ReviewsEncoder Multiplexer

DAOKI 10PCS Rotary Encoder Module KY-040 Brick Sensor Switch Button Development Board with 10PCS 15×16.5mm Knob Cap, Dupont Cable for Arduino AVR PIC

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 240 Pulses Per Revolution: Gear Reduction Ratio: 1/20, Each Loop Output Pulses: 12PPR 20*12=240PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

Sensitive Professional Arcade Buttons Diy Kit Plastic And Metal Colourful Arcade Diy Kit for Mame Fight Stick

  • Professional 8 way Joystick with terminal for playing 2/4/8 way Arcade Fighting Games. A compact encoder with size of 8.5cm x 3.5cm..
  • Easy installation design, simply connect your arcade controls to the encoder board with the included wires, then plug the encoder into your computer....
  • Zero Delay Arcade USB Encoder with USB Cable & Wires. Perfect Kit for Arcade PC Game DIY Project..
  • Use the accessories to build your own Arcade Game Machine..
  • Support all windows systems, such as XP, Win7, Win8, Win10, etc. Compatible Model: For MAME & For Fight Stick, etc..
Check Stock

Treedix TCA9548A I2C Multiplexer Breakout Board 8 Channel Expansion Board with pi Header for Arduino

  • The TCA9548A Breakout board supports communicating with multiple I2C devices with the same address, making it easy to interface with them..
  • TCA9548A multiplexer features: bidirectional eight-channel I2C multiplexer, active low reset input.
  • The default address of this expander is 0x70, the address can be changed, and can be set within 0x70~0x77..
  • In the address of 0x70~0x77, 8 expanders can be cascaded, and each expander can be connected to 8 devices with the same address, so that the same I2C port can be connected to 64 devices with the same address and can be used normally..
  • The chip is compatible with 3V and 5V and can be used with any logic level.
Check Stock

Installer CCTV 4CH Video Color Quad Multiplexer with Loopout Remote Control and Free 1 Amp Power Adapter

  • The 4Ch Video Color Quad Multiplexer allows several video signals from CCTV security cameras or other analog video devices to be combined and displayed on one monitor. The video processors are also commonly referred to as video mux, CCTV multiplexer, or color quad processor..
  • Full screen displays at real-time refresh rate for each channel. Multiple and automatic display by turn mode: 4Ch, 2Ch, Single Channel.
  • Camera title, time and date display for easy identification, 4 Channel BNC input and 2 Video BNC outputs.
  • Switch between NTSC and PAL system. Picture in Picture show, PIP position switched (top left, top right, bottom left, bottom right corner). High-Resolution Picture show, Adjust individual resolution. High-quality Screen Freeze function..
  • Free 1Amp Power Adapter and remote control Included.
Check Stock

OEM Nexperia 74HC4067PW,112, Analog Switch/Analog Multiplexer Single 16:1 24-Pin TSSOP Bulk (100 Items)

  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
Check Stock

Professional Arcade Buttons Diy Kit, Wear-Resistant Sensitive Arcade Diy Kit , Zero Delay Windows Systems for Fight Stick Mame

  • Professional 8 way Joystick with terminal for playing 2/4/8 way Arcade Fighting Games. A compact encoder with size of 8.5cm x 3.5cm..
  • Easy installation design, simply connect your arcade controls to the encoder board with the included wires, then plug the encoder into your computer USB Port. And then enjoy your arcade games with your PC..
  • Use the accessories to build your own Arcade Game Machine..
  • Zero Delay Arcade USB Encoder with USB Cable and Wires. Perfect Kit for Arcade PC Game DIY Project..
  • Support all windows systems, such as XP, Win7, Win8, Win10, etc. Compatible Model: For MAME and For Fight Stick, etc..
Check Stock

Hikig Zero Delay LED PC Encoder USB to Joystick for LED Arcade Buttons & Joysticks - DIY Your Own Arcade Game Console - MAME, Raspberry Pi Compatable

