ReviewsElectrical Distributor

Ignition Distributor Cap and Rotor Kit, Replace D328A 10452458 D465 Compatible with Chevy GMC 4.3 Vortec - 1996-2005 Astro, 1995-2005 Blazer, 1995-2004 S10, 1999-2006 Silverado, 1995-2001 Jimmy, More

  • REPLACeMENT IGNITION DISTRIBUTOR CAP AND ROTOR KIT : The distributor cap and rotor kit is located under the car's hood. Open the hood and look for a black component near the centre of the engine. The distributor caps are stress-relieved immediately after molding to ensure dimensional stability. Symptoms of a bad or failing distributor cap: The CEL is illuminated, the vehicle does not start, the engine idles rough. If you find the distributor cap worn out or cracked, replace it immediately..
  • COMPATIBLE WITH CHEVY, OLDSMOBILE VEHICLES : 4.3L V6 Vortec engine - 1996-2005 Astro | 1995-2005 Blazer | 1996-1998 C1500 | 1996-2007 Express 1500 | 1996-2005 Express 2500 | 1996-1998 K1500 | 1996-1999 P30 | 1995-2004 S10 | 1999-2006 Silverado 1500 | 2007 Silverado 1500 Classic | 1996-2001 Bravada ignition distributor cap and rotor kit..
  • REPLACES PART # : D328A, 10452458, D465, 10452457 ignition distributor cap and rotor kit. It can compatible with GMC 4.3L V6 Vortec : 1996-1998 C1500 | 1995-2001 Jimmy | 1996-1998 K1500 | 1996-1999 P3500 | 1996-2005 Safari | 1996-2007 Savana 1500 | 1996-2005 Savana 2500 | 1997-2002 Savana 3500 | 1999-2006 Sierra 1500 | 2007 Sierra 1500 Classic | 1995-2004 Sonoma. Please check the detailed description to confirm the compatibilit....
Check Stock

ROADFAR Ignition Distributor Cap and Rotor Fit for DR475 Compatible with Chev-y Astro/Blazer/Express GMC Jimmy/Safari/Sierra/Sonoma 1995-2007

  • DISTRIBUTOR CAP FITMENTChevy Astro/ Blazer /Express GMC Jimmy/ Safari/ Sierra/ Sonoma 1995-2007.
  • REPLACEMENT PART NUMBERSDR475 12570426 1103417 1104078 1103976 1103917 12598210 01104078 93441559.
  • EXCELLENT PERFORMANCEConsidering the special environment of the distributor cap, we specially choose the material which can resist high temperature, vibration and high voltage current.
  • FAST INSTALLATIONThe replacement of the distributor cap is very easy and fast, but the spark plug wires must be connected to the new distributor cap in the same position.
  • REGULAR REPLACEMENTBecause the distributor cap is often affected by heat and vibration, the distributor cap will rupture, or carbon deposits on the cap will cause it to not work properly and start up difficult. So the old distributor needs to be replaced regularly.
Check Stock

1-Gang Electrical Box Extender with Machine Screws, Kit by DoodleYolk Inc. 5-Pack Junction Box Extension, 6-32 Truss Head screws. Extra Large Arlington BE1X ring better secures wiring devices

  • 5 Pack Arlington Electrical Box Extender with Extra Large Flange includes ten (10) 6-32 x 1-1/2” L.H. Dottie TMC632112 Truss Head Slotted/Phillips. Great for tile backsplash and over cut drywall openings. Single-gang with larger flange offers better device support in oversized or miscut wall openings, essential for tile kitchen installations and remodels..
  • 5 cajas de extensión Arlington delengüeta extra grande y 10tornillos Dottie de 6-32 x 1-1 / 2 “. Excelente para azulejos, paredes de tablas,remodelacionesy aberturas mal cortadas sobre paneles de yeso. Este extensorpermite al contratista cumplir con el artículo 314.20 del NEC de 2017.
  • UL and CSA Listed, industry standards for safety and quality. Arlington is a leading manufacturer of quality electrical products since 1949. Made In USA..
  • DoodleYolk Inc is the only distributor offering code compliant screws with low profile truss head to help you get a clean device fit. Everything you need in one package..
Check Stock

