ReviewsElegoo Mars

6PCS FEP Film 200x140x0.15mm for ELEGOO Mars 2 Pro, Mars 3, Mars 3 Pro, ANYCUBIC Photon, Photon S, Photon Mono 4K, Phrozen Sonic Mini 4K, Creality Halot-one, LD-002H LCD Resin Printer Fep Replacement

Wide Application: Suitable for all desktop LCD 3D Printer that prints size no more than 200x140mm(L*W), such as ELEGOO Mars 2 Pro, Mars 3, Mars 3 Pro, ANYCUBIC Photon, Photon Mono SE, Photon S, Phrozen Sonic Mini 4K, Voxelab Proxima 6.0, Creality Halot one, Halot one Plus, Halot one Pro, LD-002R, LD-002H etc. Please note that this release film does not have a frame, so it is not suitable for the models that need to replace with the release film with a sealed frame..
High Purity FEP: Special FEP release film for 3D printing, using ultra-high purity FEP. Made of hot melt extruded cast film and has excellent non-stick, high-temperature resistance, electrical insulation, mechanical properties, wear resistance, and other characteristics. Size: 200x140mm.
High-Temperature Resistance: Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
High Transmittance: With over 95% light transmittance, this ultra-transparent film ensures the high stability of UV lightning..

Check Stock

KOYOFEI 3PCS Mono LCD Screen Tempered Glass Protective Film for 6.08‘’ Resin 3D Printer High Light Transmittance Protective Film for Elegoo Mars 2/Mars 2 Pro/Photon Mono 133x85.5x0.33mm

The light transmittance of the tempered film is 95%, which will not affect the light of the monochromatic screen to cure the resin in the resin tank....
With good protection, the tempered film can not only protect the monochrome screen from being scratched by sharp objects in daily use, but also....
Size: 133x85.5x0.33mm, perfect for 6.08-inch monochrome screens, compatible with ELEGOO Mars 2 , Mars 2 Pro, Photon Mono, Photon Mono SE and other....
Easy to use, the back of the tempered film is covered with a protective film. Please keep the screen clean before use, then remove the back protective....
Small Tips:The tempered film has a thickness of 0.33mm. In order to avoid printing problems, it is recommended to level the 3D printer again after....

Check Stock

6PCS Creality FEP Film Release Films 200 x 140 x 0.15mm for ELEGOO Mars/Mars 2 Pro/Mars 3/ANYCUBIC Photon/Photon Mono 4K/Phrozen Sonic Mini 4K/Creality Halot-one/LD-002R/LD-002H LCD SLA DLP 3D Printer

HIGH TRANSMITTANCE - The 3D release film, with high transmittance of over 95%, makes more perfect printing. Thickness: 0.15mm. Size information: 200 x 140mm. Package: 6 PCS Film..
WIDE COMPATIBILITY - Fit for ELEGOO Mars/Mars 2 Pro/Mars 3/ANYCUBIC Photon/Photon Mono 4K/Phrozen Sonic Mini/Phrozen Sonic Mini 4K/Halot-one/LD-002R/LD-002H/CL-60/Wanhao UV/MonopriceMini Deluxe/Nova3D/EPAX X1. Note: Not Fit for Halot one plus/Photon Mono S 3D Printer. Please confirm whether this FEP Film is compatible with your 3D Printer Before buying..
HIGH PURITY FEP - Special FEP release film, using ultra-high purity FEP resin. It is made from hot melt extruded cast film. It has excellent non-stick, high-temperature resistance, insulation, wear resistance, and other characteristics..
HIGH-TEMPERATURE RESISTANCE - Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
STABLE RELEASE FORCE - FEP melts at high temperature, passes through the extrusion equipment, and is poured into a similar plane to form with uniform thickness. Long-lasting durability, and stable release force. Strong ductility, excellent ductility, ductility up to 300%..

Check Stock

FULAMENT Fula-Flex Resin Sheet for 3D Printing - 150mm x 95mm - Flexible Stainless Steel Printer Build Plate

[ EASY TO INSTALL ] - Fulament’s resin build plate is very easy to install and use! Simply align the magnetic sticker, remove the paper backing from....
[ EASY TO REMOVE PRINTS ] - Keeping our customers’ needs in mind, we built a 3D printer build plate that increases printing success. Our 3D printing....
[ WHY FULAMENT ] - Unlike other resin flex plates who use spring steel, we use a spring tempered magnetic grade of Stainless Steel. Ensuring that the....
[ COMPATIBILITY ] - This 150mm x 95mm resin plate fits Elegoo Mars 3.
[ FULAMENT'S PROMISE ] - Fulament is a USA-based company. Our products are made by enthusiasts for enthusiasts. We know you'll love our 3D printer bed....

Check Stock

3D Printer Castable Resin Jewelry Liquid Casting/Wax Resin for LCD 3D Printer 1000 ml Casting Resin for All Different LCD 3D Printer

✅ Jewelry Sample Observation: Ultra precision & high-strength ensure models' detail clearly display, delicate and perfect. It suitable for....
✅ Lowest Shrinkage: Lower shrinkage and great stability significantly reduce printing time with its excellent fluidity, work excellent, which makes....
✅ Practical Material: Jewelry model printed by NOVA3D Wax Resin can directly act as pressure rubber model, thus you can get empty jewelry shape by....
✅ Better Adaptability: NOVA3D 405nm wax resin adapt to most LCD, DLP 3D printers, such as NOVA3D Elfin, Bene4, GEM, Anycubic photon, Elegoo Mars and....
✅ Quality Guarantee: We pride ourselves on providing caring service, both before and aftersales. Our support will respond to all inquires within 24....

