ReviewsElectro magnetic Chucks

Pair Rockville RV69.2C 6x9 Component Car Speakers 1000 Watts/220w RMS CEA Rated

Includes: (2) 6×9” speakers, (2) tweeters, (2) Crossovers, (2) Grills, Flush and surface Mounting accessories, Speaker wire..
Rockville RV69.2C 6×9 Component car speakers (pair). Peak Power Rating: 1000 Watts per Pair / 500 Watts Each. CEA Compliant RMS Rating: 220 Watts per Pair / 110 Watts Each. Injection Molded Polypropylene woofer cone gives amazing bass and mids..
1.2” PEI dome tweeter with ferrite magnet give amazing highs. Flush and surface mounting tweeter options. Fine-tuned 2-Way Crossover, 12db/Octave Roll Off. Ferro Fluid Cooled Tweeter Magnet. Steel high quality basket. Rubber magnet boot cover..
Frequency response: 30-22,000 Hz. Sensitivity: 91 dB @ 1w/1m. Mount depth: 3.35″. Impedance: 4 Ohm. Grilles included 1.2 Inch. Aluminum voice coils. 100% oxygen free copper voice coil windings. Black electro-plated T-yoke and washers..
Cotton spider material. Copper terminals. Cutout diameter: 8.58” x 5.83”. Magnet: 27 Oz Y25 magnet. Magnet dimensions: 120mm x 18mm. Fs: 60.735 hz. Re: 3.6 OHM. Qes: 1.638. Qts: 1.066. Qms: 3.05. Fits 6×9”..

Check Stock

12V Electromagnetic Lock 600LB Magnetic Door Locks for Double Door Mag Locks Magnetic Security Access Control System Electric Gate Lock Outdoor Holding Force 280KG

Double door locks 280kg electromagnetic lock 600lbs holding force 600lbs magnetic locks control system . Use for : security types: the power to open the door wooden door, glass door, metal door, fire door....
Maglock double door 600 lb locks pull force magnet double door locks, Use magnetic power to lock the double doors for magnet access control lock, Collinear Load Test 280kgx2 / 600lbx2 Dual Voltage 12 or 24 VDC(optional) The Standard Voltage is 12VDC when Finished..
12v magnetic lock double door 600 lb magnetic lock alluminum shell adopts magnetic door locks high strength materials with hard anodised processing.Corrosion resistant.Good quality and durable to use..
12v Electric magnetic double door lock 600lb control kit for electro magnetic locking system commercial double door electromagnetic lock for a double glass door, storefront door, bathroom, floor lock,Can be opened by push button, remote controller, etc..
Security door magnet 600lb double mag locks fit for wooden door, metal door, glass door, fireproof door, etc..

Check Stock

Pair Rockville RV68.2C 6x8 / 5x7 Component Car Speakers 900 Watts/170w RMS CEA

Includes: (2) 6x8” speakers, (2) tweeters, (2) Crossovers, (2) Grills, Flush and surface Mounting accessories, Speaker wire.
Rockville RV68.2C 6x8 and 5x7 Component car speakers Peak Power Rating: 900 Watts per Pair / 450 Watts Each.Injection Molded Polypropylene woofer cone gives amazing bass and mids. Flex Motion Butyl Rubber Surround..
1.2” PEI dome tweeter with ferrite magnet give amazing highs. Flush and surface mounting tweeter options. Fine-tuned 2-Way Crossover, 12db/Octave Roll Off. Ferro Fluid Cooled Tweeter Magnet. Steel high quality basket. Rubber magnet boot cover..
Frequency response: 32-22,000 Hz. Sensitivity: 91 dB @ 1w/1m. Mount depth: 2.52". Impedance: 4 Ohm. Grilles included. Aluminum voice coils. 100% oxygen free copper voice coil windings. Black electro-plated T-yoke and washers. Cotton spider material..
Copper terminals. Cutout diameter: 7.36” x 5.12”. Magnet: 13.5 Oz Y25 magnet. Magnet dimensions: 90mm x 15mm. Fs: 65.102 hz. Re: 3.6 OHM. Qes: 1.663. Qts: 1.173. Qms: 3.977. Fits 6x8” and 5x7” openings..

Check Stock

5PCS Strong Magnetic Extension Socket Drill Bit Holder,1/4" Hex Shank S2 Steel Magnetic,Screwdriver Extension,Quick-Change Hex Shank Set,Screwgun Bit Tip Holder

【Advanced material】:Strong Magnetic Extension Bit Holder is made of high-quality S2 Steel ,and the sleeve is made of high-quality alloy steel.Corrosion resistance,wear-resistant, high-strength, durable,hard..
【Strong magnetic】:The drill seat has permanent magnets to ensure a secure fit of the drill seat. With super magnetic, good adsorption, hold the drill bit and fasteners tightly, there is no trouble of dropping tools during the work..
【Precision design】:Designed for 1/4" hex shank bits.Great for working with hard to reach screws.Strong magnet holds bits securely, and the magnet is located inside the alloy steel tube.Must-have accessory set for power drills and impact drivers..
【Widely used】:Suitable for all kinds of quick-change chucks and hex tools, it is a good helper for daily tool use.To a large extent, it can meet the needs of daily work.Unlimited uses in automotive, hardware, hobby, home, etc..
【Package includes】:5PCS 1/4" Strong Magnetic Extension Bit Holder are stored in a box.This product has a warranty period of 30 days from the date of purchase.If you have any questions, you can contact me at any time, we provide returns and exchanges for free..