GARDENA Automatic 6 Zone Mechanical Water Distributor

  • Automatic Watering for up to 6 Areas: With the GARDENA Water Distributor Automatic, you can effortlessly water up to 6 plant areas in your garden one after the other. Enjoy more free time and healthier plants with this hassle-free watering system..
  • Easy to Operate: Deactivate non-required outlets with the setting lever for easy operation. The Water Distributor works mechanically and doesn't require a battery or power supply..
  • Compact and Flexible Design: The Water Distributor's six outlets are arranged in one direction, saving space and allowing for ground or wall mounting..
  • Full Control Timer Compatibility: Pair the Water Distributor with a GARDENA 1892 Timer and take control of your watering system and personalized watering schedules for each garden area..
  • Quality Made in Europe: The GARDENA Water Distributor Automatic is a high-quality product made in Europe, ensuring long-lasting and reliable performance..
Check Stock

NEW HOLLEY SNIPER EFI HYPERSPARK DISTRIBUTOR FOR CD IGNITION BOX, COMPATIBLE WITH CHEVY SMALL & BIG BLOCK

  • Brand New Holley Sniper EFI HyperSpark Distributor, Compatible with Chevy Small Block & Big Block (Part #565-300).
  • Features: Hall Effect crank trigger sensor housing provides a noise-free RPM signal to the Sniper ECU | Billet distributor housing provides corrosion resistance and stylish looks! | Patented Clear Installation cap eliminates any confusion while installing the distributor | Easiest plug and play way to add timing control to a Sniper EFI Installation | Distributor shutter wheel is pinned and welded to the shaft, for decades of reliable accuracy | Includes Wire Retainer for a clean installation |.
  • Comes with Cast Gear Installed - contact camshaft manufacturer for recommended gear material | Designed to be used with Sniper EFI HyperSpark CD box P/N 556-151 and Ignition Coil 556-152.
  • Specs: Brand: Holley Sniper EFI | Emission Code: 3 | Material: Shiny Billet Aluminum | Product Type: Distributor.
  • HyperSpark distributors are plug and play with all Holley Sniper EFI systems, featuring a high-quality billet distributor housing, hall effect crank trigger sensor, and they com....
Check Stock

Bernette B79 Sewing & Embroidery Machine Bundle with Premier Software & Designs

  • Bernette B37 Computerized Sewing Machine Bundle w/ 5 Pressure Feet Bundle. Bernette is owned by Bernina which means the machines are precisely manufactured down to the last detail..
  • Bundle includes 5 Snap-on Pressure Feet, 50 Preset Stitches Including Decorative & Quilting, 7mm Stitch Width.
  • LCD Display, 5 Different Buttonholes, Start/Stop Button, 500 Hundred Dollars in So Fontsy Design Access Cards - SVGs, JPGs, Monograms, Fonts, Images. Commercial Use ( Please note that the cards are only valid for the Card Redemption Section).
  • Included Accessories: Zigzag Foot (Preinstalled) * Satin Stitch Foot * Buttonhole Foot with Slide * Zipper Foot * Button Sew-on Foot * Bobbins (4) * Spool Pin Felt * Needle Set (3pc) * Second Spool Pin * Seam Ripper & Buttonhole Opener * T Screwdriver * Brush * Spool Disk Small * Spool Disk Large * Spool Net * Foot Control * Dust Cover * Power Cord.
  • Warranty: 5 Year Mechanical, 2 Year Electrical, 1 Year Labor & Lifetime Support. Fully authorized Bernina & Bernette Distributor.
Check Stock

WFLNHB 8Pin Distributor Adapter Obd1 to Obd2 Jumper Harness Dizzy fit for Honda Acura E3

  • This Distributor Adapter Fit For 1999-2000 Civic.
  • (Does Not Work For Dohc / Si Model)With An 8-Position Distributor Plug, To Plug Into A Obd1 (92-95) Distributor..
  • Package Included:1 X Distributor adapter.
Check Stock

Unlimited Rider Engine Harness OBD2 8-Pin to OBD2 10-Pin DISTRIBUTOR ADAPTER JUMPER HARNESS For HONDA Civic 1999-2000 Single Overhead Cam Civic with an 8-pin Distributor Plug 1.6L 1590cc

  • This adapter is made for a 1999-2000 single overhead cam Civic with an 8-pin distributor plug converting to a OBD2 10-pin distributor..
  • Plug and play, no modifications required.
  • This is an exact replacement DISTRIBUTOR ADAPTER JUMPER HARNESS for your model..
  • Trust this DISTRIBUTOR ADAPTER JUMPER HARNESS to work perfectly in demanding conditions..
  • PLEASE LOOK AT THE PICTURE TO MAKE SURE IT WILL ADAPTER TO YOUR DISTRIBUTOR, MANY THANKS..
Check Stock

