ReviewsEnd Effector Clamp

SMALLRIG Articulating Magic Arm with Screw Ballhead and NATO Clamp Ballhead, Monitor Mount for Field Monitor, Lights, Audio Recorders, DIY Camera Rig - 2071

  • ▶ NATO Clamp Ballhead: Attach cage with NATO rail with on the other end via ballhead with NATO clamp, while it could attach monitor cage on the other end via ballhead with 1/4’’ screw.
  • ▶ Quick Release & Adjust Angle: It features quick release and attachment and could be slid to get the balance of the whole kit.The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp.
  • ▶ Precision locking device: A single wingnut is applied to lock the double ballhead tight directly, and thumb screws on both ends are utilized to lock the devices manually and a spared hex spanner is ready to lock it tighter.
  • ▶ Extensive compatibility: The ballhead with 1/4″ screw thread can not only be connected to monitors, camera cages (such as gh5 cage rigs SMALLRIG 2049, SMALLRIG 2050, SMALLRIG 2051, SMALLRIG 2052), but also can be attached to monitor cages with NATO rail, such as Cage(5″) SMALLRIG 1726, SMALLRIG 2008,SMALLRIG Cage for Ninja Assassin 1788, SMALLRIG Monitor Cage 1834 or other products with nato rail.
  • ▶ What You Get: 1 x Ballhead with 1/4’’ Screw.
Check Stock

5/8' Aluminium Garden Hose Repair Connector with Stainless Steel Clamps, Male and Female Garden Hose Fittings, Mender End Repair Kit,Water Hose End Mender,Fit for 5/8' Garden Water Hose Fitting, 4 Set

  • Garden Hose Repair Connector：4 sets female and male hose repair connector with clamp, 8pcs Stainless steel clamp，8 extra Garden Hose Washer Rubbers.Fit for 5/8" hose fittings.Pipe joint diameter is 16-16.5mm, Standard 5/8" hose inner diameter is about 15.8-17mm, Our product is a little smaller than stand size which make it easy to insert or pull out 5/8" hose.with the stainless tightening clamp you can make it tightly as you want..
  • Aluminium Garden Hose Mender End Repair Kit : Female and male hose repair connectors are made of high quality aluminum, he surface oxidized to copper-like color，the clamps are made of stainless steel.Heavy-duty Aluminum metal construction with rust proof,Please note our connector are made of Aluminum , not brass.Our product Completely lead-free..
  • Easy to use : Easy to connect and disconnect, use to repair and connect the water hose end.Easy to install these garden hose end replacement by hands, 8 pieces stainless steel tightening clamp with rust proof for you to use or replace, effectively avoid leakage, it's good choice for your backup tool of hose mender..
  • Widely Application: These garden hose end replacement has a wide range of applications such as outdoor faucet, garden hose, hose splitter, filter, sprayer, sprinkle....
Check Stock

CPELLESSE 16 pcs Metal Double Rope, Clamp Rope 1 inch Zinc Plated Rope Clamp Lasso Rope Suitable for Rope, Lead Rope, Beck Rope, Lunge Line, Cross Tether

  • ★Material: The double rope clamp is made of metal, which is not easy to rust, and is strong and durable..
  • ★Size: The width of this double rope clamp is 36mm/1.41inch and the height is 20mm/0.78inch..
  • ★Design Features: The double pliers design of this double rope clamp is ideal to form a loop at the end of the rope and fasten the rope where there is no slippage..
  • ★Wide Uses: This double rope clip works very well both indoors and outdoors. Use them to create pet leashes, horse leads, fender wires, key chains, or use them on your boat, dock, etc..
  • ★Easy to install: Clamp two ropes together to form a loop at the end of the rope, or fix the rope in place without slipping..
Check Stock

ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots 50 inch Clamp

  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use..
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides..
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtu....
Check Stock

ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (36 inch Clamp)

  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use..
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides..
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtu....
Check Stock

Magic Arm Camera Mounts Clamps w/ 1/4' and 3/8' Thread, 19.7” Adjustable Friction Power Articulating Arm with 2.6' Super Clamp for LCD Monitor/LED Light/Camera Video Rig/Smartphone

