ReviewsEnclosure For Education

2 Kicker 43CVT102 COMPVT 10 1600w Shallow Slim Car Subwoofers Subs CVT10-2

10" CompVT 2 Ohm: The CompVT 10-Inch Subwoofer is a 2slimline driver. Precise KICKER engineering allows the CompVT to pound with limited space. A....
Features/Specifications: (2) Kicker 43CVT102 10" 1600 Watt Single Voice Coil 2-Ohm Car Audio Subwoofers. Power Handling : Peak :800 watts. RMS :400....
Dark gray modified-spoke cone with bracing for clear bass response. Ventless solid-pole design for direct mount to enclosure rear wall. Steel....
Durable Spiralead tinsel leads. Stitched surround for enhanced cone-to-surround strength. Tough double-stitched surround. Special spring-loaded....
Minimum Sealed Enclosure : 0.8 cu. ft. Maximum Sealed Enclosure : 3 cu. ft. Minimum Ported Enclosure : 1.25 cu. ft. Maximum Ported Enclosure : 1.75....

Check Stock

ORICO 5 Bay Raid Hard Drive Enclosure Magnetic Aluminum USB 3.0 to SATA for 3.5 inch HDD Tool Free Storage Case Support 7 RAID Modes Up to 80TB(5X16TB) - NS500RU3

7 RAID MODES -- The ORICO 5 bay raid enclosure equipped with raid function for the various uses. The 5 bay external hard drive enclosure can support raid 0/1/3/5/10/JBOD/Clone and normal raid to allow users to adjust and set up by dialing combination according to your needs..
LARGE CAPACITY -- Every single disk of the 3.5 usb raid enclosure can reach up to 16TB, altogether 80TB larger capacity for the enterprises big data backup and storage, also a good choice for nas expansion. The 3.5inch sata enclosure can support 3.5inch HDD and 2.5inch SSD/HDD with a bracket..
QUALITY CHIP CONTROL -- The 5 bay usb enclosure adopts three high quality chips, which has both transmission performance for fast 5Gbps and stability and can carry the huge data interaction of the enterprise, reduce the delay..
GOOD HEAT DISSIPATION PERFORMANCE -- A 92mm cooling fan built in the usb drive enclosure with honeycomb dissipation holes at the back of the 3.5 hdd enclosure, and the aluminum alloy material made the whole 5 bay external raid enclosure can helps to accelerate the flowing wind and heat dissiapation for prolong the service life of the hard ....

Check Stock

ORICO 2.5 inch External Hard Drive Enclosure USB3.1 Gen1 Type-C to SATA for 7/9.5mm HDD/SSD Tool Free Max 4TB Support UASP Compatible with PS4,Xbox,PC,TV,Samsung,WD -2521C3

【Ideal Hard Drive Enclosure】-- The ORICO 2.5 hdd enclosure with durable apperance and classic black color with the advantage of easy to clean. Holds the 2.5 hard drive enclosure in the office, just connect your pc, routers and other devices, plug and play.
Protect Your Precious Data - This 2.5‘’ hard drive enclosure made by ABS plastic,which is durable and has the advantages of heat resistance and corrosion resistance. Built in anti-shock pad, which is stable and can better protect your drive.
【USB3.1 Gen1 5Gbps Enclosure】-- Adopting with usb3.1 type-c interface and UASP accelerated transmission protocol supported, computer hard drive enclosure can helps with the data transfer rate up to 5Gbps, about 20% faster than traditional usb data port, trasfer 1G files in 3 seconds, no data delay.
【Wide Compatibility Enclosure】-- The 2.5'' hard drive enclosure can support 7-9.5mm hdd/ssd up to 4TB for any brand hard drive with SATA I/II/III port. Also compatible with Windows, Linux and Mac OS systems, compatible with WD, Seagate, Samsung, PS4, TV, and other devices.
【Tool Free Installation】-- Push the cover of the external drive enclosure and insert your hard drive in then connect your devices and play. A led indicator also can inform you the h....

