ReviewsElectrical Solder

SONEAK 60/40 Tin Lead Solder With Rosin Core For Electrical Soldering 1.0mm 50g

★ Tin Lead Solder Wire: High quality Rosin Core Solder Wire.
★ Sn60-Pb40 Solder: Sn 60%- Pb 40%, Flux 2.0%.
★ Lower Melting Point: 361F/183C, easy to be soldered, flows smoothly, soldering fast and strong shiny soldering point.
★ Special Features: This SONEAK 1.0mm solder wire offers lower temperature melting, pretty good flow,clean, less smoke, reliable and nice soldering joint.
★ Applications: Very good soldering capability for electrical soldering, esp DIY project, Home improvement, Maintenance of sterro, toys, TV circuit boards etc. repairing.(Warning: This product can expose you to lead which is know to the State of Califormia to cause brith defects or other reproductive harm. For more information go to the offical Proposition 65 Warnings website).

Check Stock

Cardas Soldering Wire Quad Eutectic Silver Solder with rosin flux 1/4 lbs (113g) roll

【PARAMETER】Solder Wire Diameter 0.031"/0.8mm, Gross Weight 0.11lbs/50g..
【ADVANTAGES】High Purity Raw Material, Flow Well, Strong Solder Joints, Less Residue, No-Cleaning, Low Melting Temperature.
【OTHER FEATURES】Excellent Electrical Conductivity and Thermal Conductivity, Good Solderability.
【WIDE APPLICATIONS】Soldering Training Course, Home Appliances Repair, Toy Repair, Other Electronic Devices Repair, Electronics DIY, Wire Harness Connection, Battery & Motor Wire Connection, etc..

Check Stock

0.4mm Solder Wire Ultra Thin Gauge 0.015 inch Diameter Rosin Core Lead-Free 1.76oz 50g Sn99 Ag0.3 Cu0.7 Activated Electronics Soldering Fine Electrical Solder Flow Flux

0.015 inch Diameter, Extremely Thin gauge solder wire, great for fine soldering work with small soldering space.
No fractures issue, no Corrosion, well designed with alloy materials, excellent for electronics soldering.
418 Deg.F (215 Deg.C) melting temperature point, shorter solder time, avoid soldering damage.
Sn99 Ag0.3 Cu0.7 Allow soldering wire, good electrical conductivity, high quality solder joints.
RoHS compliant, No Lead solder with Rosin core, Longer lifetime, no clean solder wire.

Check Stock

BANIGIPA 63-37 Tin Lead Rosin Core Solder Wire for Electrical Soldering, Flux 1.8%, Fast Soldering, Low Melting Point, Flows Well, Strong Hold Point, Shinny Solder Joints, Easy to Use(0.8mm&Net 50g)

√ Tin Lead Solder Wire: High Quality Rosin Core Solder Wire.
√ Parameters: solder wire Tin 63%- Lead 37% (Sn63-Pb37).
√ Flux content 1.8%，electrical soldering wire dia is 0.8mm (0.0315inch)，gross weight 50gram (0.11lbs),good size for pocket.
√ Low Melting Point: 361F/183C. easy to be soldered, flows smoothly, soldering fast and strong soldering point..
√ Applications: Very good soldering capability, esp for circuit board, DIY, home improvement, Repairation of cable/TV/Radio/sterro/ Toys and other electrical devices etc. (WARNING: This product can expose you to lead, which is known to the State of California to cause brith defects or other reproductive harm. For more information go to the offical Proposition 65 Warnings Website).

Check Stock

XUUAP 100pcs Solder Seal Butt Connectors 26-24 AWG White, Waterproof Heat Shrink Wire Connectors, Automotive Marine Electrical Terminals (24 26 Gauge)

Low Temp Self Soldering : with one step, you get a soldered, sealed, and insulated connection..
Shrink Tube is Thicker: Excellent stretch and mechanical damage resistance. Quality and durability is outstanding!.
Waterproof : Low heat solder and hot melt adhesive can produce perfect seal, protect electrical connections..
Easy to Use: Simply position the stripped wires into the solder sleeve and apply heat to finish the connection. Makes butt connections a breeze. Electrical work gets cut in half!.
Compliant with All Relevant Standards: Compliant with ROHS, ISO 9001:2008, SGS and CE standards..

