ReviewsEfficient Thread Cutting

uxcell Metric Machine Thread Milling Tap M8 x 1.25 H2 Titanium Coated Ti-coated High Speed Steel 3 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool

Thread Size: M8 x 1.25. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications..
The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps..
Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction..
Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.

Check Stock

Happybuy Hydraulic Pump Electric Double Acting Manual Valve Hydraulic Pump 10000 PSI Electric Hydraulic Power Unit for Home and Commercial Using (Double Acting)

Efficient Motor: Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable. Hydraulic pump working pressure: 2Mpa to 70Mpa. Rotate speed:1400r/min. Flow rate: 0.9L/min - 5L/min..
Large Capacity Tank: With a large fuel tank capacity, 8L, the hydraulic power pack is efficient. A visible window for monitoring the inside. The pump uses 16th hydraulic oil. It has the advantages of compact size, lightweight, simple structure, and ease of use..
Accurate Pressure Gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the hydraulic pump is working at any time. From 2Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
Effective Oil Volume: Manage this double-acting hydraulic gear pump by a lever which has a rubber cap in one end for a comfortable grasp and use. Control two equipment at the same time, pretty efficient. The oil pipe coupling is fitted with a PT3/8” thread..
Various Application: The manual hydraulic pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. ....

Check Stock

uxcell Metric Machine Thread Milling Tap M12 x 1.75 H2 Titanium Coated Ti-coated High Speed Steel 4 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool

Thread Size: M12 x 1.75. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications..
The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps..
Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction..
Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.

Check Stock

uxcell Metric Machine Thread Milling Tap M16 x 1.5 H2 Titanium Coated Ti-coated High Speed Steel 4 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool

Thread Size: M16 x 1.5. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications..
The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps..
Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Good for processing through holes or shallow holes.
Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.

Check Stock

Happybuy 10152 PSI Hydraulic Electric Pump 750W Single Acting 110V Solenoid Pedal 7L Hydraulic Power Pack Cylinder

Efficient Motor: Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable. Hydraulic pump working pressure: 2Mpa to 70Mpa. Rotate speed:1400r/min. Flow rate: 0.9L/min - 5L/min..
Large Capacity Tank: With a large fuel tank capacity, 7L, the hydraulic power pack is efficient. A visible window for monitoring the inside. The hydraulic pump tank uses the 15th hydraulic oil. It has the advantages of compact size, lightweight, and simple structure..
Accurate Pressure Gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the pump is working at any time. From 2Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
Effective Oil Volume: Manage this single acting electric oil pump by a lever which has a rubber cap in one end for a comfortable grasp and use. The high-pressure oil pipe is of high quality and durability. The oil pipe coupling is fitted with an M10 thread. Connector Type: 3/8" NPT ISO 14540 quick hydraulic coupler with dust cap..
Various Application: The pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending,....

Check Stock

M3 X 0.5 HSG D6 THREAD FORMING BOTTOM TAP HSS

Used with some cutting fluid or keep it wet when tapping, the tap will last longer..
Thread Forming Tap is suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron..

Check Stock

uxcell Thread Forming Tap M2 Thread 0.4 Pitch H2 HSS Titanium Coated

Used with some cutting fluid or keep it wet when tapping, the tap will last longer..
Thread Forming Tap is suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron..

Check Stock

Mobil Mobilcut 100 Aqueous Metal Working Fluids [5 Gal. Pail]

Step Drill Bit Best Friend: Evo Dyne’s Cutting Oil (8 fl oz) works under High Pressure on power, manual metal cutting, & drilling machines. Works great for all metals including stainless steel and titanium! With our aluminum cutting oil, not only does it lubricate to minimize tip welding, boosts machine finishing, prevents metal seizures & pitting, but it also provides the cleanest cuts on the market!.
Multi-Purpose Solution: Also known as a Cutting Fluid, our propriety formula improves the performance and Extends the Life of your drilling & cutting tools as well as power drills & machining equipment. Evo Dyne’s Cutting fluids provides the tack needed for hand drilling and thread cutting making for a safer working environment.
Improved Performance: Our aluminium cutting fluid for metal drilling reduces heat and damage caused by friction & also makes mechanical processing of metals easier. With the finest thread cutting oil on the market, you can ensure a high-quality finish of your work while prolonging the life of your equipment.
Cutting Oil Made Easy: For the best outcome, apply the Cutting Oil between the cutting tool and workpiece as needed through the duration of work. Maximize your speed and feed time with our simple to use threading oil. This....

Check Stock

XHMAXE 52pcs Stainless Steel Metric Imperial Screw Gauge, 55 Degree Multi-Purpose Screw Thread Pitch Cutting Gauge Measuring Tool

Perfect Combination: The set contains 3 x pitch gauges with 3 x center gauges and 1 x bore gauge, which are more convenient to use together and more versatile, making it easy for you to use.
Pitch Cutting Gauge: Our pitch cutting gauge includes different sizes of thread inserts, which can help you accurately measure internal and external threads, and can measure two screws to help you find the replaceable type.
Center Gauge: Hardened with ground edges and notches. Suitable for grinding and positioning thread cutting tools on lathes.
Drill Gauge: 17/64-1/2, 0.062-0.250 Bolt and wire diameter gauge, 29-hole sizes remain constant, providing precision accuracy. Hanging hole design, easy to hang.
High Quality Material: The screw thread pitch cutting gauge tool set is made of stainless steel, which is durable and rust-proof. Chrome-plated treatment, high strength, good resilience, beautiful appearance, effectively prolong the use time.

Check Stock

uxcell Thread Forming Tap M6 Thread 1 Pitch H2 Tolerance Titanium High Speed Steel

Used with some cutting fluid or keep it wet when tapping, the tap will last longer..
Thread Forming Tap is suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron..

Check Stock

JoyTube 35 Pcs Thread Repair Kit, Stainless M6 x 1mm Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing

【Drilling】Clear the damaged threads with a standard drill. Please pay attention that for fluteless taps bigger holes are required..
【Checking】Check that the thread and pitch of the tap and the bolt match..
【Tapping】Use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil)..
【Install】Place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Never work against the thread direction as the tang could break..
【Ideal Tool】M6 x 1mm Thread Repair Insert Kit is ideal for restoring damaged threads, stripped internal threads and creates a stronger internal thread in soft metals..

Check Stock