ReviewsElectronic Angle Gauge

75x25x36 AP30 Stainless Steel Angle Gauge Precision Micro Block Milling Adjustable Angle V Block Milling

  • 【PREMIUM STAINLESS STEEL】Our angle v block milling is made of high-quality stainless steel. This angle gauge has the advantages of surface hardening and durability.
  • 【NICKEL PLATED WORKING FACE】We carry out nickel plating treatment on the working surface of each degree angle plate angle, and the parallelism and perpendicularity of the rust removal of this adjustable angle v block are finely ground to 0.01mm.
  • 【FIXED ANGLE PROCESSING】This precision gauge can use the cursor to indicate the stepless tilt adjustment angle, and then fix it with screws to make various fixed angle processing and inspection workpieces.
  • 【ANGLE V BLOCK】The corner V-shaped block has the characteristics of high precision and easy operation. This micro v block milling can meet your various work needs.
  • 【WIDELY USED】This high precision angle gauge uses adjustable angle grinders and adjustable blades on milling machines, planers, and drilling machines. After the workpiece is processed, this stainless steel block milling crosses or clamps the workpiece with other fixtures, such as processing inclined planes, inclined hole drilling, etc.
Check Stock

Baseline 12-0475 Electronic Pinch Gauge

  • The Baseline Electronic Pinch Gauge performs tip, key, and palmar tests.
  • Strength readings are displayed on an easy-to-read LCD screen.
  • Record readings in lbs or kgs with a maximum capacity of 50lbs (23kg).
  • The Electronic Pinch Gauge can store up to 99 readings.
  • use the toggle buttons to review previous readings.
Check Stock

Miter gauge,Table saw miter gauge,Table saw fence system,Miter gauge table saw accessories,With clamping device,Precision Miter Gauge,For table saw 5/8 slot with miter gauge fence

  • ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock

Klein Tools 935DAG Digital Electronic Level and Angle Gauge, Measures 0-90 and 0-180 Degree Ranges, Measures and Sets Angles & 935AB1V ACCU-BEND Level, 1 Vial

  • 1 of Klein Tools 935DAG Digital Electronic Level and Angle Gauge, Measures 0 - 90 and 0 - 180 Degree Ranges, Measures and Sets Angles.
  • 1 of Klein Tools 935AB1V ACCU-BEND Level, 1 Vial.
Check Stock

Klein Tools 935DAG Digital Electronic Level and Angle Gauge & 70550 Hex Key Set, 11 SAE Sizes, Heavy Duty Folding Allen Wrench Tool with Extra Long Hex Keys

  • 1 of Klein Tools 935DAG Digital Electronic Level and Angle Gauge, Measures 0 - 90 and 0 - 180 Degree Ranges, Measures and Sets Angles.
  • 1 of Klein Tools 70550 Hex Key Set, 11 SAE Sizes, Heavy Duty Folding Allen Wrench Tool with Extra Long Hex Keys.
Check Stock

INNOMAX Thermal Guardian Quantum Solid State Waterbed Heater, Low Watt

  • State-of-the-art Ultra sensitive electronic control that holds the temperature to 1/8 degree of set point ensures accurate temperature sensing.
  • Certified to the standards of the Underwriter's Laboratories (UL) #1445 for Waterbed Heaters.
  • Low Watt Solid State Waterbed Heater For Softside Fluid Support Sleep Systems with a Minimum 3” Fill water chamber or tubes.
  • Thicker 32-gauge nickel/copper flexible circuitry design with 18-gauge power cord.
  • EMF Reduced Circuitry Design Comprehensive 5 year limited warranty.
  • Certified to the standards of the Underwriter's Laboratories (UL) No.1445 for Waterbed Heaters.
  • Low Watt Solid State Waterbed Heater For Softside Fluid Support Sleep Systems with a Minimum 3" Fill water chamber or tubes.
Check Stock