  • 2-Player LED USB Encoder Set: This is a 2-Player LED Arcade USB Encoder Set. Power Your Standard LED Arcade Buttons Directly..
  • Compatable for Almost All Type Joysticks: The Wire harness compatable for no matter Standard American Style Joystick or Japan 5Pin Style Joysticks..
  • Voltage: 5V (The Encoder Board Output 5V Power for both joysticks and LED Arcade Buttons..
  • 100% Zero Delay: Both Encoder Boards are 100% Zero Delay to Offering Better Game Experience..
  • Support Standard LED Arcade Buttons. The Set including 20 Pcs 3Pin Cables for the LED Buttons. Easy to install..
Check Stock

Avisiri 2 Player Arcade Joystick DIY Parts 2x USB Encoder + 2x Elliptical Joystick Hanlde + 18x American Style Arcade Buttons for PC MAME Raspberry Pi Windows Red & Blue

  • 2-Player LED USB Encoder Set: This is a 2-Player LED Arcade USB Encoder Set. Power Your Standard LED Arcade Buttons Directly..
  • Compatable for Almost All Type Joysticks: The Wire harness compatable for no matter Standard American Style Joystick or Japan 5Pin Style Joysticks..
  • Voltage: 5V (The Encoder Board Output 5V Power for both joysticks and LED Arcade Buttons..
  • 100% Zero Delay: Both Encoder Boards are 100% Zero Delay to Offering Better Game Experience..
  • Support Standard LED Arcade Buttons. The Set including 20 Pcs 3Pin Cables for the LED Buttons. Easy to install..
Check Stock

38mm Outer Diameter Solid Shaft 6mm Optical Rotary Encoder 2000 PPR 5V Line Driver

  • ✔Specification: Outer Diameter Dimension: 21mm.
  • Operating Temperature Range:-40℃~120℃.
  • ✔Feature:Two matched Hall switches on a substrate.
  • High sensitivitts a wide voltage range (2.5V~24V).
  • ✔Wiring Diagram:Red - Motor power terminal(+).
  • ✔Tips:Be sure to keep the wiring connection correct before Working.
  • Be sure to keep the motor stopped before change the CCW/CW direction.
  • ✔Quality Guarantee: All quality problems, pls send us e-mail firstly, we will give you satisfactory solution, and we're concentrating on our constant improvement of product quality and customer service, pls trust our brand "BEMONOC" and give us the chance, thanks!.
Check Stock

Arcade Game Joystick Kits Compact Design 8 Way Joystick Arcade Game DIY Kit Parts Wide Application for MAME for PC Game for Fight Stick red

  • Professional 8‑way joystick with terminal for playing 2/4/8‑way arcade fighting games, compact encoder with of 8.5cm x 3.5cm/3.3x1.3in..
  • Easy to install design, just use the included wire to connect your arcade controller to the encoder board, and then plug the encoder into the USB port....
  • Zero delay arcade USB encoder with USB cable and wires, perfect kit for arcade PC game DIY projects..
  • The arcade game kits support for systems, such as for XP, for Win7, for Win8, for Win10, etc..
  • Use the accessories to build your own arcade game machine, install button by users, and compatible models are for MAME, for Fight Stick, etc..
Check Stock

WSDMAVIS 1 Pcs Rotary Encoder E6B2 CWZ6C E6B2-CWZ6C 1024P/R DC 5-24V for OMRON

  • Type: 2pcs 360 Degrees Rotary Encoder Module, Model: KY-040, Working Voltage: 5V, Pulse Count Per Circle: 20.
  • Purpose: The rotary encoder can count the quantity of output pulse in the positive and negative direction rotation. The rotation counting is unlimited..
  • An incremental encoder is a rotating sensor that converts rotation displacement into a series of digital pulse signals. These pulses are used to control angular displacement..
  • The reading system usually uses differential mode to compare two different waveforms, but the phase difference is 180 degrees, so as to improve the quality and stability of the output signal..
  • With the button on rotary encoder, it can be reset to the initial state, that starts counting from 0..
Check Stock