ReviewsElm 327 1 3

FORScan OBD2 Adapter USB ELM327 Scanner Compatible with Ford F150 F250, Automatic (MS/HS) CAN Switching OBDII Diagnostic Scan Tool for Ford Lincoln Mazda Mercury

  • 2022 UPDATe VERSION: Refined for many years, update to “No Switch” version. This new ELM327 FORScan OBD2 adapter can transform medium/high speed (MS/HS) CAN automatically, no manual switch needed. Up to 20 times faster than “toggle switch” adapters..
  • ELM327 OBD2 SCANNER: Pro-level check engine light programming. Supports all OBD2 protocols (J1850PWM,HS CAN, MS CAN, HS CAN2, HS CAN3), this scanner works as a normal OBDII / EOBD / CAN car code reader on most supported vehicles. ( Cars since 1996 ).
  • DESIGN FOR FORScan, ELMconfig, FoCCCus, FF2: Depending the scanning software you use, you can access the Global Window Mod, Bambi Mod, reverse tilt mirrors, tire size correction, Perpendicular Park, Secure Idle, 5 turn signal flash, heated steering wheel, disabled double horn honk, disabled door ajar chime and more. You can apply them to your vehicle..
  • FOR CAR MODEL: Compatible with Ford F150, F250, F350, F450, Ranger, S-Max, C-Max, Transit, Mondeo, Fusion, Kuga, Mustang, Explorer, Edge and other cars and light pickup Ford trucks— all from year 1996 and newer. Also works for Lincoln/Mercury/Mazda produced after 1996..
  • FRIENDLY TIPS: 1.ONLY for Windows2000/XP/Vista/7/8/8.1/10. 2.Download and install USB driver [CH340] and FORScan software from sw.f....
Check Stock

Vgate vLinker FD+ OBD2 Bluetooth Scan Tool, Diagnostic Code Reader for iOS, Android, and Windows - Made for FORScan

  • Recommended by FORScan for Android & iOS..
  • Support MS-CAN protocols – can access these proprietary Ford networks in addition to the 5 standard OBD-II protocols..
  • Works with FORScan, Carista, Torque, DashCommand, JScan, BimmerCode and dozens of other apps..
  • Over-voltage, over-current, over-temperature and battery drain protection, firmware updates. TP transmission protocol , Ensure wireless communication security..
  • Fully compatible with ELM’s AT command set (ELM327, ELM329) and STN’s ST command set..
Check Stock

OBDMONSTER ELM327 OBD2 Adapter Compatible with F150 F250 and More for FORScan MS/HS CAN Automatically Switch OBDII Diagnostic Scanner via USB for Windows only

  • DOES IT APPLY TO MY CAR? --- This ELM327 FORScan OBD2 adapter can compatible with all F150 F250 and more(Cars & F-series Trucks 12V), F150, F250,....
  • WHAT’S NEW? --- Update to "Auto" Version, 20 times faster than the "toggle switch" version. No manual switch needed, this OBD2 ELM327 adapter can....
  • WHAT CAN IT DO? --- With this FORScan adapter, programming is a breeze! This scanner can disable double horn honk, enabling mirror auto-fold, Bambi....
  • WHAT’S MORE? --- In addition to modifying hidden settings, it can also read fault codes & clear check engine lights, monitor different vehicle....
  • WHAT DO I NEED? --- Just three things --- this OBD-II scan tool, laptop running Microsoft Windows, software. Download and install USB driver and....
Check Stock

ertoory forscan obd2 Adapter, ELM327 forscan f150 for Ford forscan F250 with Hidden Features FORScan Configurator, F150 Programming Tutorial documentation and FORScan License Acquisition Tutorial

