ReviewsElectrical Insulation Coating

APT, 1 mil Thick Polyimide Adhesive Tape, HighTemperature and Heat Tape, for Masking, Soldering, Electrical, 3D Printer Application. (2\x 36 yds)

  • 【Wide Area of Applications】-Used for electronic products, soldering, circuit boards, manufacturing, fiber optics cable, insulating circuit boards, ground barrier & insulation for coils, 3D printing, high temperature sublimation powder coating, etc..
  • 【High Temperature】- APT Polyimide tape has highly excellent heat & solvent resistance. Minimal shrinkage after baking and clean removal, and also shows the great electrical insulation. It maintain high-temperature resistance as high as 400F (260℃)..
  • 【Clean Removal, No Residue】- Our high temperature tape can withstand up to 400F (260℃) degrees. Remove cleanly, leaves no residue..
  • 【No Shrinking, Curling, Or Lifter Edges】- Made with high temperature silicone adhesive and premium film. Our tape resists curling, shrinking, and lifted edges every time..
  • 【Trusted Every Where】- Our tape do not contain any harmful chemicals, and complies with RoHs & Reach requirements. It is rigorously tested and meets American Society for Testing and Materials D-5213 standard, for high performance every time..
Check Stock

Electrical Tape Black Waterproof PVC - 0.75In 65ft High Temp Weatherproof Bulk Vinyl Heavy Duty Electric Insulation Tape for Indoor Outdoor, Wrapping Wiring Harness, Auto Electrical Protection

  • [About Goods] Each roll professional black PVC electrical tape is 65 ft long and 0.75 in wide, composed of PVC film and rubber adhesion.
  • [Weatherproof＆Waterproof] All-weather electrical tape, used in indoor and outdoor, has excellent resistance to abrasion, corrosion, UV, water, moisture, high and low temperature, inhibits corrosion of electrical conductors.
  • [Flexible&High Tensile Strength] Strong stretchability electrical tape is conformable, flexible, soft and high elastic, stretches well and gives an effective and long lasting insulation protection.
  • [Frame Retardant] High temp electrical tape with temperature up to 176℉, high performance in frame retardant and fireproof.
  • [Wide Application] Used for sealing and insulation protection with voltage up to 600V, wrapping wires and cables, electrical installation, maintenance and manufacturing engineering.
Check Stock

GENNEL Black Electrical Insulating Cloth Tape, 0.3in x 100ft (8mm x 30M) Acetate Fabric Adhesive Tape for Laptop Motor Wire Harness Winding Transformer Stage Guitar Pickup Repair Bookbinding

  • Electrical Insulation: Can be used for Insulation protection of wire joints, various electronic parts. Insulation Resistance 003e1000000 ohm. Also has fabric soft, Anti-aging, voltage resistance, corrosion resistance, wear resistance, easy punching and other properties..
  • Strong Adhesion and Wear Resistance: Electrical tape has strong for wearability and durability, Can stick to most surfaces, stick firmly, no residual glue. Adhesive Force: 4.0N/10mm ,Peel Strength: ≥300N/M ,Tension Strength: 600N/10mm..
  • High Temperature Resist: Heat Resistant Tape can withstand temperatures up to 130℃, suitable for unfriendly, hot environments, can use it in a car's engine compartment and LED light or similar high temp environment..
  • Wide Range of Use: Laptop, Phone, Screen, Electrics Repair, Automotive Wire Harness winding, Electrical Insulation, Bookbinding, Guitar Pickup, Transformer, Computer, Motor, Coils, Voltage Regulators, Capacitors, Power Inverter Adapter Wrapping, stage marking..
  • Material and Size: Acetate cloth tape, 0.3in x 100ft or 8mm x 30m (W x L).
Check Stock

11209 Plasti Dip Clear Multi-Purpose Rubber Coating Aerosol - 11 oz.

  • Works on new and old treasures and easily peels for removal or reapplication for a fresh, new look.
  • Easy to peel coating from most surfaces when you're ready to remove.
  • Easy and convenient to use with the a comfort spray tip.
  • Resists moisture, acids, abrasion, and corrosion to keep items looking fresh and renewed.
  • Provides non-skid, comfortable, protective Grip that increases safety.
  • Provides excellent insulation properties and protects from electrical shock, eliminates vibration, and deadens sounds.
  • Apply to anything that paint is applied to and more.
  • Protects coated items against moisture, acids and corrosion.
  • Provides a non-slip, comfortable and controlled grip.
  • Remains flexible, stretchy and will not crack or become brittle in extreme weather conditions.
Check Stock