Check Stock

uxcell 1/4 Inch Hex Shank by 3 Inch & 4 Inch Magnetic Bit Holder Extension,Quick Release Screwdriver Drill Bit Power Tool,5pcs

【SPECS】Lengths 3" (75mm) and 4" (100mm) for superior access for hard-to-reach fasteners..
【1/4" HEX SHANK】Universal 1/4" quick-change hex shank fit all power drills, chucks and screwdrivers..
【MAGNETIC】With magnets to hold bits securely in place ensuring you that your bits stay in place and never wobble..
【CR-V STEEL】Hardened chrome vanadium steel construction with zinc plated for anti-rust, durability and shock-resistant..
【WIDE APPLICATION】Suitable for Electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended..

Check Stock

TOOLEAGUE Magnetic Nut Driver Set for Impact Drill Cr-V Steel 1/4\ Quick-Change Hex Shank 17 Piece Metric/SAE Screwdriver with Storage Bag

High Quality: The impact driver bit is made of Cr-V steel, which has higher shock resistance and hardness. The surface is blackened by manganese phosphate, which has the ability to resist wear, oxidation and corrosion..
STRONG MAGNETIC FORCE: The drill sockets powerful magnetizer design can strengthen the safety lock and hold of the drill bit during the application of nut and bolt fasteners. Each magnet is tightly installed, and the magnet is not allowed to fall..
POWER NUT DRIVER BITS: metric magnetic nut driver set, metric: 6mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm. SAE: 1/4″,11/32″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″,( 1pc of each), Each mounter size is clearly engraved on the side for easy identification.Also includes 3 Pcs drill extension rods..
QUICK-CHANGE: The nut setter master set is suitable for quick chucks and any drill or driver, electric screwdriver, socket wrench, pneumatic impact wrench, cordless electric drill, screw gun, etc..
PACKAGE CONTENT:The Nut Driver Socket with a storage bag, which is convenient for storage and carrying. It is widely used in household DIY, auto parts, woodworking, professional machine repair, etc..

Check Stock

5pc Exell A32PX 6V Alkaline Battery V32PXA A32PX PX32A TR164A EN164A

COMMONLY USED IN: cameras such as Yashicas (Electro 35GL, Electro GSN, Electro GTN, Electro AX, MG-1) and MORE.
FITS AND REPLACES: PX32, Mallory TR164, Eveready 164, E164, V164, National HM-4N, 4NR52, V164PX, 1404M V32PXA, A32PX, PX32A, TR164A, EN164A, PC164A, Mallory TR164R Yashica Electro AX Yashica Electro 35 number 443957 Eveready E164 Mallory PX32 Yashica Electro 35 Duracell PX32 Exell A32PX PX 32A Yashica Electra 35 Mallory PX32 Yashica Electro 35 V 164 PX V164PX V164.

Check Stock

DEWALT DW2024CR6 6pc Double-Ended Power Bits phillips/slotted

Built for maximum durability and long life with impact drivers..
DoubleLokTechnology ensures both ends of bit lock securely.
Precision tip geometry delivers superior fitment, reducing stripping and cam-out.
Power Groove designed for compatibility with IRWIN Impact Performance Series Magnetic Screw-Hold Attachment.
1/4" quick-change shank is designed to work with impact drivers, and reduces slipping in standard drill chucks.

Check Stock

Jet JDP-17MF Drill Press Owners Manual

LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
DNLK store carries a comprehensive selection of replacement parts for all types of bandsaws, including blades, guides, tires, bearings, pulleys, belts, motors, switches, and other components..

Check Stock

Irwin Tools IWAF3412516 Impact Performance Series Nut Setter, 5/16' x 12'

This nutsetter utilizes impact drivers for durability and long life.
Nutsetter has a lobular design to drive the fastener on the side for less stripping and longer life.
Rare Earth magnets provide a strong hold to grip fasteners securely.
A black oxide finish on the nutsetter provides corrosion-resistance to increase the life of the bit.
Quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks.

Check Stock

CS Unitec 3/4' Weldon Tap Holder for 1/4' Diameter Taps - Mag Drill Tap Collet - Fits Standard Weldon Chucks On Most Magnetic Drill Presses (TCM 1/4)

FAST TAPPING: Adapter for 1/4" diameter taps, fast changeout. Tap chuck collets available for holding up to 3/4" diameter taps..
NO SPECIAL TOOLING NEEDED: Collets fit standard tap shanks. Can be used with variable speed, reversible and other mag drills..
3/4" WELDON SHANK: Fits most mag drill chucks. Industry standard, 2 flat shank..
COMPACT: For easy transport, storage and use without impact on magnetic drill stroke..
HEAVY DUTY: High quality, long lasting, professional grade, Made In Germany. Recommended use with MAB 465 magnetic drill (ASIN B08QGSPFDD).

Check Stock