  • ELM327 FORScan OBD2 adapter is a vehicle code reader, ELM327 scanner, clear check engine light, FORScan Flash for Ford F150 F250 diagnostic programming scan tool, the adapter has the reliable advantage of USB cable connection and version 1.5 hardware to avoid data corruption and packet loss. MS-CAN HS-CAN switches operate at speeds up to 500 kbits per second.
  • Please install the USB driver & FORScan software before connecting the car, we will provide FORScan extension license and USB driver tutorial for easy use Compatible Software: FORScan, Supported Operating Systems: All Windows versions - XP, Vista, 7, 8, 10, 11.
  • Supports all OBD 2 protocols (HS-CAN, MS-CAN, HS-CAN2, HS-CAN3), the The scanner can be used as a Ford F150 Lincoln car OBD/EOBD/CAN barcode reader to program and unlock hidden features.
  • FORScan enables hidden features and disables existing features without visiting a dealer: including F150 Hybrid Fake Engine Noise, Backup Buzzer, Start-Stop/Discover Global Window Functions/Safe Idle/Vertical Parking/Trailer Brake Controller/Disable Dual Horn horn/disable door ajar chime/mirror/tire size correction and more. FORScan function is only for Ford, we provide you with Ford F150 FORScan programming electronic file.
Check Stock

aoonav v1.5 Bluetooth OBD2 Scanner Adapter, Wireless Diagnostic Code Reader OBD II Scan Tool Reset & Clear Check Car Engine Light, Compatible with Android & Windows, Support Torque App, NOT for iOS

  • This ELM327 bluetooth OBD2 scan tool support for the extensive third-part apps(such as OBD fusion、Torque pro、Car scanner,Dash command、OBD home and more)scan the QR code on the box,turn you Android phone into a profession engine scanner diagnostic.
  • [Bluetooth Scanner]: Bluetooth ELM327 is the newly developed wireless scan tool. Works with OBD2 / EOBD compliant cars and light trucks (year 1996 or newer in the US, including pickup trucks, hybrid and many electric vehicles.
  • [Functions]: Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database). Clear trouble codes and turn off the MIL ("Check Engine" light)..
  • [Display current sensor data, including]: Engine, RPM, Calculated Load Value, Coolant Temperature, Fuel System Status, Vehicle Speed, Short Term Fuel Trim, Long Term Fuel, Trim, Intake Manifold Pressure, Timing Advance, Intake Air, Temperature, Air Flow Rate, Absolute Throttle Position, Oxygen sensor, Voltages, Associated, Short term fuel trims, Fuel System status, Fuel, Pressure..
  • 【High Quality Guarantee】1 YEAR Manufacture Warranty Against Defects & TOP Service : Customer 100% satisfaction is paramount to us. 100% mone....
Check Stock

Vgate vLinker MC+ Bluetooth OBD2 Car Diagnostic Scan Tool for iPhone iOS, Android & Windows

  • ✔ Vgate vLinker MC+ Bluetooth OBD-II adapter supports SW-CAN & MS-CAN protocols – can access these proprietary GM & Ford networks in addition to the 5 standard OBD-II protocols..
  • ✔ Upgraded version of Vgate iCar Pro Bluetooth, specifically for coding APP that requires large amount of data transmission..
  • ✔ Fully compatible with ELM’s AT command set (ELM327, ELM329) and STN’s ST command set..
  • ✔ Unlike other OBD2 adapters, Vgate vLinker MC+ won’t drain your battery if you leave it plugged in. Operating Current is 24 mA, automatic sleep in idle state, sleep current is as low as 3mA..
  • ✔ This pocket-size Vgate vLinker MC+ OBD2 adapter won’t obstruct driver legroom and features unparalleled performance, intelligent sleep mode, hacker-proof security, exceptional third party app support..
Check Stock

vgate OBD2 Bluetooth Scanner vLinker FD Diagnostic Adapter for FORScan, Work with Android and Windows

