ReviewsElectrode Graphite Mould

Denso (4702) IK20TT Iridium TT Spark Plug, (Pack of 1)

  • Larger spark translates to more power and superior fuel economy.
  • 0.4 mm iridium center electrode, world’s smallest diameter that maximizes firing potential.
  • 0.7 mm needle tip ground electrode, promotes higher spark energy and less heat quenching.
  • DENSO patented 360 degree laser welding process, ensuring exceptional quality bond and structural strength with the iridium center electrode..
Check Stock

4 Pack Tray Silicone Molds

  • What you will receive: the package comes with 5 pieces of round coaster resin moulds, 5 pieces of square coaster resin moulds, 2 pieces of silicone coaster storage box mould in rectangle and round, sufficient quantities and proper combinations will satisfy your various DIY needs in daily life.
  • Quality material: these epoxy casting moulds are made of silicone material, they are lightweight, reliable and reusable, they can withstand temperature from minus 40 to 446 degrees Fahrenheit, you can use them for a long time, and they are non-toxic, safe and tasteless, easy to clean with warm soapy water.
  • Simple to use: our round and square resin moulds set has smooth interior, so they are easy to demould, you just need to put the required filler into the mould, wait a while until the resin is completely cured, and gently twist the mould to push it out without tearing easily, while maintaining the shape of the mould.
  • Size of products: the diameter of round craft resin coaster mould is approx. 9 cm/ 3.54 inches, the size of the square coaster silicone mould is approx. 9 x 9 cm/ 3.54 x 3.54 inches, the round coaster holder silicone mould measures about 4 x 10.5 cm/ 1.57 x 4.13 inches, and the size of rectangle coaster storage box silicone mould is approx. 4 x 7 x 1....
Check Stock

5 Pieces Maple Leaf Jewelry Resin Moulds Spice Silicone Mould and Lighter Protective Cover Epoxy Mould Set for DIY Crafts Resin Casting Candle Wax Soap Making Projects Supplies

  • What's included: the package contains 5 pieces resin casting moulds, including 1 piece maple leaf jewelry mould and 2 pieces (1 pair) spice grinder resin moulds and 2 pieces lighter protective cover resin moulds in two size, enough for you to apply and satisfy your various needs.
  • Nice material: these epoxy moulds are made of silicone, which are reliable and easy to release materials, and the mould is not easy to get deformed, washable, please pay attention to blending ratio when adjusting glue.
  • Dimension: the size of maple leaf jewelry mould is approx. 16 x 18 cm/ 6.3 x 7 inches, the diameter of spice grinder resin mould is approx. 6 cm/ 2.4 inches, the size of lighter protective cover resin mould is approx. 6.6 x 3.5 x 2.5 cm/ 2.6 x 1.4 x 0.98 inch and 5.2 x 3.5 x 2.5 cm/ 2 x 1.4 x 0.98 inch, proper sizes are simple for you to operate.
  • How to use: you just need to twist the silicone mould and release your items out of the mould after the resin is completely dry and solidified, no tearing while the mould maintains its shape, so convenient for your DIY crafts.
  • Design your styles: our epoxy casting moulds provide interesting DIY ways for you to make, you can add some dry flowers, sequins, powder or pigments of various colors into the resin mould, or add a ....
Check Stock

Whaline Christams Gingerbread House Baking Tray Silicone Molds for Desserts Chocolate Candy,Cookies 2 Pieces

  • PACKAGE INCLUDE - 2 pieces Christmas theme silicone molds, totally 16 mould pits. Enough quantity and patterns for festive use and daily use. Delicate....
  • 3D HOUSE DESIGN - 2 roof mould pieces and 4 wall mould pieces can used for house building and tree, gingerbread, bird animal mould can stand beside....
  • SAFE MATERIAL - Made of good-quality silicone, our molds are available in ovens, freezers, microwaves and dishwashers. Flexible, non-stick and easy....
  • SIZE - Silicone mould is measuring 28.3x 18.1 x 0.8cm .1inx 7.1in x 0.31in. Each mould pit is suitable for making a chocolate house. You can put the....
  • GREAT FESTIVE DECOR- Perfect for Christmas party, holiday family gathering and new year party. You make chocolate house decor for cake, bakery,....
Check Stock