Check Stock

ORICO 2.5 inch External Hard Drive Enclosure USB 3.0 to SATA III for 7mm and 9.5mm SATA HDD SSD Tool Free [UASP Supported] Black (25PW1-U3)

【2.5" Hard Drive Enclosure】 ORICO hard drive enclosure can easily connects 2.5 inch SATA I/II/III SSD & HDD to PC, laptop, router, PS4, or Xbox for data transfer or expanding storage, recovering your old hard drives datas and make it rejuvenate.
【5Gbps with UASP Accelerated】The maximum data transfer speed of the SSD enclosure is 5Gbps. The SATA interface of 2.5 hard drive enclosure supports UASP accelerated transmission protocol, 70% Faster than conventional USB 3.0 when connected to a computer that also supports UASP. Backward compatible with USB 2.0 or 1.1 ports.
【Easy Installation】Tool-free installation, plug & play, no driver is needed for this 2.5 SATA enclosure. Just push out the cover, plug in the drive, close the cover and connect to your device. Hot-swap supported. No request for extra power supply.
【Stylish and Portable】 Our HDD enclosure is made of lightweight ABS, slim and handy size make it convenient to take around. We have black white blue pink 4 colors with different combinations, you can flexibly choose the quantity and color combination.

Check Stock

Baijixin External USB 3.0 Enclosure Case for Slim 9.5mm SATA Optical CD/DVD/Blu-Ray Drive

USB 3.0 Slim 9.5mm SATA ODD Enclosure : Remove your laptop 9.5mm Optical Drive and install into this enclosure to turn it into an external Portable USB Optical drive. Increase the capabilities of your computer by adding external support for a DVD or Blu-ray ROM drive. (Note: This ODD case Only Fit for 9.5mm SATA Tray-load Type optical drive, Not Fit for 12.7mm / IDE Interface / Slot in Load Type optical drive) .
Compatible: For Windows XP/2003/Win7/Win8/Vista/,Linux,Mac 10 OS system. This durable optical drive enclosure helps make your laptop, Ultrabook or desktop even more powerful..
High Performance: With USB 3.0 interface, the drive enclosure supports up to 5Gbps transfer rate. You can access videos and other large files quickly to save valuable time while you’re on the go. It’s also backward compatible with USB 2.0 and 1.1, so you’ll be able to connect your optical drive to older computers..
Easy to Use and Compact Portability: The thin optical drive enclosure designed to be compact and light to complement your Laptop. Also The enclosure is USB-powered, so you won’t have to carry a power adapter while on the go..
Service Guarantee: With 24 Hours friendly and easy-to-reach Customer Service. The product by BaijixinStore is with....

Check Stock

QCAda Trampoline Pole Caps 1.5 Inch Diameter Enclosure Safety Caps Trampoline Pole Cap with Bolt, Universal Trampoline Caps for Poles for Trampoline Net

You Will Receive:The package contains 8pcs blue trampoline enclosure pole caps and 8pcs screw thumbs.
will make you fully prepared to deal with parts damage or loss..
Quality Material: The trampoline enclosure pole caps are Made of plastic and screws, which are durable enough for you to apply a long period of time..
Safety Protection: After using the trampoline pole cap, The Large Trampoline Enclosure Pole Caps can help regulate the safety net on the top of the poles.
and can reduce the injury of children from hitting the top of the sharp pole It will make your trampoline more stable..
Simple Installation: The installation of the trampoline enclosure pole caps is easy for you to operate.
You just need to fasten screw thumb to pole cap by hands..
Dimension: The trampoline enclosure pole caps are designed to fit 1.5 inch diameter enclosure poles, which are suitable for replacement.

Check Stock

Focusing on Laser Engraving and Decorating: Affordable, Versatile, and Creative Marking, Engraving, and Cutting

Sleek Modern and Efficient look design – Excellent structural design ensures air tightness, protects your safety & health away from smog, noise, dust and pungent odor anytime and anywhere, maintains clean indoor air..
Flame Retardant and Smoke-Proof – xTool Enclosure has careful material selection.Outer PU cross-grain layer is waterproof for wiping and cleaning. And the inner 600D flame retardant polyester fabric layer is fireproof and has a strong smoke barrier..
Sturdy Construction – The honeycomb board material layer is chosen for the middle layer of the housing material and supplemented by 1 Polyester edge ensures high hardness for xTool Enclosure..
Foldable & 1 Minute Set Up & All in One Design- Smart elegant shaped design, xTool Enclosure using the principle of airflow to greatly improve the exhaust efficiency to 200%. Storage design on the side of the enclosure greatly improves the space utilization..
Ultra Eye Protection – Above the enclosure is a 17.91”x9.84” (455x250mm) viewing window made of laser light filtering PC. You can observe the laser engraving and cutting process more safely. Suitable for most Laser Engravers on the Market – Product size Up to 24.6”x 24”x 12.2” (Inner size: 23.6”x 23.2” x 11.8”) ,xTool E....