Hifonics ZG-1800.1D ZEUS Gamma 1800w Car Audio Class D Mono Amplifier+Amp Kit

  • ...A Inputs: Nickel plated high temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant, High Level Inputs: Easily tie into OEM audio systems that do not offer RCA output to maximize after market amplifier power, Operation Mode: Mono only.
  • Crossover Type: Onboard electronic crossover, Electronic Equalizer: Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers, Class/Topology: "Class D, High efficiency with big power in a small footprint, Output Device Technology: PWM MOSFET Power Supply, Stable power through the PC board with minimal heat generation, Heat Sink: Aluminum, Old School Hifonics Heat sink for Superior Heat Dissipation..
  • Power Supply: Simpatico Coil Design, The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices, Output Connections: RCA Outputs, Daisy chain multiple amplifier to eliminate additional signal cables from the source unit, Connection Type: Secure molded connection terminal for all Power, Ground and Speaker connections. Angled for ease of access while creating a clean wire mangement profile..
  • Features of RWK41: 1 - 17' High Grade Twisted Pair of 100% Copper RCA ....
Check Stock

DeWalt 5140032-78 Replacement Table Saw Miter Gauge

  • The purpose of a miter gauge is to allow user to position and safely guide the workpiece. This replacement miter gauge is simple to install, which minimizes downtime..
  • The miter gauge only fits DeWalt DWE 7490X Type 1, DWE 7490X Type 2, DWE 7491RS Type 1, DWE 7491RS Type 2, WE 7499GD Type 1, DWE 7499GD Type 2.
  • The miter bar swize is 22.5mm x 9.2mm x 300mm(W x H x L)..
  • There are lines for every one angle on miter gauge body, including larger lines at the five degree marks( 30, 45, 60, 75 and 90 ).This allows you to adjust the miter gauge to any angle you need..
Check Stock

Performance Tool W485 Pocket Precision Reference Cards Kit Set, 1 Pack

  • Card (1) Includes: AWG wire gauge, nail gauge, SAE and MET hole gauges, and pipe diameter gauge.
  • Card (2) Includes: SAE and MET rulers, angle gauge, radius gauge, circle compass, drafting shapes and curves.
  • Card (3) Front Includes: Angle formulas, geometric formulas, standard abbreviations, fraction to decimal equivalents, and wood measuring chart.
  • Card (3) Back Includes: Compass rose, electrical abbreviations, roman numerals, and conversion charts.
  • Conversion Charts Include: Speed, temperature, distance, time, power, weight, fluid, torque, area, and volume.
Check Stock

eOUTIL Digital Level Angle Finder Waterproof IP65 Protractor Angle Gauge Inclinometer with V-Groove Magnetic Base/0~360 Degree

  • ...l inclinometer bevel box. Moreover, you can have an accurate measurement of the angles between two measured surfaces.
  • Backlight LCD Display With Audio Indicator: Featuring a large, bright LCD display you can easily read the measurements whatever the light conditions. The display value reverses automatically when the electronic level is upside down. Acoustic signal routing via beeps when you reached 0° or 90°.
  • IP65 Waterproof And Dust-proof Level: It has IP65 protection which makes it suitable for use in harsh environmental conditions. The inclinometer battery cover and other high-sealing truction design make sure its good working in an environment with splashing water and dust.
Check Stock

Aproca Hard Storage Travel Case for Klein Tools 935DAG Digital Electronic Level and Angle Gauge

  • Eco-friendly Material: Made of High-density EVA and PU Material, premium Hard EVA to provide durability and a long-lasting performance..
  • Perfect Fit: Specially designed for Klein Tools 935DAG Digital Electronic Level and Angle Gauge..
  • Convenient Design: Comfortable hand grip for easy portability,Comes with specially mesh pocket for other accessories,Smooth but strong double zipper are easy for opening and closing, giving you a better using experience..
  • Great Protection: Stylish and Durable,prevents any damages or scratches caused by accidentally bumping,dropping, secures the device in good condition on travelling or outdoors..
  • For sale is case only(device and accessories are not included)..
Check Stock