  • 【19.7" Magic Arm】 The long articulating arm camera mount clamp comes with a 19.7" adjustable friction hinged magic arm, with 1/4" screws at both ends, which can be installed with LCD monitor/LED light/ Video Vlog Rig through one end 1/4" screws. Meshing teeth design in the middle, provide more stability and security, easily tighten the joint of magic arm by turning the hi-torque screw. The extra-long magic arm can better meet your needs for length..
  • 【2Pcs Multifunction Super Clamps】The camera mounting clamp magic arm has two metal clamps: 2.16”/55mm (max) camera clamp with 1/4" and 3/8" threads, 2.56”/65mm (max) bidirectional (horizontal/vertical) metal table desk clamp. The camera mount clamps are made of lightweight aluminum alloy, which is more durable. The 2.16” super clamp with threads can be mounted virtually anywhere, such as cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps..
  • 【360° Rotation Ball Head】360° ball head articulating design adjusts any angles based on your needs. With 1/4" thread on both ends to install any on-camera flash lights, microphone, LCD monitor, DV Monitor, microphone on one end and other accessories like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Releas....
Check Stock

ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots All 3 Clamps 24 36 and 50 inch

  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use..
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides..
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtu....
Check Stock

3 Sets 5/8 Inch Brass Garden Hose Repair Kit Mender End Water Hose End Mender Female and Male Hose Connector with 6 Pieces Stainless Steel Clamp

  • About size: the brass garden hose mender’s diameter is approx. 15.0 mm/ 0.59 inch, fit for 5/8 inch hose for easily insert and remove hoses, please select the corresponding size before purchasing.
  • Material: the materials of hose mender and clamp are rustproof and solid, you can use them for a long time, the hose mender is made of quality brass, the clamp is made of stainless steel.
  • Simple installation: you just need to install these garden hose end replacement by hands, no complicated process, using the stainless steel clamp with hose mender can effectively avoid leakage.
  • Widely applying: these garden hose end replacement are suitable for using with water faucet, sprayers, garden hose and so on as long as the size matches, helping you solve some problems about repair.
  • Package information: come with 3 sets brass garden hose mender and 6 pieces stainless steel tightening clamp for you to use or replace, it’s good choice for your backup tool of hose mender.
Check Stock

Hourleey Garden Hose Repair Fittings, Zinc and Aluminum Male and Female Hose End Water Hose Repair Connector, 4 Pack

  • Package include: 2 pack female thread end hose repair connector with zinc clamp, 2 pack male thread end hose repair connector with zinc clamp.
  • Material: female and male hose repair connectors are made of high quality aluminum, the clamps are made of zinc, the screws are made of stainless steel.
  • Easy to use: easy to connect and disconnect, Hourleey repair connector can be use to repair and connect the water hose end..
  • Widely use: Fit for 3/4" or 5/8 hose fittings, the screws will not strip when tightened..
  • Good Service: If any problem, please feel free to contact us, Prince Team offer replacement and full refund services..
Check Stock

LUMITECO 1/4 Lock on air Chuck,Mini air Compressor Portable tire inflator tire Chuck Hose end with Barb Connector for Hose repair-3Pack

  • 90 degree lock-on tire inflator chuck for portable tire inflator, for bike, motorcycle, car.
  • 1/4" ID Hose Barb end makes it the perfect choice for hose repairs.
  • open flow with a lock-on clamp make it easy for hands free tire inflation.
  • 1 all metal air chuck end,2 metal+reinforced air chuck end ,1 free worm gear hose clamp.
  • To use the all metal chuck under 170psi,and use the metal+reinforced chuck under 120psi,heavy truck/vehicle forbidden..
Check Stock

Aluminium Garden Hose Repair Connector with Stainless Steel Clamps, Male and Female Garden Hose Fittings, Mender End Repair Kit ，Water Hose End Mender，Fit for 3/4" Garden Hose Fitting, 2 Set

  • Garden Hose Repair Connector：2 sets female and male hose repair connector with clamp, 4 pcs Stainless steel clamp，4 extra Garden Hose Washer Rubbers.Fit for 3/4″ hose fittings.
  • Aluminium Garden Hose Mender End Repair Kit : Female and male hose repair connectors are made of high quality aluminum, he surface oxidized to copper-like color，the clamps are made of stainless steel.Heavy-duty Aluminum metal construction with rust proof,Please note our connector are made of Aluminum , not brass.Our product Completely lead-free.
  • Easy to use : Easy to connect and disconnect, use to repair and connect the water hose end.Easy to install these garden hose end replacement by hands, 4 pieces stainless steel tightening clamp with rust proof for you to use or replace, effectively avoid leakage, it’s good choice for your backup tool of hose mender..
  • Widely Application: These garden hose end replacement has a wide range of applications such as outdoor faucet, garden hose, hose splitter, filter, sprayer, sprinkler, nozzle, timer, etc. It will help you solve some problems about repair as long as the size matches.
  • An ideal hose repair part, you can easily place an order. If you have any questions, please feel free to contact us. We will help you solve the pro....
Check Stock