ReviewsElectrical Equipment Tie downs

HLCC Complete Axle Strap Tie Down Kit with Car Tie Down Ratchet Straps, Includes (4) 22\ Axle Straps, (4) 36\ Axle Straps, and (4) 8' Snap Hook Ratchet Straps

  • Axle Strap Tie Down Kit - Complete kit includes (4) 22" axle straps, (4) 36" axle straps, (4) 8' snap hook ratchet straps. Straps are made of durable polyester webbing does not stretch when you tighten it down. It's a complete tie down kit, everything you need for securing a car or buggy to a trailer..
  • The Axle Tie Down Strap has a working load of 3,300 pounds and will not break during transport, ensuring the safety of cargo and equipment. Provides durable and reliable safety for heavy cargo transportation..
  • Car Tie Down Straps for Towing - Heavy duty ratchet with snap hook and D-ring can be attached to your car with the other end attached directly to the anchor point, which allows for a very stable and secure way to secure your car or tow it. Using 2 different sizes of axle straps, you can make a lasso around your tires..
  • Easy To Use - car tie down strap is easy to adjust the length, allowing you tie-down any cargo. 8 axle straps easily connect snap hooks, and ratchet locks secure cargo in the transport position, preventing them from being damaged or falling off..
  • Tie down strap is widely use, ideal for tie down trailer, hauling cars, moving cargo, motorcycles, trunk, bicycles, furniture, cargo, ATV, boats..
Check Stock

Jetski Ratchet Strap Tie Down Strap - Made in NZ - 1\ x 8\’ Heavy Duty Tiedown with Floating PVC Hook - for Jetskis, Seadoo, Waverunner & PWCs - 1,800lbs Break Strength - 1 Strap (Blue)

  • MADE IN NEW ZEALAND - All Aerofast products are manufactured in a state of the art factory using Swiss weaving equipment and UV stabilized polypropylene yarn imported from Spain. This means no damage from the sun. We use Thicker webbing for durability and heat seals to prevent and minimise fraying. You are buying directly from the manufacturer. These Jet Ski Tie Downs are designed for the tough USA conditions and made to last. We make the best sea toy accessories and do not compromise on quality.
  • QUALITY JETSKI, WAVERUNNER, PWC TIE DOWN KIT - These Tie Downs were designed specifically for Jetskis and Watercraft. They include a 3rd Hook for three point attachment, enables extra secure transport for your Jetski, Wave runner or Sea Doo on your trailer . These Tie Downs are designed with a Heavy duty rubber protector, permanently positioned behind the rachet to avoid damage to your watercraft..
  • SUPERIOR BREAK STRENGTH - The Break Strength for this product is 1,800lbs. Our Marine Tie Downs feature Polypropylene Yarn which does not stretch or lose its strength when wet - important for marine tie downs. All of our Tie Downs go through rigorous testing in our New Zealand factory to ensure that they meet the highest standards of durability, giving you peace of ....
Check Stock

Boat Tie Down Straps to Trailer | Boat Transom Tie Down Straps Made in New Zealand with Superior Strength of 2,400lbs UV Treated | 1\ x 2.5’ Heavy Duty Ratchet Boat Straps Trailer Tie Down (Pack of 2)

  • ...by sliding the ratchet up or down. Then tighten by pulling the ratchet handle up and down until the tie-down is tightly secured. Do not over tension as this could damage your watercraft..
  • Made in New Zealand - Our boat trailer transom tie down straps are manufactured in a state of the art factory using Swiss weaving equipment and UV stabilized polypropylene yarn from Spain. This means no damage from the sun. We use thicker, heavy duty webbing for durability and heat seals to prevent and minimise fraying. These boat trailer tie down straps have been designed for the tough USA conditions and made to last..
  • The Aerofast Guarantee - We live and breathe boat trailer tie-downs and we are the market-leading manufacturers of boat tie downs in New Zealand and Australia. Our reputation is built on the durability and reliability of our products. We are so confident that you will be 100% happy with our products, that if you are not, we'll refund your purchase! To order your Boat Transom Tie Down Straps, Click Add to Cart Now!.
Check Stock

Opiytou 78in Battery Tie Down Strap, Battery Box Hold Down Lashing Straps Kit with Stainless Steel Cam Buckle, Stainless Steel Deck Loop Mounts, SS Screws

