downcut spiral router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

BOSCH PR102 Palm Router Edge Guide

  • Straight edge guide designed for palm routers – mounts to Bosch GKF125CE, PR10E and PR20EVS palm routers’ PR001 and the PR101 fixed bases using the included mounting hardware.
  • Guides palm Router along the edge of a workpiece – for edge-forming operations that use bits without bearings or for creating slots and grooves.
  • Adjustable – allows adjustment up to 3-5 8 in. In from the edge of the workpiece.
  • Durable build – features steel construction.
Check Stock

Router Bits 1/4 Shank, Router Bit Set 15 Pcs, Roundover Router Bit 1/4 Shank - Carbide Router Bits for Wood, Woodworking, DIY

  • ✎[Router Bit Set] - 100% brand new and good quality router bits 1/4 shank boasts alloy blade, balanced craftsmanship and a solid hardened steel board with anti kickback design ensures safe installation. Rigid router bits carbide are all have a hardened solid alloy steel construction with Build-up & heat resistant Teflon coating, Carbide Edge for durability and longevity. These wood router bits set can withstand some heavy duty use and the test of time.
  • ✎[Perfectly Matched Router Bits] - 1/4 shank router bits set precisely match the requirement of the American dimension and standard. Each router bit has a 1/4-inch universal shank which fits all models of routers, carbide router bits 1/4 shank is compatible with all major router instrument (either handheld or benchtop router table) such as MNA, Kowood, Bosch, DeWalt, Makita, Tooldo, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker.
  • ✎[Great Value 15 Piece Router Bits Set] - Precisely machined sharp YG8 tungsten carbide blade makes clean and accurate cuts on all types of wood, Cutters (C3 Micro-grain Tungsten Carbide) to slice smoothly into stock, clean, splinter free, prominent advantages in practical use. Select bits featuring a bearing roller for smooth and aligned operations. Well-construct....
Check Stock

Jointing Bit Set 2 Plus 45 Degree, Tongue and Groove Router Bit with 45°Lock Miter Bit 1/4 Inch Shank Set (Pack of 3). Right Angle and parallet Angle Joints Set by TOOLDO

  • TOOLDO tongue & groove router bit set with 45 degree lock miter router bit is designed for wood.
  • Widely Application--Mutifunctional router bit sets meet your various needs.Those router bits work great with woods, MDF, particle board, plywood compact panel.
  • Durable – High-grade carbide tipped, maintain a sharper cutting edge in longer life.
  • Affordable – Direct Sale from manufactory, provide the best cost but remain in great quality.
  • User-Friendly – Universal 1/4 inch shank, perfectly fit most table router in North America.
Check Stock

BOSCH RA1054 Deluxe Router Edge Guide with Dust Extraction Hood & Vacuum Hose Adapter , Black

  • ADAPTABILITY: The router guide quickly and easily converts into circle guide for making arcs and circles up to 32 inch in diameter.
  • MULTI USE: For use with most Bosch routers, the guides cut along the work piece or up to 8 inches in from edge.
  • you’ll also have the freedom to do edge forming using non piloted bits.
  • ACCURATE: Precision fine-adjustment control for accuracy.
  • FUNCTIONAL: Keep work area clean with dust collection accessories.
  • KIT CONTENTS: Includes router guide, pivot plate, dust extraction hood, vacuum hose adapter, attachment hardware.
Check Stock