Ajax Scientific - EL236-0000 DPDT Knife Switch

  • Double-pole, double-throw electrical switch for making and breaking two simultaneous electrical connections.
  • Posts with knurled nuts for securing electrical wire to knife switch.
  • Bakelite base for insulation from electrical current.
  • Screw holes for mounting base to bench or panel.
Check Stock

Micarta Paper XX Phenolic Sheets .188\ (3/16\) Thick x 12\ x 36\ 3 pcs

  • Bakelite is a man-made synthetic chemical substance. Once it is heated and formed, it will solidify and can no longer be molded into other things. Because it has the characteristics of non-absorption, non-conductivity, high temperature resistance, and high strength, it is widely used in electrical products..
  • Bakelite board is also called phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

Electric Water Pipe Heating Cable with Thermostat for Pipe Freeze Protection, 6ft 120V Snow De-Icing Cable with Build in Thermostat, Pipe Warmer, Heat Pipe Tape - CSA/ETL Listed

  • ✅ 003cb003e[100% Money-Back Guarantee] 003c/b003e--Customer satisfaction is our priority. If for any reason you're not completely satisfied, you can ask for a replacement or full refund, no questions asked. Buy with confidence!.
  • ✅ [High quality]--UL, ETL and CSA certified,more safer to use.Industrial grade heat shrinkage tube for connection.Each Cable consists of tough XLPE inner insulation, AL foil, a continuous ground braid as well as weather and non-supportive climatic conditions resistant PVC (high-low temperature) outer coating. Can convert 100% of electrical energy into heat without energy loss..
  • ✅ [Note]--Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight. If the ambient temperature is lower than -20°F(-29°C), please use 1" thick insulation material..
  • ✅ [Application]--Suitable for use on water filled plastic ((including PEX)and metal water pipes(including copper, galvanized, ABS plastic, PVC plastic pipes, etc).Not use for empty water pipes, fuel lines, hoses, gutters, steam lines and so on.Keeps water flowing down to -40℃..
Check Stock

Maveek 2 Rolls Electrical Tape 2 Inch Silicone Waterproof Repair Insulation Tape Roll White Colored, Self Adhesive Outdoor Indoor Garage Workshop Tools Bag Pipe Door Window Winter Cold Weather

  • Electrical tape set: 2 rolls of good quality white tape.
  • Made of Thick & Strong PVC, sticks very well, good quality and durable, sticky.
  • Fit for indoor and outdoor, insulation protection of electrical wires and harness in automobile industry.
  • Used for electrical insulation as well as various other uses around the home.
Check Stock

Shorpioen 100-Pack 1/4 x 1-3/4 Concrete Screw Hex Flanged White No Drill Bit BC-1428CNHFW

  • ...e, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Hole should be of a depth equal to the required embedment plus 1/2”.
  • The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Check the Item Description to see if a drill is included as well..
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of the material in which they are installed..
Check Stock

GOONSDS Bakelite Board 2PCS Laminate Raw Materials for Laboratory and Silicone Rubber Mold,10x100x150mm

  • Bakelite is a man-made synthetic chemical substance. Once it is heated and formed, it will solidify and can no longer be molded into other things. Because it has the characteristics of non-absorption, non-conductivity, high temperature resistance, and high strength, it is widely used in electrical products..
  • Bakelite board is also called phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

uxcell Heat Shrink Tubing 2.5mm Dia 2:1 Heat Shrink Tube Wrap Cable Sleeve 1m Clear

  • Diameter(Before Shrinking): 2.5mm / 0.1".
  • Operating Temperature: -55 to 125 Degree Celsius.
  • Minimum Shrinkage Temp: +70 Degree Celsius.
  • Full Shrinkage Temp: +125 Degree Celsius maximum..
  • Heat shrink tubing is good useful, of the specification of good electrical insulation, corrosion resistance and high temperature resistance..
  • Widely Applications: Electrical Insulation, Wire Protection, Cable Bonding, Data Cable Decoration, Color-Coding, Wire Marking, Wire Bundling & more..
Check Stock