ReviewsElectronic Power Tool

Worx WX812L 20V Power Share Brushless 4-1/2\ Angle Grinder

  • [BRUSHLESS MOTOR] Delivers a longer runtime and more power, which means more efficiency. Plus, it significantly extends the life of the tool.
  • [ANTI-KICKBACK] Electronic technology shuts down the tool when a jam is detected.
  • [DO IT ALL WITH THE SAME BATTERY] Worx Power Share is compatible with all Worx 20v and 40v tools, outdoor power and lifestyle products.
  • [SLIM DESIGN] Easier to get into tight spaces, easier to transport and store. At only 4.5 lbs., anyone can use it.
  • [SECURE GRIP] Ergonomically designed handle gives you secure control and is comfortable to use for long stretches.
  • [AUXILIARY HANDLE] 2 positions so you can get leverage and find a grip that works for you.
  • [POWERFUL SPECS] 8500 rpm, 4 1/2" x 7/8" disc size, 5/8" x 11 UNC Spindle.
  • [WHAT’S IN THE BOX] 2.0 Ah 20V Battery, 5-Hour Charger, Auxiliary Handle, Metal Grinding Disc, and a Spanner Wrench.
Check Stock

Huepar Electronic Self-Leveling Rotary Laser Level Kit -360 Horizontal Laser Beam Interior/Exterior Rotating Laser Level Tool, Receiver, Protective Glasses, Alkaline Battery, Hard Case Kit RL200HR

  • ✔️WIDE APPLICATIONS: This rotary laser features electronic self-leveling, projecting 360 horizontal laser beam. You can use horizontally for install wainscoting, or leveling cabinets and more indoor & outdoor applications. This is a great laser tool for any job from DIY to large commercial construction, and everything in between..
  • ✔️ELECTRONIC SELF-LEVELING & VIBRATE MODE: Electronic Horizontal self leveling makes this rotary laser self level up to 5° within 10 seconds. Besides, slight movements can be ignored in windy or other vibrating conditions while turn on vibrate mode. Self-leveling or manual mode, choose whatever you want with our rotary laser level..
  • ✔️HIGH PRECISION & EXTENDED RANGE: Our rotary laser level projects bright red beam with accuracy of +/- 1/8″ at 100Ft. It provides precision needs for the contractors when doing jobs like alignment and height transfer. In addition, it is a great tool for large job-sites at a working range up to 1600Ft diameter using with our Receiver(included in the kit)..
  • ✔️DURABLE DESIGN: RL200HR rotary laser level adopts the finest industry materials and coated glass, which not only provides high quality of laser beam but also ensures the tool survive even after minor accide....
Check Stock

DEWALT Router, Variable Speed, Fixed Base, 2-1/4 HP (DW618K) , Yellow

  • 2-1/4 horsepower, 12-amp electronic variable-speed motor provides power to rout smoothly through toughest hardwoods.
  • Electronic variable speed with full feedback control for constant speed under load from 8,000-24,000 RPM.
  • Micro-fine depth adjustment ring provides precise depth adjustments in 1/64-inch increments and adjusts vertically.
  • Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking.
  • Quick release motor latches for fast and easy motor pack removal for bit and base changes.
Check Stock

ZKTOOL Car Memory Data Saver Automotive Emergency Power Supply Cable Battery Cable OBD II Memory Saver Connector Vehicle Clock Memory Saver Two 2 Alligator Clips and Cigarette Lighter Socket

  • [Function] Protect the memory when replacing the car battery, prevent the reset of the vehicle drop information, digital clock, stereo, notes, ABS and other settings. For connecting a 12V battery., red clip link back-up battery positive, negative black negative.Prevents electronic memory loss when disconnecting a vehicle's battery preserves vehicle codes and electronic presets..
  • [Danger of power failure] When the car battery is replaced when there is no backup power supply, not only various memories of the car can be lost, but also abnormal display conditions may occur. Also, restoration requires readjustment at the dealer. With this tool, you don't need to worry about this kind of problem..
  • 【Buzzer Alarm】The new version of the memory key sometimes reminds the alarm when the backup power supply is insufficient. The memory guardian can be operated in the cockpit, and the battery replacement operation needs to be operated in front of the car. Therefore, if the backup power is insufficient, the old LED indicator is difficult to detect, the new buzzer will sound an alarm and focus on the job..
  • 【Quality】This tool is made of new PVC material, environmentally friendly material, non-toxic and tasteless. Quality assurance, long service life. Adopt thick ....
Check Stock

DEWALT Angle Grinder, RAT Tail, 7-Inch, 13-Amp (DWE43840CN)

