ReviewsElectromagnetic Brake Kit

2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS

Brand New Suspension & 12" Wilwood Brake Kit For 1955-1957 Chevys with 2" Drop Spindles (Part # GMB5557X-K72). This specific set features 2" drop spindles, Rotors, and Red Dynalite 4 piston front calipers & Red Dynalite 4 piston rear calipers. Fits: 1955-1957 Chevrolet Bel Air, Delray, 150, & 210. Excludes All Station Wagons, Sedan Deliveries, and Nomads due to their Bowtie shaped gas tank that requires a centered housing rear end, as opposed to a centered pinion rear end..
Includes: *Currie 9-Plus Notch-Back rear end with 31 spline axles (#CE-GMB5557X): Currie crate rear ends are designed to be a bolt-in upgrade. Built to the stock 60” width & pinion specs. Heavy-duty 2" wide leaf spring pads are installed in the stock location for easy bolt-in installation *Southwest Speed 9" Ford Rear End Third Member With Posi Trac-Loc (#603-2078): This kit comes with a 3.70 ratio gear, which is a good cruising ratio. We have ratios from 3.50 to 5.00 that can be substituted in.
*Southwest Speed 2" Drop Spindles (SWS Part # 103-9760): SWS drop spindles provide a full 2" drop, while not changing the vehicle's steering geome....

Check Stock

G2 High Temperature Brake Caliper Paint System Set Yellow G2161

HEAT AND WEAR RESISTANT - G2 brake caliper epoxy paints are able to resist heat up to 980 degrees! Our epoxy paint system creates an extremely tough,....
EXTREME DURABILITY - G2 epoxy brake caliper paint system offers great chemical and physical protection against brake fluids, road salt, dust, dirt,....
HIGH GLOSS FINISH - This professional paint kit adds a great stylish touch to any brake caliper. This brush on system has advantages over spray- type....
12 STANDARD COLORS - G2 brake epoxy paint kit comes in 12 different high gloss, heat resistant colors including red, yellow, silver, blue, purple,....
100% MADE IN USA - Our Paint Kits are made and manufactured in the USA. Each complete kit covers 4 disc brake calipers or 2 drums and contains an....

Check Stock

LEAPGOMAX Club Car Brake Shoes and Spring Kit for DS G&E 1995-up (Automatic Adjust)& Precedent 1018232-01 Golf Cart Replacement Brake Shoe Pads (2 Short & 2 Long)

⛳Include 4Pcs Club Car Brake Shoes and 2 sets Spring Kit For a Golf Carts Equipped With Automatic Adjusting Brakes.(2 Short&2 Long)..
⛳Club Car Brake assembly Fits Club Car Golf Carts DS G&E 1995-up,Precedent Golf Carts Models. Brake Shoes OEM Reference Model:Club Car OEM: 1018232-01..
⛳Club Car DS Precedent Brake Shoes Spring Kit OEM #S 1018163-01,1011466,After Market #S 4324, 4333, 5162, 5219..
⛳Kit Contains 4 Brake Shoes Club Car (2 short, 2 long) and 2 set club car brake spring kit, For a Complete Cart..
⛳Package: 2 Kits Required Per Cart. Easy Installation & 1 Year Warranty..

Check Stock

R1 Concepts Front Rear Brakes and Rotors Kit |Front Rear Brake Pads| Brake Rotors and Pads| Ceramic Brake Pads and Rotors |Hardware Kit - CEB.51032.02

All-in-One Complete Brake Kit Replacement: eLine Series Front & Rear Brake Kit comes with (4) high performance brake rotors, (8) low-dust ceramic brake pads, and disc brake hardware kits..
OEM Specifications: Formulated with G3000/G11H18 cast iron specification, these premium brake rotors are engineered to match OEM specifications for durability, reliability, and stability..
Non-Directional Finish - Each rotor is prepared with a non-directional finish to promote a faster and more even disc brake pad bed-in, along with quieter and smoother stops for longer lasting, consistent braking performance..
Low Dust & Noise: Brake pads come with shims and hardware to eliminate noise. Low dust, asbestos free special ceramic formulation provides excellent fade resistance. Top choice for front and rear brake pads replacement..
Hardware Kit Included: Often overlooked during a brake repair, the disc brake hardware can be stressed, fatigued, or corroded within 1-2 years, which leads to a reduction in spring tension, excessive caliper movement, premature/uneven wear, and noise..