3 Shapes Storage Box Resin Moulds with Lids Crown Resin Jar Mould Jewelry Jar Silicone Mould Jewelry Ring Box Epoxy Mould Storage Bottle Casting Moulds for DIY Container Soap Candle Trinket Making

  • Nice combination: the package comes with 3 shapes storage box resin moulds with lids, including 1 crown resin jar mould, 1 vintage stripe edge box resin mould, 1 mini jewelry box mould, different styles for you to choose, allow you have a interesting making time.
  • DIY as you want: you can DIY your own jar with different options like glitter powder, mica powder, liquid resin dye or dried flowers and so on, to make a nice home decor or a gift for your family and friend by your imagination.
  • Reliable quality: made of silicone material, smooth and washable, you can clean and store the jewelry jar silicone mould easily, saving you much time and energy.
  • Easy to release: our jewelry ring box epoxy mould is easy to operate, you just need to twist the mould and release your creation out of your mould after the resin is completely cured.
  • Your piece comes out easily, no sticking, no tearing while the mould maintains its shape.
  • Functional usages: ideal for making craft projects and jewellery DIY storage box, gift box, candy box, candlesticks, items containers, flower pot or other items, the finished crafts will also be beautiful decorations for your home, office, shop and other places.
Check Stock

4 Pieces Mushroom Shaped Silicone Mould Mushroom Cake Moulds Vegetable Fondant Candy Moulds for Chocolate Candy Ice Cube French Dessert Cake Decoration

  • Package includes: you will get 4 pieces funny shape silicone moulds in 3 different shapes.
  • The size of each mould is different, please refer to the picture for the specific size carefully before purchasing.
  • Reliable material: made of quality silicone material, these mushroom chocolate mould trays are durable, non-toxic, odorless, heat resistant and reusable, so you can rest assured to use them to make various kinds of food.
  • Mould trays are able to be applied in oven, microwave, dishwasher and fridge.
  • Smooth and non-stick: the surface of silicone mould is smooth, non-stick and flexible.
  • And the mushroom-shaped dessert will pop up by pressing the mould with your fingers, easy to demould and also convenient to clean with water.
  • Wide range of usages: these silicone moulds are suitable for baking mousse, cake, French dessert, chocolate, ice cube, candy, cheese cakes, fondant, chocolate, candy, cake decoration, soap, candle, wax and more.
  • Cute shape design: silicone chocolate mould is well designed as many mushroom shapes, cute and lifelike.
  • With this vivid 3D mould, your baking will be more fun and memorable, and desserts made with it will be loved by your friend and family.
Check Stock

Apera Instruments, LLC-AI1312 Apera Instruments 201T-S pH/Temp. Electrode, 8-pin Connector, The Replacement Electrode for Apera 400/400S Series Portable Meters

  • 1.Glassy carbon, or glassy carbon, is a kind of amorphous carbon, which is made by slowly heating polyacrylonitrile resin or phenolic resin to a high temperature (up to 1800 ℃) in an inert atmosphere. It is suitable to be used as an electronic conductor material for electrodes and is also widely used in table tennis.
  • 2.The advantages of glassy carbon electrode are good conductivity, high chemical stability, low coefficient of thermal expansion, hard texture, good air tightness, wide application range of potential (from - 1 to 1V, relative to saturated calomel electrode). It can be made into cylindrical, disc and other electrode shapes. It can also be used as the matrix to make mercury film glassy carbon electrode and chemically modified electrode.
  • 3.Glassy carbon electrode is one of the widely used working electrodes. It is a good inert electrode with good conductivity, high hardness, high finish, high hydrogen overpotential, wide polarization range and chemical stability. It can be used as inert electrode for anodic stripping, voltammetric determination of cathode and variable valence ions, and can also be used as chemically modified electrode.
  • 4.The glassy carbon surface must be mirror and clean. Since the surface of glassy carbon is easily polluted....
Check Stock

Body Machine,Skin Care Anti Aging Device Facial Massager,Bọdy Ṣhạping Device ẸMṢ Tool