51mm Coffee Distributor and Tamper, Espresso Distributor and Espresso Tamper, Espresso Distribution Tool for All 51mm Espresso Portafilter, Depth-adjustable Coffee Leveler, Detachable Tamper

  • ★Dual Head: Distributor/Leveler and tamper are designed in one, double sides are available. The unique four-page propeller design ensures that your coffee powder are balanced..
  • ★More Convenient: You can adjust the depth of this Espresso Distributor to the position you need. And with the scale, you only need to adjust one side, and the other side is adjusted to the corresponding position. Our espresso tamper is more convenient to use..
  • ★Safe Material: This coffee distributor is made of food-grade 304 stainless steel, it enables you to feel reassurance when you make espresso. Plus, every part of this espresso tamp is removable, this makes it easy to clean..
  • ★51mm Coffee Distributor & Tamper: This 51mm Coffee distributor and hand tamper are specially designed to work with all 51mm espresso portafilter, including Delonghi EC0680, EC0685 bottomless portafilter..
  • ★Simple to Use: With a simple twist to adjust the depth, then you can use the paddle surface to even out the coffee powder before tamping it with the flat surface. If you have any questions with the coffee distribu....
Check Stock

Bernette 37 Swiss Design Computerized Sewing Machine with Bonus Bundle

  • Bernette B37 Computerized Sewing Machine Bundle w/ 5 Pressure Feet Bundle. Bernette is owned by Bernina which means the machines are precisely manufactured down to the last detail..
  • Bundle includes LCD Display, 5 Different Buttonholes, Start/Stop Button, 5 Snap-on Pressure Feet, 50 Preset Stitches Including Decorative & Quilting, 7mm Stitch Width.
  • 500 Dollars in Designs in So Fontsy Design Access Cards - SVGs, JPGs, Monograms, Fonts, Images. Commercial Use ( Please note that the cards are only valid for the Card Redemption Section).
  • Included Accessories: Zigzag Foot (Preinstalled) * Satin Stitch Foot * Buttonhole Foot with Slide * Zipper Foot * Button Sew-on Foot * Bobbins (4) * Spool Pin Felt * Needle Set (3pc) * Second Spool Pin * Seam Ripper & Buttonhole Opener * T Screwdriver * Brush * Spool Disk Small * Spool Disk Large * Spool Net * Foot Control * Dust Cover * Power Cord.
  • Bonus: Clear View Bobbins (10) * Pre-wound Bobbins (8) * Sewing Thread Top Colors (6) * Portable Ironing Mat * Measuring Ruler * Organ High Quality Sewing Needles (10).
  • Warranty: 5 Year Mechanical, 2 Year Electrical, 1 Year Labor & Lifetime Support. Fully authorized Bernina & Bernette Distributor.
Check Stock

53mm Coffee Distributor & Tamper - Fits 54mm Portafilters - Adjustable Depth Espresso Tamper For Professional Espresso - Dual Head Leveler For Easy Hand Tamper Use

  • Enjoy Improved Espresso Shots - As you spin the coffee distributor, it evenly spreads grounds and fills gaps within the portafilter to reduce channeling and provide a smoother, richer shot..
  • Tamp Confidently - The adjustable tamping depth allows you to refine your desired pressure, and lock in the depth to produce repeatable results. When fully tamped, the collar will sit flush with your portafilter basket to ensure a level tamp and even water distribution across your coffee for a better extraction..
  • Quick and Easy Use - Our diamond pattern grip provides easy handling. With the compact 2-in-1 design, you can quickly move from distributing to tamping..
  • Know It Fits - Use the size chart in our product images to find the correct tamper size for your machine. The 53mm distributor and tamper fits machines with 54mm portafilters such as Breville Bambino, Breville Bambino Plus, Breville Barista Express, Breville Barista Pro, Breville, Barista Touch, Breville Duo-Temp Pro, Breville Infuser. Note: Breville 800 Series requires a 51mm distributor and tamper, and Breville Oracle Touch requires a 58mm distributor and tamper..
  • Our Promise to You - We are a family-owned brand focused on helping people make great coffee. If you are not happy with your 53mm distributor a....
Check Stock