  • Brushless motor of the angle grinder requires no brush changes.
  • Brake stops wheel in 4 seconds or less on average using DW8826 wheel.
  • The electronic Kickback Brake of DEWALT angle grinder engages when a pinch, stall, or bind-up event is sensed, engaging with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut off the motor.
  • POWER-LOSS RESET - The ON/OFF trigger switch has a no-volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart tool..
  • LANYARD READY integrated lanyard attachment point (Lanyard not included).
  • 2-stage trigger requires two actions to activate tool.
Check Stock

Dorhea ESP8266 ESP-12 NodeMcu D1 Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board + Relay Shield + 2.54mm 40Pin Single Row Male Pin Header - 3Set

  • The esp8266 module is 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB connection.
  • WiFi internet development board 5V 1A switching power supply (switching power supply）onboard..
  • 5V relay shield is a digital switch to control much higher voltages and currents than esp8266 mini microcontroller, controlled by the D1 , the relay will switch to allow current to flow or turn off, depending on wiring..
  • 40 pin 0.1inch (2.54mm) male pin header connector PCB board pin strip electronic component, they are easy to be cut to any length if needed, you can cut or score with some electronic tool..
  • The pin header is an ideal connector for the PCB board and intergrated circuit, used widely in the computer and breadboard, compatible with raspberry pi or other electronic project..
Check Stock

DEWALT Angle Grinder, Paddle Switch, 5-Inch / 6-Inch, 13-Amp (DWE43244N)

  • Brushless motor of the angle grinder requires no brush changes.
  • Brake of the metal grinder stops wheel in 1 second or less on average using DWA8824 wheel.
  • The electronic Kickback Brake of DEWALT angle grinder engages when a pinch, stall, or bind-up event is sensed, engaging with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut off the motor.
  • POWER-LOSS RESET - The ON/OFF trigger switch has a no-volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart tool..
  • LANYARD READY integrated lanyard attachment point (Lanyard not included).
  • 2-stage trigger requires two actions to activate tool.
Check Stock

Bosch GDX18V-1800CB15 18V Brushless Impact

  • Versatile two-in-one impact driver and impact wrench design – features a versatile hex shank with power Groove and a socket drive.
  • Powerful EC Brushless motor – delivers a max of 1, 800 in.-Lbs. Of torque and up to 4, 200 IPM for professional power.
  • CORE18V battery – provides next-gen li-ion 21700 Cell technology in a lightweight, high-power battery with optimal performance.
  • Electronic cell and motor protection – helps protect the tool and battery from overloading conditions.
  • Half driver, half wrench – features a 1/4 in. Quick-change hex shank with power Groove and a 1/2 in. Square drive, for using either bits or sockets.
Check Stock

DEWALT Angle Grinder, RAT Tail, 5-Inch / 6-Inch, 13-Amp (DWE43265N)

  • Brushless motor of the angle grinder requires no brush changes.
  • Brake of the metal grinder stops wheel in 1 second or less on average using DWA8824 wheel.
  • The electronic Kickback Brake of DEWALT angle grinder engages when a pinch, stall, or bind-up event is sensed, engaging with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut off the motor.
  • POWER-LOSS RESET - The ON/OFF trigger switch has a no-volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart the tool.
  • LANYARD READY integrated lanyard attachment point (Lanyard not included).
  • 2-stage trigger requires two actions to activate tool.
Check Stock

DEWALT Grinder, Variable Speed, Paddle Switch, 5-Inch (DWE43214NVS)

  • Brushless motor of the angle grinder requires no brush changes.
  • DEWALT grinder's brake stops wheel in 2 seconds or less on average using DWA8914 wheel.
  • The electronic Kickback Brake engages when a pinch, stall, or bind-up event is sensed, engaging with maximum force to quickly stop the wheel, reduce the movement of the hand grinder, and shut the motor off.
  • POWER-LOSS RESET - The ON/OFF trigger switch has a no-volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart tool..
  • LANYARD READY integrated lanyard attachment point (Lanyard not included).
  • Variable speed functionality allows the user to adjust wheel speed for applications as needed.
  • 2-stage trigger requires two actions to activate tool.
Check Stock

BOSCH GDX18V-1800CN 18V Brushless Impact Baretool

  • Versatile two-in-one impact driver and impact wrench design – features a versatile hex shank with power Groove and a socket drive.
  • Powerful EC Brushless motor – delivers a max of 1, 800 in.-Lbs. Of torque and up to 4, 200 IPM for professional power.
  • Half driver, half wrench – features a 1/4 in. Quick-change hex shank with power Groove and a 1/2 in. Square drive, for using either bits or sockets.
  • Hammer-and-anvil system – designed for maximum impact energy.
  • Electronic cell and motor protection – helps protect the tool and battery from overloading conditions.
Check Stock