  • [Battery box tie down kit includes] 2pcs 78inch Lashing straps with stainless steel cam buckles.
  • [Premium 600D webbing strap] The lashing straps are anti-UV heavy -duty nylon straps, not PP straps.
  • lashing straps are more denser and wear-resistant than ordinary ribbon.It is very suitable for battery box, tool box gas fuel equipment, tie down straps to fix them on your RV or boat or camper, so that the equipment will not slide everywhere.78 inch Lashing strap, easily cut to desired length..
  • [No Rust-Safe and durable] The zinc alloy press buckle tie down kit can effectively prevent rust and more sturdy.Cam buckles, deck mounts and SS screws are stainless steel 316.Suitable for salt water environments.strong corrosion resistance..
  • [Easy to operate] The buckle is designed with sturdy gears, which can be quickly in place removed for fixing and adjustment. Never fall off, good flexibility, easy to store, does not take up space..
  • [No-hassle buy] We are confident with the quality of our secure tie down straps. If you are not completely satisfied with battery straps, please contact us at any time! We will provide you with best customer service..
Check Stock

Boat Tie Down Straps to Trailer (Pack of 2) - 2,400lbs Break - 1" x 2.5’ Heavy Duty Ratchet Boat Straps - UV Treated Boat Transom Tie Down Straps - Jet Ski Tie Down Straps - Made in New Zealand

  • ...ten by pulling the ratchet handle up and down until the tie-down is tightly secured. Do not over tension as this could damage your watercraft..
  • Made in New Zealand - Our boat trailer transom tie down straps are manufactured in a state of the art factory using Swiss weaving equipment and UV stabilized polypropylene yarn from Spain. This means no damage from the sun. We use thicker, heavy duty webbing for durability and heat seals to prevent and minimise fraying. These boat trailer tie down straps have been designed for the tough USA conditions and made to last..
  • The Aerofast Guarantee - We live and breathe boat trailer tie-downs and we are the market-leading manufacturers of boat tie downs in New Zealand and Australia. Our reputation is built on the durability and reliability of our products. We are so confident that you will be 100% happy with our products, that if you are not, we'll refund your purchase! To order your Boat Transom Tie Down Straps, Click Add to Cart Now!.
Check Stock

Heavy Duty 1,200lb. Workload Soft Loop Tie Down Straps for Towing or Trailering ATV, UTV, Motorcycle, Lawn Garden Equipment (Set of 4) (18 Inches, Black)

  • Stitching detail: Adopt special weaving method in case loosens.The webbing with solid center seam and cross stitching..
  • Abrasion Resistance: These straps are sturdy but very pliable, they will not scratch handlebars & frames of your vehicles or equipment..
  • Heavy Duty: Made of thick nylon. Each having 1200 lb. working load capacity. According to the needs, they can be increased the length as an extension tie-down by connected, or use more than one tie down to secure a larger load..
  • Excellent Design: One end is flat and the other is twisted. Twisted design allows the tie down to be looped through itself without having a bend in the other portion of the strap,convenient to use..
  • Multiple Uses: Set of 4. Each 18" long and 1" wide. Ideal for securing a motorcycle, bicycle, lawn/garden equipment, scooters, and more during trailering..
Check Stock

Stainless Boat Tie Down Straps to Trailer (Pack of 2) - 2,400lbs Break - 1" x 4’ Heavy Duty Ratchet Boat Straps - UV Treated Boat Transom Tie Down Straps Jet Ski Tie Down Straps - Made in New Zealand

  • ...ten by pulling the ratchet handle up and down until the tie-down is tightly secured. Do not over tension as this could damage your watercraft..
  • Made in New Zealand - Our boat trailer transom tie down straps are manufactured in a state of the art factory using Swiss weaving equipment and UV stabilized polypropylene yarn from Spain. This means your boat transom straps will not be damaged from the sun. We use thicker, heavy duty webbing for durability and heat seals to prevent and minimise fraying. These boat trailer tie down straps have been designed for the tough USA conditions and made to last..
Check Stock

Heavy Duty 1,200lb. Workload Soft Loop Tie Down Straps for Towing or Trailering ATV, UTV, Motorcycle, Lawn Garden Equipment (Set of 8) (18 Inches, Black)

  • Stitching detail: Adopt special weaving method in case loosens.The webbing with solid center seam and cross stitching..
  • Abrasion Resistance: These straps are sturdy but very pliable, they will not scratch handlebars & frames of your vehicles or equipment..
  • Heavy Duty: Made of thick nylon. Each having 1200 lb. working load capacity. According to the needs, they can be increased the length as an extension tie-down by connected, or use more than one tie down to secure a larger load..
  • Excellent Design: One end is flat and the other is twisted. Twisted design allows the tie down to be looped through itself without having a bend in the other portion of the strap,convenient to use..
  • Multiple Uses: Set of 4. Each 18" long and 1" wide. Ideal for securing a motorcycle, bicycle, lawn/garden equipment, scooters, and more during trailering..
Check Stock