Check Stock

XUUAP 100pcs Solder Seal Butt Connectors 22-18 AWG Red, Waterproof Heat Shrink Wire Connectors, Automotive Marine Electrical Terminals (18 20 22 Gauge)

Low Temp Self Soldering : with one step, you get a soldered, sealed, and insulated connection..
Shrink Tube is Thicker: Excellent stretch and mechanical damage resistance. Quality and durability is outstanding!.
Waterproof : Low heat solder and hot melt adhesive can produce perfect seal, protect electrical connections..
Easy to Use: Simply position the stripped wires into the solder sleeve and apply heat to finish the connection. Makes butt connections a breeze. Electrical work gets cut in half!.
Compliant with All Relevant Standards: Compliant with ROHS, ISO 9001:2008, SGS and CE standards..

Check Stock

E-VOLT Solder Seal Wire connectors – 120 PC Low Temperature Melt Soldering Wire Terminals – Industrial Grade Insulated Connectors for Marine and Automotive

EFFICIENT SOLUTION: E-Volt’s offer’s butt soldering connectors to set up reliable and long lasting joints. It will save you from frustrated and time taking process of making alloy joints by using soldering iron..
MINIMIZE MALFUNCTIONS: Our weather resistant low temperature waterproof solder wire connectors are adhesive lined tubes which will protect joints from fluids, humidity and wet environment. E-Volt’s heat shrink connecting tubes will ensure that there will be minimal equipment malfunctions..
DURABLE SEALED SOLDER TERMINAL: Strong and better protected joints will ensure continuous connection with minimum voltage loss. ISO certified heat shrink tube connector will not only make joint strong but will prevent wire corrosion and superior current flow..
ISO CERTIFIED PRODUCT: Our electrical connectors are in compliance with ISO 9001:2008, ROHS, SGS and CE. E-Volt heat shrink butt terminal passes the toughest quality assurance tests before they went out of the manufacturing plant..
SECURE CASE: E-Volt’s solder seal connectors are packed in a durable and translucent jar with screw lid. Your heat shrink electrical connectors will stay organized and safe from dust, dirt and water..

Check Stock

Interpower 86291290 North American Connector Power Cord, Angled IEC 60320 C13 Connector Type, Black Cable Color, 10A Amperage, 250VAC Voltage, 3.05m Length

IEC 60320 Sheet F, snap-in, four-position accessory module for a variety of electrical applications.
International current and voltage rating of 10 amp at 250 VAC, North American rating of 15 amp at 250 VAC.
Thermoplastic housing for electrical and thermal insulation, with tin-plated brass terminals for conductivity and resistance to corrosion.
Temperature range of -25 to +70 degrees C.
Snap-in mount with three quick disconnects and three solder tabs for attachment of conductors with wire terminals or with solder.

Check Stock

Whizzotech Solder Wire 60/40 with Flux Rosin Core for Electrical Soldering 4oz/100g/0.22lb Diameter 0.032 Inch/0.8mm

Tin Lead solder wire alloy content, Tin 60%-Pb 40% (Sn60Pb40), Flux 1.7%.
High quality rosin core solder wire. The Soldering Wire has antioxidant for a long time and good weldability, melts quick and clean, flows smooth.
Good soldering kit for electrical soldering.
Low Melting Point, 370℉. Weight, 4oz (100g). Diameter, 0.032 In (0.8 mm).

Check Stock

MEGA2560 Screw Terminal Block Breakout Module with Aluminum Enclosure, for Arduino MEGA 2560 R3

...reak when the screws are tightened,will not lose or slip around.The leads are aligned for a standard breadboard and fit securely.The pins themselves are slim enough to fit through the holes,doesn't destroy the plating on the inside..
Won't lead to strip screw heads,broken solder joints or poor connections.Makes good electrical contact,looks good and neat.Not allow the wire to get off-center when inserted.The connector will not melt things when soldered to them.They are not too thick that fit perfectly next to each other on a protoboard.You can jam them in there and they sit parallel..
Easy to insert into prototype boards and solder the pins.These connectors work well on PCBs.Can be used on a breadboard power rails if plugged in at an angle.The screw connections can open enough to let a wire enter freely,doesn't make it difficult to enter and tighten the wires.Make it easier to swap out things like simple antennas,low voltage power sources,sensors,ect..
Needn't over-torque the screws and they will hold up fine.When you want to move wires,wires come right out with the slightest movement.Great for mounting on or in buildings to attach wires for lighting,so you don't half to desolder delicate LED lead wires every time when want to move a building.Their use ....

Check Stock

TOWOT 63-37 High Purity Tin Lead Rosin Core Solder Wire for Electrical Soldering, 3 PCS (0.8 mm/10 g) 10 g Tin Lead Rosin Core Flux Iron Welding Tool

Recommended Melting point: 183°C(361°F ).
Good solder ability both in electrical conductivity and thermal conductivity.
Easy to use, be widely applied in electrical repairs(WARNING: This product can expose you to lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to the official Proposition 65 Warnings Website).

Check Stock