  • Made for Android FORScan Lite and Windows FORScan. It is no longer a cloned chip solution and boost the speed by at least 200% for quicker and smoother diagnosis experience.
  • The software scanner supports all Ford, Mazda, Lincoln and Mercury vehicles (99% of models after 2000 and around 92% of models after 1996). Please note: New 2019+ Mazda 3 and CX-30 are not supported yet.
  • Works perfectly with most cars, SUVs, MPVs, mini vans and light trucks made in the USA in 1996 or later. [For the purpose of check engine light]..
  • No toggle switch is needed to access the OBD-II network. It supports all OBD-II standard networks, including KWP2000 (ISO 14230-4), SAE J1850, ISO 15765-4 and SAE J1939, Compatible with ELM327, ELM329 and STN instruction sets.
  • [Safe to leave plugged in] Operating current: 51 mA. Automatically turns into sleep mode when not in use. Sleep mode current: 3mA (min.) If you have any questions, please contact us for guarantee.
Check Stock

GODIAG J2534 & ELM327 OBD2 USB Adapter for HDS, TIS, ODIS, Compatible with J1979 Vehicles, Switch Mode Automatically, Diagnosis on Windows 8/10/11, 32/64bit

  • 【Softwares Compatible】Support most all of ELM327 software (PCMFLash.
  • ELMConfig, Forscan, ScanMaster...) and a part of J2534 compatible software (HDS, TIS, ODIS, JLR SDD). Switch mode automatically. Supply free software for diagnosing J1979 compatible vehicles..
  • 【How to Use】Download a suitable software(for example:FORScan), connect OBD2 USB adapter to your car, access your chosen J2534/ELM327-based software, and begin the vehicle diagnostics. Suitable for 99% of models after 1996 (the year when OBD2 became a standard in USA).
  • 【Multiple Functions】More comprehensive OBD detection with support for vehicle information, system status, fault codes, free frames, oxygen sensors, etc. FORScan Functions contains Discover Global Window Feature/Bambi Mod/Secure idle/Perpendicular Park/Trailer Brake Controller/Disabled Double Horn Honk/Disabled Door Ajar Chime/Reverse Tilt Mirrors/Tire Size Correction and many other features..
  • 【Faster Speeds & More Stability】ISO11898-2 high speed CAN (OBDII PIN 6 and PIN 14. Speed up to 1000Kbps). J1850 PWM (Support IFR and 2X speed mode), J1850 VPW (Support 4X speed mode). Never let you down while reprogramming..
  • 【Diagnosis on Windows 】Support Windows 8/10/11, 32/64bit. Please note: Win7 and WinXP can not r....
Check Stock

vgate vLinker FD Plus OBD2 Adapter Bluetooth BLE Scanner for FORScan, Work with iPhone, Android, and Windows

  • [Recommended by the FOScan team] Made for iOS, Android FORScan Lite and Windows FORScan. It is no longer a cloned chip solution and boost the speed by at least 200% for quicker and smoother diagnosis experience..
  • FORcan software scanner supports all Ford, Mazda, Lincoln and Mercury vehicles (99% of models after 2000 and around 92% of models after 1996). Please note: New 2019+ Mazda 3 and CX-30 are not supported yet..
  • Works perfectly with most cars, SUVs, MPVs, mini vans and light trucks made in the USA in 1996 or later. [For the purpose of check engine light].
  • No toggle switch is needed to access the OBD-II network. It supports all OBD-II standard networks, including KWP2000 (ISO 14230-4), SAE J1850, ISO 15765-4 and SAE J1939, Compatible with ELM327, ELM329 and STN instruction sets..
  • [Safe to leave plugged in] Operating current: 51 mA. Automatically turns into sleep mode when not in use. Sleep mode current: 3mA (min.) If you have any questions, please contact us for guarantee..
Check Stock

OBDTest

  • Connect your tablet plus an ELM327 compatible OBDII adapter (Bluetooth or WiFi) with any OBD compliant vehicle with OBDTest..
  • Read your car RPM, Oxygen Sensors Voltage, Accelerator Pedal Position among many other parameters in real-time (available parameters depend on vehicle under test)..
  • Find out what is turning on the Malfunction Indicator Lamp by reading the Diagnostic Trouble Codes, and erase them..
  • Share a test snapshot with all of the readings obtained..
  • This lightweight application summarizes all OBD functions in a simple and highly configurable interface..
Check Stock

Particulate Filter ELM327 OBD2

Check Stock