ReviewsElectronic Chasers

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
3 types of universal socket wrenchs cover various situations of oxygen sensor location.
6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.

Check Stock

Trail Chasers Ground Markers Pkg of 25 Blue 6 Inch Marking Whiskers with Lightweight, Non-Rust, Aluminum Stakes

You can make fast landscape studies using our Blue Trail Chaser flags. Also mark walking paths, yard boundaries, paintball grids, social distancing spacing, dressage areas and more.
Trail Chasers are a prime choice for marking potable water, drinking water, irrigation and slurry lines, irrigation heads, valves and drains.
Rugged, durable and highly visible ground markers for short or long term use.
Package includes everything you need to start using immediately. No extra trips to buy nails or stakes.
PRO TIP – Our lightweight stakes are great for carry, but sometimes the ground is harder than anticipated. Use a ¼” x 12 in. drill bit (carbide preferred) on a cordless drill to predrill a ground hole. This will make placement much easier.

Check Stock

DASBET 5pcs O2 Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set

3 types of universal socket wrenchs cover various situations of oxygen sensor location.
Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
M12×1.25MM & M18×1.5MM Threads Chaser: Oxygen sensor thread chaser tool are used for cleaning and re-threading damaged spark plug hole. Cleans damaged spark plug ports and threads. Rethreads damaged spark plugs, eliminates corrosion and straights damaged threads. Reduces the chance of cross threading..
This 5pcs oxygen sensor and threads chaser set is suitable for most contemporary vehicles. The oxygen sensor sockets fit on most cars and are ideal for the removal oxygen sensors..
Durable: Made from high performance chrome molybdenum and solid cast steel construction for strength and durability, finish with black oxide to prevent rust..

Check Stock

Aroma Stainless Steel Hot Pot, Silver (ASP-600), 5 quart

Timelessly Traditional – Our ASP-600 takes all the features of a traditional Shabu Shabu pot and translates them into a uniquely versatile piece that maintains the functionality of a traditional hot pot while combining it with the timeless appearance of stainless steel. Together, they form a brilliant hot pot that is sure to impress..
Dual Compartments – The dual-pot bowl allows for two different types of soup to be cooked simultaneously. Do you have a family of heat-chasers, but prefer a nice, mild soup? This is the perfect solution. The revolutionary design allows both to be heated without fear of one spilling into the other..
Features – The Aroma Stainless Steel Hot Pot features a removable pot for easy cleaning and storage, a tempered glass lid for adequate steaming, as well as cool touch handles for safe use with friends and family..
Accessories – The ASP-600 comes with adjustable heating base, dual-bowl cooking pot, and steam vent lid for perfect hotpot every time..
Stainless steel cooking pot with dual compartments.
1500 Watts, heats up fast and cooks evenly, power consumption :120 volt/60Hz.
Removable pot is dishwasher safe for easy clean up.

Check Stock

Apello Mole Repellent Pack of 4 Solar Powered Mole Repeller Vole Deterrent Gopher Repellent Ultrasonic Mole Chaser No Mole Trap Gopher Trap Harm to Your Lawn

The solar mole repeller sends out sonic pulses and vibrations every 30 seconds, which highly irritating to yards mole, gopher and vole those....
Audible sounds but no harm to pets and human. This gopher repellent repels pesky rodents in a humane way. No mole killer mole trap that work bloody,....
Mole chasers applies to rainy days, but it mustn’t be soaked in rain. Insert the stakes into the soil, and make sure the top part is about 2 inches....
Powered by a rechargeable solar cell, no need for extra batteries. An energy-saving and environment-friendly pest control repellent with non toxic and....
Each gopher repellent covers up to 6500, sq. ft (45 ft in radius). It's recommended to use multiple devices to overlap providing even more coverage.....