Check Stock

ELEGOO Mini Purifier with Activated Carbon Filter and Universal Adaptor for LCD,DLP,MSLA Resin 3D Printer（Pack of 2)

Odor Control: Activated carbon can absorb and filter the irritant resin odor before they are ventilated throughout the cooling fan at a super adsorption rate, which gives you fresh and safe user experience..
Replaceable Carbon Filter: It comes with one activated carbon block which can be used for 3 to 6 months. The carbon can be replaced and need to be purchased separately..
Long Endurance：With the 2000mAh battery, it can work continuously for at least 24H once fully charged via the power adapter included..
Wide application：Not only for ELEGOO Mars Printer, it also can be used for LCD, DLP, MSLA Resin 3D Printer.
Well-Protected Package: Well-designed and sturdy box stuffed with all the parts, keeping it from damage during transportation..

Check Stock

ELEGOO Mars 4 DLP 3D Printer, Desktop Resin 3D Printer with Ultra-Quiet Printing, 20000+ Hours Service Life, and Ultra-Low Operating Power, Printing Size of 132.8x74.7x150mm³/5.22x2.94x5.9in³

[ ] ELEGOO MARS 4 DLP 3D printer adopts TI (Texas Instruments) DLP technology to project the 405nm beam directly and concentratedly onto the bottom of the resin tank with up to 95% light uniformity. Tempered glass replaces traditional LCD screens with up to 95% light transmittance, effectively reducing light diffusion and stray light interference..
[+ ] The service life of the DLP projector is as long as 20,000+ hours, 10 times longer than the 2,000 hours lifespan of an LCD screen, which means you will save a lot of maintenance costs for replacing your LCD printer's screen..
[ & - ] 12W ultra-low operating power is energy-saving and eco-friendly, with about 1/7 energy consumption of LCD printers. Since lower power consumption generates less heat, there is no need for a cooling fan to dissipate heat, reducing print noise below 48 dB..
[ ] The Z-axis linear rail is thickened from 15mm to 20mm, which effectively reduces the vibration amplitude during Z-axis movement and the layer pattern of printed models for better final print results. Sandblasted surface build plate with strong adhesion to improve the pri....

Check Stock

ELEGOO 2PCS Resin Tank with Lid, Metal Resin Vat for Mars 3 and Mars 3 Pro Resin 3D Printer with PFA Release Liner Pre-Installed

Original resin tank used for ELEGOO MARS 3 PRO resin 3D printer, and the PFA release liner is pre-installed..
Made of aluminum alloy, chemical corrosion resistance, not easy to deform, and durable for long-term usage, you don't need to worry about changing your resin vat frequently..
The metal resin vat with screws to fix it in place, and the feet on the bottom to keep the PFA release liner from making contact with your workbench..
Easy to assemble and replace with Allen wrench, and provide the extra lid to keep away dust, UV light source, or direct sunlight..
Perfect spare resin vat when you need for faster change resin color and a better printing experience..

Check Stock

KOYOFEI 2PCS 3D Printer Platform for Elegoo Mars 3 Building Plate and Magnetic Sheet Flexible Steel Plate Flex Bed for Elegoo Mars 3 3D Printer 150x95mm

Flexible and Magnetic Platform: The surface of the steel plate is machined by CNC drawing, which has good adsorption force to prevent the model from....
Robust and durable stainless steel material: The magnetic printing platform is made of high quality stainless steel material and has good elasticity.....
Size information: The size of the magnetic steel plate is 150 * 95mm, and the thickness of this platform is 3-4mm, compatible with ELEGOO Mars 3. Due....
Unique handle design: The magnetic printing platform is equipped with a handle that makes it easy to install and remove the magnetic printing....
Installation Tips: First clean your build plate very well, let it dry, connect your magnet to the plate, let it sit for a while so it is fully seated,....

Check Stock

5PCS FEP Film Release Film for ELEGOO Mars/ANYCUBIC Photon/Photon S/HALOT-ONE LCD SLA DLP 3D Printer, 200 x 140 x 0.15mm

【Compability】Suitable for all desktop LCD/SLA 3D Printer which print size no more than 200 x 140mm, such as ELEGOO Mars, AnyCubic Photon/Photon S, Creality LD-001..
Quantity: 5 pieces. Special FEP release film for 3D printing, using ultra-high purity FEP resin. It is made of hot melt extruded cast film. Has excellent non-stick, high temperature resistance, electrical insulation, mechanical properties, wear resistance and other characteristics..
【High Transmittance】With over 95% light transmittance, this ultra-transparent film ensures high stability of UV lightning..
【High Temperature Resistance】Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
【Excellent Ductility】Excellent elongation performance, ductility up to 300%, good flexibility, bending 10000 times..

Check Stock

5PCS FEP Film 200x140x0.15mm, Release Film for Elegoo Mars 2 Pro/AnyCubic Photon/Photon Mono/Creality LD001/All 5.5 inch UV Resin 3D Printer

【Compability】Suitable for all desktop LCD/SLA/UV 3D Printer which print size no more than 200 x 140mm, such as ELEGOO Mars 2 Pro/Anycubic Photon /Photon Mono/Creality LD-001..
Quantity: 5 pieces. Special FEP release film for 3D printing, using ultra-high purity FEP resin. It is made of hot melt extruded cast film. Has excellent non-stick, high temperature resistance, electrical insulation, mechanical properties, wear resistance and other characteristics..
【High Transmittance】With over 95% light transmittance, this ultra-transparent film ensures high stability of UV lightning..
【High Temperature Resistance】Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
【Easy to Installation】 Easy to install, there are simple and easy-to-understand tutorials on the package to guide you to replace the FEP film..

Check Stock