ReviewsElectrical Interface

Brother P-Touch PC Connectable Label Maker (PT-P700)

A versatile desktop label printer for labeling workplace assets such as IT and electrical equipment as well as paperwork, files, signage and storage.
Operating systems: Windows 7, Windows 8, Windows Vista and Mac v10.6x, 10.7x, and 10.8x..
USB interface: USB 2.0 (Mini-B type connector).

Product: IR Infrared Remote Control Receiver Cable.
Wide angle, strong signal, long distance. Resistant to ambient light effects. Works with all 38-56kHz IR remote control and devices with an IR input port..
Wide voltage adaptation, low power consumption, high sensitivity, excellent anti-interference characteristics, tiny, elegant stick-on design..
Widely used in set-top boxes, LED light bar controllers, driving recorders, digital photo frames, household appliances, and other various products to assist in extending remote control reception..
Note: Please confirm whether the electrical equipment has an infrared interface and confirm the size of the infrared interface. Stick the infrared received head to the side of the IR sensor, do not cover it, otherwise, the remote control will be insensitive..

Variable speed technology costs significantly less to operate. Savings based on variable speed pump compared to a single-speed pump running 12 hours per day at an average of $0. 16 per kWh in a 20, 000 gallon..
Ideal for standard pools requiring up to 1. 5 hp pump.
Real-Time clock with 24-hour memory retention.
Simple, intuitive user interface is easy to program and operate.
easy to access electrical connections for simple installation.
Three operating speed settings plus override capability.

Solid State Relay Module Board has been assembled, and electrical test passed.
Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch).
Has been assembled, and electrical test passed. Led indicator for each relay. Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch) Input control signal voltage: 0V - 0.5V Low stage (SSR is OFF), 0.5V - 2.5V (unknown state), 2.5V - 20V High state (SSR is ON).
Load voltage range: 75 to 264VAC (50/60Hz).
Load current: 0.1 to 2 AMP Standard interface that can be controlled directly by microcontroller (Compatible with Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).

❤Electrical plug:USB 5V and power shifter(The current of USB interface of general mobile should be lower than 500MA).
❤Battery: 1.5V, 3 * AA batteries.(Package not include the battery).
❤How to use: Use the 3 * AA Battery Or the USB..
❤Outer size:115mm x 110mm x 135mm/4.49” x 4.29” x 5.27”(approx).

Upgraded Product: The Electrical Tester diagnose 12V charging systems, starting systems and condition of discharged battery, which are previous model AL519 can’t do..
OBD2 Functions: Complete OBD2 functions includes reading diagnostic trouble codes (Pending, permanent, current codes), live data stream, freeze frame data, vehicle information, I/M readiness, O2 sensor test, On-board monitor test, Component test..
Facilitate Repair Work: Besides complete OBD2 functions, this car scanner supports DTC Lookup for DTC definitions and printing via PC, which is convenient for getting the required information to help facilitate your repair work..
Practical Hot keys: I/M hot key allow you to quick enter I/M readiness interface for quick state emission readiness check and drive cycle verification..
Favorable Design&Price: Bright color coded LEDs and built-in speaker provide both visual and audible tone for readiness verification. Cost-effective when compare with similar code reader for gaining the electrical test function..

[All Functions in Your Hand] - The KZYEE KM10 Power Scan Kit is the revolutionary circuit tester for 12-24V vehicles. You can access four precise diagnostic modes (DC Voltage, AC Voltage, Resistance and Diode), providing efficient electrical system testing, continuity testing, fault diagnosis, ground testing without fuses, component activation on and in the vehicle, and voltage detection. It is the perfect tool for all automotive electrical needs..
[Built-in Diagnostic Power] - With the press of a switch, you'll have an instant hot lead or ground lead. Use the probe tip and ground lead together to power up components in your hand. Easy to apply, it can power components such as radiator fans, starter motors, relays, window regulators, and windshield wipers. Quickly check components for continuity, identify positive, negative and open circuits, and locate shorts without wasting fuses..
[Best Repair Assistant for You] - Intuitive interface, the KM10 probe tester is an essential tool for automobile user to check system failure by themselves. The power circuit probe kit can also perform continuity and resistance checks, checking for the good and bad grounds, which a....

Variable speed technology costs significantly less to operate. Savings based on variable speed pump compared to a single-speed pump running 12 hours per day at an average of $0. 16 per kWh in a 20, 000 gallon..
Ideal for standard pools requiring up to 1. 5 hp pump.
Real-Time clock with 24-hour memory retention.
Simple, intuitive user interface is easy to program and operate.
easy to access electrical connections for simple installation.
Three operating speed settings plus override capability.

EMBEDDED WEB SERVER - You can set up Shelly without the need of any additional controller or hub, thanks to the embedded web interface..
COMPACT DESIGN - Shelly 2.5 has been designed for installation in a limited space, such as wall mounts, electrical control panels, etc..
COMPATIBLE for two electrical circuits (up to 2.3 kW each) with energy consumption monitoring for each channel, overload, and temperature protection..
BI-DIRECTIONAL MOTOR CONTROL MODULE - for drapes, blinds, garage doors, etc.)..
STANDALONE DEVICE - can function as a standalone device, as an accessory to a home automation controller, or it may be used as another automation system’s component..

Product 1: Build over 750 experiments with 80 parts.
Product 1: Experiments include: sound activated switch, Lie detector, adjustable light controller, Am radio, rechargeable battery and many more!.
Product 1: Parts included: Photo resistor, power amplifier, variable capacitor, Analog meter, solar Cell, computer interface, full color manuals.
Product 1: No soldering - no tools - it's a snap! Snap Circuits parts require no tools and and click together to ensure solid electrical connections.
Product 2: NO BATTERIES needed for Snap Circuits projects.

❤Electrical plug:USB 5V and power shifter(The current of USB interface of general mobile should be lower than 500MA).
❤Battery: 1.5V, 3 * AA batteries.(Package not include the battery).
❤How to use: Use the 3 * AA Battery Or the USB..
❤Outer size:115mm x 110mm x 135mm/4.49” x 4.29” x 5.27”(approx).