Check Stock

BJTDLLX Complete Rear Axle Kit with Brake Assembly & Pillow Blocks for DIY Go Kart ATV Quad Buggy Mini Bike (No Chain)

【Material】The rear brake assembly kit of the kart is a high-performance aluminum cylinder with pre-installed brake fluid.
the brake disc is made of high-quality steel, which is durable and has a long service life..
【Rear Axle Kit】length is 740 mm/29 inches, disc size is 160 mm x 4 mm/6.3 inches x 0.16 inches, T8F 58T sprocket (without chain). This is a complete rear axle kit for karts..
【Rear Brake Caliper Assembly】with master cylinder and caliper, 61 inches/1550 mm brake hose length. This rear brake assembly should fit most pit bikes made in China..
【Wide Range of Applications】very suitable for DIY karting projects or reconstruction. Suitable for four-wheel ATV off-road karts. Suitable for many 50cc 70cc 90cc atv quad bikes, karts, such as atomik, motowork, DHZ, LEI, etc..
【Package Content】rear axle kit + brake assembly + a pair of pillows (without chain). (Package size: 30'' x 8'' x 3'', shipping weight: 12lb)..

Check Stock

Mophorn GO-KART Brake Master Cylinder Kit for 150cc Go Kart Hydraulic Brake Kit Universal Go Karts Brake Kit Kandi Complete Including Master Cylinder, Hose, Caliper, Pad for 150cc

High Adaptability: This go-kart hydraulic brake kit is compatible with Hammerhead and Trailmaster karts and other 150cc go-karts. It provides superior performance demanded by off-road enthusiasts..
Promised Braking & Cooling: This hydraulic brake kit features heavy-duty stopping power for everyday drivability. Drilled & slotted rotors improve heat dissipation during extreme conditions..
Quality Material: The master cylinder of this go-kart brake kit is made of high-performance aluminum, preloaded with DOT3 brake fluid. The brake discs are constructed from high-quality steel, durable and lasting for daily use..
Complete Accessories: The go-kart hydraulic brake assembly includes a master cylinder, three brake calipers, three brake hoses, and brand-new brake discs. It comes ready to install, pressurized with brake fluid. Do not worry about bleeding the brakes..
Key Parameters: Bolt Spacing of Master Cylinder Brake Pedal: 0.787" / 20 mm.
Master Cylinder Mounting Hole: 2.36" / 60 mm center to center. Three rubber brake hoses: 34" / 860 mm, 43" / 1090 mm, 75" / 1900 mm..

Check Stock

OEMTOOLS 27311 Power Steering and Brake Bleed Adapter Kit Works w/Hand Vacuum Bleeder Brake Line Bleeder Kit w/ 2 Rubber Power-Steering Adapters

POWER STEERING BLEEDER: Power steering adapter kit works on most vehicles.
Meant to be used with a hand vacuum brake bleeder.
ACCESSIBLE BRAKE BLEEDER KIT: Not just a power steering bleeder.
Select one of 3 different sized brake bleed adapters for your caliper, hook up the....
REMOVE AIR FROM LINES: Remove trapped air with this power steering and brake bleeder adapter kit.
Check that your vehicle’s power steering reservoir....
HAND VACUUM PUMP READY: Couple the power steering fluid tool and brake system bleeding tools with a hand vacuum pump to effectively bleed air without....
DURABLE TIGHT FITTING COMPONENTS: This power steering vacuum adapter kit comes with 2 EPDM tapered rubber adapters and 3 rubber brake bleeder....

Check Stock

TEKTRO M530 Linear Pull Brake, Black

Application: bike brakes kit,suitable for Children most bicycles,Height of break pad adjustable 20mm；See Figure 2 for detailed dimensions..
Material: The bike brakes kit is made of high-quality aluminum alloy, and the brake cable is also made of high-quality aluminum alloy. It is durable and can be used for a long time. It is resistant to cold, heat and oxidation, and is not easily deformed. It ensures that the brakes are sensitive and suitable for most weather conditions..
Product size: Front brake cable length: 55cm/21.65".
Rear brake cable length: 155cm/61.02".and the bicycle brake handle is suitable for handlebars with a diameter of 2.2 cm / 0.87"..
Easy to install: Quickly replace the old bicycle brake and tighten it with the corresponding brake fixing hole.
pass the brake wire through the brake wire tube in turn to fix the position of the metal wire tube.
then fix it on the bolt, install the brake pads, and adjust the distance of the brake wire , Position and length, and then fix the brake cable..
You will get: 2 pieces bike C shape brake, 1 pair aluminum bicycle brake lever brake housing, 1 pair cable brakes V type replacement set.

