ReviewsElectrical Studs

Zircon StudSensor e30 Electronic Stud Finder

Locates the edges and center of wood or metal studs up to 1 1/2-Inches (38 mm) deep.
Easy-to-read LCD display, audio tone, and the patented SpotLite Pointing System indicate stud center.
WireWarning detection indicates the presence of live, unshielded electrical wiring up to 2" deep.

150A Common BusBar with 10 screws and a cover (part number 2300).
Max voltage: 300V AC/ 48V DC, Continuous Rating: 130A AC/ 150A DC.
Terminal Screws: 10 x #8-32, Terminal Studs: 2 x 1/4"-20.
Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity and corrision resistance.

600A PowerBar with four 3/8" terminal studs.
Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity.

Two stud scan modes to find wood or metal studs or joists up to 1- 1/2-Inch (38 mm) deep.
Metal scan mode to locate metal pipes or rebar.
WireWarning detection indicates the presence of live, unshielded electrical wire up to 2-Inches (51 mm) deep.
ACT Auto Correcting Technology corrects common user errors automatically.

150A Common BusBar with 10 screws and a cover (part number 2300).
Max voltage: 300V AC/ 48V DC, Continuous Rating: 130A AC/ 150A DC.
Terminal Screws: 10 x #8-32, Terminal Studs: 2 x 1/4″-20.
Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity and corrision resistance.

...n quickly locate wood, metal and AC wires hidden in the walls or ceilings of the house to help you avoid potential serious issues when you install TVs, cabinets etc..
NEVER MISS A STUD & NEVER WORRY DRILLING INTO LIVE WIRES-This Povlen stud finder is designed to locate both wood and metal studs while avoiding AC electrical wires.This studs finder Indicates the live AC wire in all modes to keep you away from AC wires and avoid you from drilling into electrical wires. And Povlen stud finder is highly accurate for detecting a range of materials, even materials found in thicker walls..
EASY to USE and RELIABLE - Developing the reliable stud finder with laser level is our goal to help you avoid the detecting hazard. The two-button design is very easy to use. The button on the left is ON/OFF to open or close the wall finder, and the other on the right is scanning mode switch. With the help of this stud finder, you can quickly locate wood, metal and AC wires hidden in the walls or ceilings of the house to help you avoid potential serious issues when you install TVs, cabinets etc..

Locates the edges and center of wood or metal studs up to 1 1/2-Inches (38 mm) deep.
Easy-to-read LCD display, audio tone, and the patented SpotLite Pointing System indicate stud center.
WireWarning detection indicates the presence of live, unshielded electrical wiring up to 2″ deep.

Finds the center, edges, and direction of wood and metal studs up to 2 in. (50 mm) deep.
Thermally detects actively heated 1/2 in. diameter water-filled pex tubing up to 2 in. deep.
Find and map live unshielded electrical AC wiring up to 2 in. deep.
Backlit LCD screen and patented ergonomic pivot pinch grip for comfortable scanning and viewing from all angles.
Low battery indicator for optimum performance.

...4 stainless steel mounting screws and caps to help fix the switch tightly. Removable rear cover insulates the rear terminals against any short circuits. 4 Removable side plates provided access for battery cables.
【COMPATIBLE】This battery disconnect switch is used for DC 12 - 48V systems to isolate and secure the electrical system, can stand alone or be locked together with other switch, simple and economical way to separate batteries.
【NO MORE BATTERY DRAIN】This battery isolator switch provides a reliable way to shut down electrical power during maintenance and protect batteries from excessive drain when vehicle or boat is not in use.
【WIDE APPLICATION】This battery kill switch is widely used for Car, Marine, Boat, RV, Camper, Travel Trailer, Truck, ATV, UTV, Battery banks and other electrical equipment's switch, such as flashing light, chassis light, fog light, dome light.

Find ferrous and non-ferrous metal up to 6 in. (152 mm) deep in concrete and other non-metallic surfaces.
Automatically differentiates between magnetic metal (such as rebar) and non-magnetic metal (such as copper pipe).
Shows the depth of metal from the surface in both inches and centimeters.
Helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble.
Ideal for finding and/or avoiding rebar, cables, pipe, nails in reclaimed wood, nails/tacks in studs behind lath & plaster walls, electrical boxes and conduit, and more.