Check Stock

10L0L 4 Passenger 600D Golf Cart Enclosure for Club Car Precedent,4 Side Opening Club Car Precedent Winter Driving Cover with Security Side Mirror Openings (People Could seat in The Rear seat)

【New Improved Model-ZIPPERS】 This 2023 model club car precedent driving enclosure use heavy-duty zippers.Club car enclosure added load-bearing hemming fabric so the zipper is smooth and won't cause the membrane to break.
【New Improved Model-SIZE】2023 new golf cart enclosures 4 passenger expanding space： Roof 56"x39", size of the cart 95"x60". increases the size of the club car enclosures, and helps the customer install safety handrails. golf cart enclosures are suitable and beautiful, and will not affect the comfort of passengers in the rear seat..
【Waterproof and Warm】 club car driving enclosure made in 420D Oxford polyester, super-clear PVC window, and resin door zipper.Awesome for camping when weather is wold or rainy, golf cart driving enclosure keeps you cozy and warm cold weather and rainy driving.
【Zip Down Windshield】Club car 4 passenger enclosure with upgrade design, the windshield can be completely removed and stored in the front zippered pocket.
【Transparent Rear Light Display】 The club car precedent rain enclosure is made o....

Check Stock

ORICO 2.5'' External Hard Drive Enclosure USB3.0 to SATA Transparent Computer HDD Enclosure for 7/9.5mm HDD SSD, Portable Hard Drive Case with UASP Max 4TB Compatible Xbox,PS4,Samsung,WD,Seagate-2580

[Retro Hard Drive Enclosure] -- High quality transparent PC board with clear of the full inner.
The 2.5 SSD external hard drive enclosure with the differ vintage tape which can DIY computer drive enclosure by self and convenient to distinguish your data. The sata hdd enclosure is suitable as a gift with nostalgic and exquisite appearance.
[5Gbps UASP Fast Speed] -- The external drive enclosure is designed with SATA to USB3.0 protocol with the maximum transfer rate can reach up to 5Gbps, at the same time, the external hdd enclosure can support UASP accelerated transmission protocol to greatly improved the storage or backup efficiency of the devices.
[User Friendly] -- Non tool-free with the 2.5'' hard drive enclosure, you can easily install and remove the hdd/ssd in 3 seconds and hot swapping supported. 10 minutes auto sleep mode after no operation. And the blue LED indicator can helps you to monitor the working status of the hard drive, easy work easy life.
[Widely Compatibility] -- The ORICO 2.5 sata to usb external hard drive enclosure can support the 2.5 inch sata port 7/9.5mm hdd/ssd. Max 4TB capacity can helps to storage the music, movies, photos and so on. The 2.5 usb drive enclosure also compatible with PC, TV, PS4, Xbox and other devices.

Check Stock

Everything But Stromboli SSD Enclosure Case for SATA 2.5 Hard Drive/Solid State Drive USB 3.0 Cable Tool Free Type Works with Samsung PNY Kingston SanDisk 9.5mm x 2.5 Inch HDDs or SSDs

This single unit 2.5 Inch Hard Drive Enclosure is perfect for your business, IT Department, home computer, or gaming set-up. Box Includes (1)....
Easy, Tool Free installation – simply open case and insert 2.5 Inch SATA HDD or SDD. This product is designed for standard size disk of max 9.5mm....
SATA III Enclosure for SSD or HDD: Enclosure is optimized for Sata III, backward compatible with Sata I and Sata II.
USB 3.0 Enclosure for SSD: 3.0 USB Speed Cable to connect your SSD/HDD from your SATA Enclosure to your USB port on laptop, desktop, Windows, Mac,....
Enclosure for Samsung SSD, Kingston SSD, PNY SSD, SanDisk SSD - Works with/Compatible with Samsung SSD 860 EVO 2.5 Inch SATA III Internal (250GB,....

Check Stock

LulzBot Nylon 3D Printer Enclosure by galaxG Design World

Enclosure can be setup and collapsed in minutes.
Self-sealing, magnetic front flap provides easy access for part removal, with a built-in transparent window for monitoring print progress.
Enclosure doesn't need to sit on table surface once assembled. Instead, the enclosure rests on the 3D printed support piece connected to the top of....
Personalize your nylon enclosure by 3D printing the required mounting hardware in your favorite color.
Dimensions-33.5 W x 33.5 L x 29.5 H inches.

Check Stock