ReviewsEnamelling Die

Howards End

  • PRECISE MATING OF LOCK RING: Easy-to-use cross bolt connects the two ends of the ring instead of a traditional screw design that tightens directly into the threads of the die, resulting in a more precise mating of the lock ring threads to the die threads..
  • RELIABLE ALIGNMENT: Full size lock ring provides a more reliable alignment with no canting, and no damage to the die threads, which remain undamaged..
  • EASY ADJUSTMENT: Tightening or loosening the steel cross bolt screw requires only a 7/64″ Hex/Allen Key (not included)..
  • STANDARD FIT: The Forster Cross Bold Die Lock Rings fit standard 7/8″-14 thread dies from most manufacturers..
  • FOR FORSTER SEATER & SIZING DIE: Works with all Forster Products high-quality sizing and seater dies. The Forster DIE-G-10 is a direct replacement part for the lock rings on Forster sizing and seater dies..
Check Stock

Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT

  • Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT.
  • ​​​A Tail Stock Tap Die Holder Should Be Among The First Accessories a Machinist Makes For His Lathe, Since Threading With A Hand Held Die Stock....
  • 3 Die Holders Are Interchangeable & Can Hold Die Sizes of 13/16" + 1" + 1-1/2"..
  • 3 Tap Holders Are Interchangeable & Can Hold Taps 0" to 1/4" + 1/4" to 1/2" + 1/2" to 3/4".
  • EXCLUSIVE - TAP AND DIE HOLDER SET - OTHER SIZE MT1 AND MT3 IN OUR SHOP !.
Check Stock

Sizzix Accessory Black Mini Set Inspired by Tim Holtz Die cutting tool kit

  • MINI TOOL SET - The perfect black mini set that has been inspired by Tim Holtz, it's a great accessory to your crafting kit..
  • DIE PICK - The Die Pick, picks scraps out of dies and small pieces of paper from the die cut-out..
  • MINI DIE BRUSH - The Mini Die Brush rolls away excess paper in any wafer-thin, chemically-etched die..
  • MINI FOAM PAD - Mini Foam Pad act as a perfect work surface for removing excess paper from the dies and the cut-out!.
  • PRODUCT DIMENSIONS – Foam Pad (5. 2” x 0. 5” x 0. 5”).
Check Stock

Anna Griffin AG-523H Fancy Flip Card Kit Die Single

  • 20 cards 20 die cut shapes 10 card stock sheets 48 interior sentiment stickers 24 Exterior sentiment stickers 24 Exterior sentiment die cuts.
  • Also includes 72 flower die cuts 48 foil stamped corners 30 foil die cuts 1 mat 1 set of dies 150 foam adhesives 30 envelopes perfect for any crafter.
Check Stock

Forster Products Bench Rest Die Set 338 Lapua Magnum

  • Includes a Full Length Sizing Die and standard Bench Rest Seater Die in a Deluxe Die Box.
  • We recommend a Full Length Sizing Die/Bench Rest Seater Die set for each rifle caliber you own.
  • If using Forster Dies in a Forster Co-Ax press, shellholders are not required.
  • If using Forster Dies in any non-Forster press, use manufacturer-recommended shellholders.
Check Stock

Hornady Lock-N-Load Die Bushings, 10 Pack – Change Dies Quickly with a Simple Twist – Compatible with All Reloading Presses - Item No. 044096

  • Hornady Lock-N-Load Die Bushings – The Lock-N-Load bushing system will forever change the way you switch from one caliber to another. Lock-N-Load technology allows you to change dies and start loading another caliber in a matter of seconds. Includes 10 die bushings.
  • Maximize Reloading Time – Quickly and easily change from one die to another with a simple twist.
  • Positive Locking Action – Holds the dies in perfect alignment. Compatible with all Hornady Reloading Presses.
  • The Easy Way – Get the most out of your reloading press. Change the caliber by a simple twist of the die counterclockwise.
  • How to Use – Thread your die (7/8"-14 thread) into the Lock-N-Load Die Bushing and insert the assembly into the press bushing. Twist it clockwise to lock it in to position, then adjust your die as usual and tighten the lock ring.
Check Stock

Sizzix Adhesive Sheets, 6 by 6-Inch, 10/Pack

  • With the easy peel strip, these Adhesive Sheets are quick and easy to use. You can use them to transform your die cuts into stickers. Simply peel off the backing, adhere to your card stock, place your die on the card and roll through your die-cutting machine. Peel off the other backing from your die-cut and adhere to your make. Alternatively, you could make the sticker and use the sticky side to adhere glitter or gold leaf to decorate your die-cut..
  • This package contains ten 6×6 inch adhesive sheets.
Check Stock

18V OCTANE Brushless 1/2 in. High Torque 6-Mode Impact Wrench

  • ULTIMATE PIPE THREADER SET: Dependable, heavy-duty construction tools including die heads, ratchet assembly, ratchet handle, alloy dies, and a coordinating carrying case for organized use on job sites.
  • DESIGNED FOR EASE OF OPERATION: Makes threading pipe or conduit quick and effortless and uses individual die heads for each pipe size and manually operated ratchet.
  • DUCTILE CAST IRON DIE HEADS: Kit includes 1/2-in., 3/4-in., 1-in., 1-1/4-in., 1-1/2-in., and 2-in. sized die heads, and all of the sizes fit in the ratchet without any additional pieces.
  • CONVENIENT CARRYING CASE: Lightweight yet rugged carrying case accommodates all dies heads in the set to keep them organized and together and features labeled compartments for clear identification.
  • 1/8"-2" PIPE CAPACITY: Works with any 12-R die heads with a 1/8-in. to 2-in. pipe capacity, all threader sets use the same 12-R dies in die head.
Check Stock

Cuttlebug Cutting Plate B 6'X13'-

  • Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting..
  • Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
  • The see-through PC plastic allows easy placement of materials for a precise die cut..
  • Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
  • The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock

Eastwood 3/16 Die Kit Replacement Brake Line Tubing Flaring Tool 45-Degree Single Double and Bubble Brake Flares

  • Flare Punch Set For Eastwood Pro Brake Tubing Flaring Tool.
  • Direct Replacement For Your Worn 3/16” Die Set.
  • Restores Like New Performance To The Eastwood Pro Brake Tubing Flaring Tool.
  • This Kit Includes The Op1 Punch Die, The Op2 Punch Die And The 3/16 Inch Die Plates To Make A Complate Kit To Refresh The 45 Degree Turret Head.
Check Stock

CraftFIRST 9x12.5 Clear Cutting Plate 2PK for Gemini Die Cutting and Embossing Machine Logia A4 Die Cutting Machine

  • COMPATIBILITY- Compatible with Gemini Die Cutting & Embossing Machine Logia A4 Die Cutting Machine.
  • DIE CUTTING - Protects your dies and materials when passing through the die cutting machine.
  • DURABLE- Made of high quality Polycarbonate plastic, more durable than acrylic plates.
  • TRANSPARENT – The see-through PC plastic allows easy placement of materials for a precise die cut.
  • PRODUCT DIMENSIONS 9" x 12.5", contains two plates.
Check Stock