Check Stock

OEMTOOLS 25036 Bleed-O-Matic One-Man Brake Bleeder Kit, Featuring An Opaque Brake Bleed Bottle w/ Transparent Hoses and Tapered Fittings, No Mess Brake Fluid Bleeding (Packaging May Vary)

RELIABLE BRAKE BLEEDING TOOL: Our brake fluid bleeder kit features a reliable magnet for one-man operation.
Designed for use on calipers, wheel cylinders, and master cylinders to give you the most effective brake line bleeder kit for your budget.
NO MESS BRAKE BLEED: Get a tight fit over calipers with our tapered fittings and transparent brake bleeder hose of our brakes bleeder.
The transparent brake bleeder tubing ensures that you’ll know when the brake line is running clear and air-free.
ONE MAN OPERATION: No need to use the two-person method for your brake bleed.
Attach the one person bleeder's reservoir to the rotor or similar metallic vehicle surface with the strong magnetic attachment and pump the brake.
DURABLE BRAKES BLEEDING KIT: The quality construction of our 2 piece design gives you a durable no-mess operation.
Bleed brakes while keeping everything clean of caustic brake fluid.
Our handy reservoir makes disposal of brake fluid quick and easy.
FITS MOST VEHICLES: Our specially tapered fittings work on most vehicles.
The hoses hold firmly to the durable brake bleeder bottle and tapered fittings to create a no-mess operation that keeps your components clean of brake fluid.

Check Stock

CLUBRALLY Brake Shoes Spring Kit Fits Club Car 1995-up DS and Precedent Golf Cart 1018232-01 1018163-01

★CLUB CAR BRAKE SHOES SPRING KIT FITS 1995 UP DS & PRECEDENT CLUB CAR GAS OR ELECTRIC GOLF CARTS..
★BRAKE SHOES INCLUDES:Golf Cart Brake Shoes Set(2 Short-17T, 2 Long-17L).
★12 PCS BRAKE SHOES SPRING KIT INCLUDES:(4) BRAKE SHOE CLAMP SPRINGS,(4) BRAKE SHOE HOLD DOWN PINS.(2) BOTTOM BRAKE SHOE SPRING,(2)TOP BRAKE SHOE SPRING..
★CLUB CAR OEM #1018163-01,1011466 1018232-01,AFTER MARKET #S 4324, 4333, 5162, 5219..
★Complete for one golf cart. Easy Installation & 1 year Warranty..

Check Stock

OMT 2-in-1 Brake Tool Kit Drum Brake Tool Kit and Brake Caliper Compression Tool Drum Brake Tool for Drum Brake Repair and Adjustment Brake Caliper Wind Back Tool for Brake Pad Replacement Reset

DUAL BRAKE TOOL SET: This 30-piece brake kit from Orion Motor Tech includes all the necessary parts for adjustment, removal, and installation of dual brake vehicles. The 8 drum brake tools include a remover, installer, compressor, retainer, pliers, and standard, angled, and mini adjustment spoons. The 22 disc brake tools include 2 retaining plates, left and right thrust bolt assemblies, and 18 adapters..
NEAR UNIVERSAL COMPATIBILITY: this drum brake tool kit and caliper wind back tool kit covers hundreds of makes and models of cars and light trucks, whether import or domestic..
EASY OPERATION: Both the drum brake tool and disc brake caliper tool set offer reinforced ergonomic handles to save you time and spare you effort and aggravation during use. Everything is clearly labeled in the custom blow-molded carrying cases and included instructions..
PREMIUM MATERIAL: Each part is made of structural-grade steel for good ductility combined with outstanding strength, durability, and longevity. Black oxide and chrome coatings ensure superior long-lasting wear and corrosion resistance..
SATISFACTION GUARANTEED: Orion Motor Tech backs these brake drum tool kit and brake caliper wind back tool with our usual strong warranty and friendly 24/7 customer service, ensur....

Check Stock