Aerofast Ratchet Tie Down Straps For Motorcycles | New Zealand Made Motorcycle Tie Down 1.5\ x 8\ Heavy Duty Dirt Bike Tie Down Straps with Soft Loop & Swivel Carabiner | 3,000lbs (2 Pack) Black Color

  • Motorcycle Straps Made In New Zealand - Our motorcycle tie downs are manufactured in a state of the art factory using Swiss weaving equipment and UV stabilized polypropylene yarn from Spain. This means no damage from the sun. We use thicker, heavy duty webbing for durability and heat seals to prevent and minimise fraying. These motorcycle straps and tie downs have been designed for the tough USA conditions and made to last..
  • The Swivel Carabiner on the motorcycle tie down straps prevents the webbing from twisting. The mx tie downs Safety Swivel Carabiner ensures the webbing is tensioned in a straight line and will not jam in the ratchet mechanism on your moto straps. The safety mechanism on the Swivel Carabiner ensures your motorcycle, UTV or ATV stays secure when transporting even over rough terrain..
  • Superior Break Strength - The Break Strength for the dirt bike ratchet straps is 3,000lbs per Tie Down or 6,000lbs per pair. All of our Tie Downs components from the ratchet to the tie down loops go through rigorous in-house testing in our New Zealand factory to ensure that they meet the highest standards and bring you superior break strength that will give you peace of mind that your Motorbike, ATV or UTV is always safely secured to the trailer or vehic....
Check Stock

DC Cargo Mall 4 D-Ring Tie-Down Anchors, Round Bolt-On Cargo Tie-Down Flush Mount D-Rings, Strong Steel Tie-Down Anchor for Truck, Trailer, Flatbed, Pickup Bed (4)

  • When You Need To Safely Transport Your Motorcycle, snowmobile, kayak, landscaping equipment, farm tools, and other cargo, these FOUR reliable Flush Mount Tie Down Anchor D-Rings are the Most Reliable Tie-downs.
  • they are Simple To Install and Offer A Lifetime Of Dependable Strength! NOTE: mounting hardware is not included in THIS product..
  • Click The Images for a DETAILED SKETCH with all DIMENSIONS of these D-ring pan fitting tie-downs. Includes 4 round 4-1/4" diameter Pan Fitting D-Ring Trailer TIE-DOWN ANCHORS. They are made out of Galvanized Steel That Ensures Superior Strength And Corrosion- & Rust-Resistance with an assembly break strength of 1,200 pounds and a Safe Working Load Limit of 400 pounds.
  • Installing These DURABLE Cargo Tie-Down Anchors into the floor of your mounting area is SIMPLER than you make think. Follow the directions provided in description below. The 2 1/4" diameter bolting holes keep these tie-downs even with your mounting surface so No Tripping, and the slots on bottoms let water drain out.
  • These Tie-Downs Can Be Used Easily In So Many Custom Ways. ANCHOR tie-downs, S-hook or J-hook ratchet and cam straps, tarp straps, bungee cords, motorcycle tie-downs, clevis grab hook chains, ropes, and nylon soft loops on Pickup Truck Beds, ....
Check Stock

Eight Recessed Tie-Down D-Rings Square Trailer Cargo Tie-Down Anchors Mounting Lock Plate + Installation Bolting Hardware Accessories - Carriage Bolts Hex Nuts Flat Washers

  • This is the COMPLETE INSTALLATION BUNDLE. When you need to safely transport your motorcycle, snowmobile, landscaping equipment, farm tools, and other gear, these large recessed tie-down anchor D-rings are the absolute elite in superior tie-down anchors.
  • they are easy to install and offer lifetime strength and versatility.
  • the mounting plates offer incredible support to these trailer tie-down anchors, spreading the load over a larger area!.
  • See images for a DETAILED SKETCH + HOW-TO showing all DIMENSIONS + INSTRUCTIONS of these D-ring pan fitting tie-downs and back plates.
  • bundle includes 8 square 4-3/4" x 4-1/2" galvanized steel recessed-pan fitting D-ring trailer tie-down anchors with holes on the bottom of the pans that ensure water weeps out (assembly break strength of 6,000 pounds and a safe working load limit of 2,000 pounds), + 1/10" thick black steel trailer plates + bolting hardware.
  • Square 1/2" x 1/2" diameter bolting holes are PERFECT for securing with the PROVIDED Grade A ASTM A307 2.5" long 3/8" diameter carriage head bolts, hex nuts, 3/32" flat washers.
  • These tie-downs can be used in so many CUSTOM ways! Easily anchor logistic tie downs, S-hook or J-hook ratchet and cam straps, tarp straps, bungee cords, motorcycle tie-downs, clevis grab ho....
Check Stock