  • ❤ Advanced controller with micro-computer system and digital display.Five different pulse waveforms provide 5 kind of massage intensity, auto....
  • ❤ Ten pairs of silicon gel electrode pads with ultra strong ELECTRICAL CONDUCTIVITY and INFRARED. Ten groups of electrode pulse outputs，....
  • ❤ Attaching the electrode pads by elastic bandages, without shedding.Can use on Neck and Shoulder,Arms, Breast, Belly, Back, Hips, Legs, etc. Good....
  • ❤ Tightening and relaxing muscle to make it do aerobic exercise in order to decompose and consume fat and redundant energy inside body,prevent the....
Check Stock

Oumefar Welding Electrode Clamp, 400 Amp Twist Type Holder Welding Electrode Rod Holder Welding Electrode Twist Type Full Copper (Black)

  • COMPACT DESIGN ---- Welding electrode holders have strict quality control and quality assurance, compact design, small size, and the handle conforms to ergonomic design, and the work experience is more labor-saving..
  • FAST AND CONVENIENT ---- Type Holder Welding Tool has excellent workmanship and practicality, 400~500A universal, welding electrode clamp is more convenient to choose welding rod, which will help you to weld materials quickly and conveniently..
  • USED FOR ---- The welding Twist Type Full Copper holder adopts advanced technology and exquisite craftsmanship, and welding electrode clamp is not hot for long-term welding. Welding electrode clamp is used as a welding electrode holder for various rod electrodes..
  • WELDING ELECTRODE CLAMP ---- Type Holder Welding Tool have 1 x electrode holder, 1 x hex wrench, 1 x spacer and 1 x spacer post in the package. You can choose from black and yellow to meet your needs..
  • SERVICE ---- We launch products that meet your needs, and you will get our 100% problem-free guarantee. Customer's smile is our first goal,if you have any question,....
Check Stock

Silicone Mold Gnome Mold 3D Gnome Mold Epoxy Dwarf Plaster Mold for Soap DIY Paint Your Own Gnome Resin Making Wax Ceramic Polymer Clay 1

  • Package contents: you will receive 1 piece of pink gnome mould in pink color.
  • The size of the mould is about 10 cm/ 3.94 inches in height, 4.5 cm/....
  • Serviceable material: our gnome silicone mould is made of quality silicone, which is reliable, not easy to deform, tear and break, and can keep for a....
  • Easy to apply: you only need to put the resins or other materials into the Christmas silicone mould and wait for them to solidify.
  • Match with your DIY crafts: you can use the silicone mould to make a variety of dwarfs and print different patterns or letters on them, making....
  • Wide applications: this dwarf silicone mould can be compatible with different resins, concrete, perfumed soaps and other materials.
Check Stock

iStim Super Soft 2'x2' TENS Unit Electrodes for TENS Massage EMS - 100% Japanese Gel (2'x4' - 16 Pieces)

  • iStim ELECTRODE PAD: Use high-grade, and biocompatible SEKISUI Japanese gel, which facilitates efficient conducting of the electrical stimulator’s current to the patient’s skin in a dispersed manner. With spunlace non-woven cloth, it enhances the softness of the electrode and makes it be highly stretchable and flexible. Thus, iStim Electrode pads can be stuck to any parts of the skin tightly. Carbon Film and Carbon Fiber Wire provide great conductive surface to stabilize electrical conduction.
  • JAPANESE GEL: Japanese Sekisui Gel pads can be used up to 15 times if properly used. 100% SEKISUI Gel is the harmless ingredients and the best fit for even sensitive skin users. Highly Recommend: Use iStim premium quality electrodes with iStim TENS/EMS unit, making your every pain relief treatment more effective with perfect experience. [NOTE: DO NOT USE Extra Electrode Gel].
  • UNIVERSAL COMPATIBILITY: iStim electrode pads use standard 2mm pigtail connectors which is wide compatible with most mainstream TENS units, EMS massagers and muscle stimulators. iStim adhesive electrode pads are the best replacement accessories for your TENS/EMS device..
  • APPROVAL: OTC approved, no prescription needed. Pass SGS biocompatibility test, RoHS and LATEX-FREE test. Made in Taiwa....
Check Stock