Check Stock

Delta Diamond Ripper Pro 4 1/2-Inch by .375' Concrete Crack Chaser Diamond Blade, Laser-Welded, V-Shaped Cut for Concrete Repair (4.5' X .375')

Ripper Crack Chasers deliver high cutting performance and long life at an affordable price..
They may be used wet or dry for cutting, routing and cleaning cracks in concrete. The cracks can then be filled with epoxy..
Use for cutting cured concrete, green concrete, masonry, stone and similar materials..
Specs are 4-1/2" X .375" cutting width X 7/8"-5/8" Arbor. Fits most hand-held grinders and saws..
This diamond blade is a top-quality product and has a lifetime warranty with free return shipping. If it ever breaks, warps, cracks or shows any indication of a material defect (being used for its intended purpose), or if the bond between the diamond segment and the steel core becomes separated at any time, it will be replaced free of charge!.

Check Stock

TOMMARS 49-Piece Thread Chaser Set, UNC UNF & Metric Thread Restorer Tool Master Thread Rethreading Kit

Thread chaser set includes: UNC(silver): 5/8”-11, 9/16”-12, 1/2”-13, 7/16”-14, 3/8”-16, 5/16”-18, 1/4”-20.
UNF(black): 5/8”-18, 9/16”-18, 1/2”-20, 7/16”-20, 3/8”-24, 5/16”-24, 1/4”-28.
Metric(gold): M14*1.5, M12*1.75, M12*1.5, M12*1.25, M11*1.5, M10*1.5, M10*1.25, M10*1.0, M8*1.25, M6*1.0.
Special thread repair kit used for chasing worn and damaged threads and cleaning stubborn dirt and corrosion without shaving off metal..
A must-have master thread chaser kit for any auto mechanic for chasing threads on rusty fasteners and bolt holes on cylinder heads, engine blocks, and bodies of vehicles..
Thread chaser set is made of the highest quality carbon steel materials, with strong strength and maximum durability. The dies and taps pieces are hex shaped to use with a wrench or socket..
This master thread chaser set is comes with a storage case to keep everything organized. The taps and dies are color coded for easy identification, which helps you differentiate at a glance between coarse, fine, metric, and SAE chasers and dies..

Check Stock

Apeixoto Oxygen Sensor Removers 5PCS Oxygen Sensor Sockets with Packing Case Oxygen Sensor Socket Set Removal Tool

Function: The Apeixoto oxygen sensor removers will help your in adjusting and removing oxygen sensors, oil pressure sending unit vacuum switches and fuel injections. These tools can be used most vehicles..
Package: The package includes 5pcs sockets and wrenches included in the red case.The whole tool set comes in a solid red case which will protect the tools well during shipping and let you keep the tools well after usage..
Specifications: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Material: The Apeixoto oxygen sensor removers and oil Pressure Sending Units are constructed with heat-treated chrome vanadium steel. It is totally rust and corrostion resistant. The surface has a black powder and it looks much more shinny..
Warranty: 100% satisfaction. If you come across any issue or need any assists during usage, we are here to help..

Check Stock

5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool

【Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
【USE】 Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
【Package】1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
【Material】 Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
【Service】100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..

Check Stock

5 PCS Automotive Oxygen Sensor Socket Wrench Removal Tool and Thread Chaser Set (Blue Case)

Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
Package1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads.
USE Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
Service100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..

Check Stock

QUAFFER Double Bubble Layered PLASTIC Shot Glass Plus Recipe Card – Clear Chaser Shot Glass Jigger for Smooth Tasty Shots – Fun Unique Split Shot Glasses Barware (Set of 12)

...ows you to serve bomb shots in style. Patented layered shape allows you to serve the shot and chaser in 1 glass, so the last thing you taste is the chaser. 2.25 oz on the bottom, 1.25 oz on top. No magic or witchcraft involved: just the simple laws of physics we all learned in school. Liquor is less dense than most chasers, so the liquids naturally want to separate..
FUN! & UNIQUE - One of a kind presentation & visual experience! Clear for visibility of contents and to coordinate with most tableware, drinkware, and decorations. Great for Bars, Restaurants, Catering Events, Night Clubs, and Bachelor or Bachelorette Parties!.
PREMIUM DURABLE PLASTIC - Crafted from premium quality & thick plastic, Quaffer glasses won’t break easily. Ideal for heavy duty use in bars, tailgating, restaurants and other commercial setups..
CONVERSATION STARTER – Be a bartending magician! Step up your party game and wow all your friends..
BEACH FRIENDLY – Perfect for locations where glass is not ideal or permitted, but you still want to Quaffer like a champion..

Check Stock