ReviewsElectronic Ballasts

GE Lighting 74473 GE240RS-MV-N-DIY LFL ProLine Electronic Multi-Volt Program / Rapid Start Ballast for 2 or 1- F40 or F34T12

Mount length: (M) 8.9-Inch / Mount width: (X or F) 1.1-Inch / Mount slots: (MS) 0.3-Inch.
GE's ballasts are among the highest energy-efficient ballasts available.

Easiest Installation: Changing a plug and play fluorescent tube to an LED tube is simple and convenient. This Type A Fluorescent tube replacement is designed with an internal driver that allows the tube to operate directly from the existing linear fluorescent ballast...
Caution: Only compatible with select Electronic ballasts, The ballast in your fixture must be an approved electronic ballast. This lamp will not work with magnetic ballasts. It only takes a minute to remove the bulbs, and unscrew the plate to see the ballast name & model number. Simply write down the name & model number of the ballast in the fixture and reference the compatibility chart provided. If you have multiple fixtures, It’s important to check the ballast in each one of your fixtures.
Natural Daylight Color: With a very bright 5000 Kelvin Temperature, these led tubes are great for the kitchen, laundry, office or any place that requires very crisp and natural light..
5 Year Warranty.: The Warranty details can be found on the attached pictures.
1800 Lumens using only 16 watts - 5000 Kelvin Daylight - Medium Bi-Pin (G13) Base - 1 Inch Diameter/48 Inch length.

High lumen output: Great lumen output for high PAR values (1400μmol/s), initial lumen 70,000, color temp 10,000K.
Great for plant boosting: New improved horticulture lamps that use super high output technology to achieve maximum vegetative growth and flower yield. The 10k metal halide is the best spectrum used for vegetative growth to encourage shorter node spacing and bushier plants.
More efficiency: Features high blue spectral ratios for great photosynthesis efficiency and vegetative growth. New long-lasting life with a high lumen output and low energy consumption.
Special design: Specifically designed for high frequency electronic ballasts, frequency use with 1000w and compatible with 630w digital ballasts.
Notice: For horizontal burning only and do not handle with bare hands.

UPGRADE TO LED - Replace your 26 watt compact fluorescent PL bulbs with energy efficient 9 watt LED plug and play bulbs from Sunlite. They feature a 4-Pin base (G24Q) and are instant on at full brightness with no buzzing or flickering. Ideal for use in recessed lighting, lamps or any compatible fixture..
PLUG AND PLAY - These bulbs are direct replacements for PL fluorescent bulbs with no bypass required. For use with electronic ballasts only. See manufacturer's website for a complete list of compatible ballasts..
ENERGY EFFICIENT - These 9 watt LED bulbs are direct replacements for 26 watt CFL bulb. 950 Lumen output with a color temperature of 3500K (neutral white). Low annual operating costs of only $1.08. (Based on 3 Hours/Day at $0.11/kWh).
LONG LIFE SPAN - Provides up to 50,000 hours of energy efficient light means you'll have to replace difficult to access bulbs less often. Makes commercial and residential fixtures virtually maintenance-free..
A SAFER CHOICE - Unlike CFL bulbs these LED lamps contain no hazardous chemicals. They work with your existing ballasts so no special wiring or modifications are needed. They are DLC Listed for quality and efficiency..

【HIGH YIELD】: 1150μmol/s industry high, give 10% more PPF to the grow. Yield greater. 90000 lumens superior brightness performance..
【BIGGER BUDS】: At least 20%, up to 40% more PAR focus on RED to improve light utilization for photosynthesis designated for blooming bigger buds on flowering stage..
【Compatibility】⚙️: Compatible with electronic and magnetic ballast, E39 base.E-Ballasts with wide range of operating voltage (ballasts output voltage) 80V~280V are recommended..
【Long Life】⚡: Over 28,000 hours total life time, premium 90% output maintenance for 6000 hours efficient grow, quality guaranteed..
【Warm Up Time】☀️: Allow 5 mins for full bright.
Wait at least 7 mins before striking again after use..

The dimmer is small and easy to install,Switch Size: 32*20*35（mm）,Mounting Hole Diameter : φ7mm..
The connected power 0/1-10V interface must have a voltage of 10V for dimming.
The max load connected to the drive is 10V/40mA.
Minimum output connect cable size is 1007#20AWG.
Designed for 0-10V regulating and compatible all 0/1-10V interface dimmable electronic LED Driver & ballasts & transformers and power dimmers ..
Place the driver away from direct heat sources and in well-aired spaces .If the driver is built-in ,sufficient ventilation must be ensured..
When connecting the electronis LED Driver & ballasts & transformers and power dimmers ,careful attention should be paid to connecting "+" and "-" as the picture of Wiring Diagram .(Red line connects to "DIM+" ,Black line connects to "DIM-" ).

Xtrasun provides long-lasting and reliable operation.
These lamps are engineered specifically for use with both magnetic and electronic ballasts.
Consistently provides intense light in the correct spectral range.
Available in 7200 Degree Kelvin (Sky Blue) color temperature.