ReviewsEnd Effector Mount

Multi Effects Guitar Pedal Mini Tremolo Single Delay Chorus Phaser Reverb Guitar Accessories

  • Portable: It is a portable multi-functional electric guitar effect device.A variety of functions in one, small size, good performance, easy to carry....
  • Editing: The user can edit the timbre to cover the storage, the operation method is simple and intuitive..
  • Built-in Battery: This effector has a built-in battery, which solves the problem of long distance power supply..
  • Multi Use: There are nine classic box head simulations, two modulation effects (chorus, phase shift), one tape delay, one reverb effect, eight classic....
  • Function: Also with mobile phone recording function, wireless music playback function and sound card function..
Check Stock

Trolling Motor Accessories, Haoguo Paddle Boat Parts, Boat Rudder Fits Most 24-55 Thrust Trolling Motors, Great for Pontoon, Fishing Kayak, Canoe, Jon Boat

  • ...ce life and allowing you to focus more on fishing.
  • MORE CONTROL – Turns easily when steering and provides better control in wind and most weather conditions, decreasing the need for oars, it does help to keep your boat on course in the wind, and prevent the boat from spining as much when the motor is off.
  • UNIVERSAL MOUNT – Compatible with most electric trolling motors (24 to 55 thrust). Ideal for use as a canoe rudder, or a inflatable pontoon rudder, kayak rudder, or pelican bass raider 10E rudder. Please note, it will NOT work on a self deploy bow mount trolling motor.
  • EASY INSTALLATION – Complimentary socket wrench for easy installation, it takes only a few minutes to attach the rudder to the shaft of your small watercraft motor and can be mounted in an upright position on the front or back of the shaft. You may even mount it with the short end down (upside down) for shorter motors. A universal design for your needs.
  • BOW MOUNT – Fits the EDGE, Minn Kota, MAXXUM, and FORTREX. The bow mount motor must be a hand cable pull, NOT self deploy. Your bow mount setup needs to have 1ft shaft protruding from the end of the platform allowing enough room to attach the rudder.
Check Stock

Winegard SW-0012 Gable End Mount for Antenna

  • Adjustable 48″–60″ To fit most roofs.
  • Provides a secure mount by holding the mast in 2 places.
  • Adjustable 48″¿60″ To fit most roofs.
  • Adjustable 48″¿60″ To Fit Most Roofs.
  • Provides A Secure Mount By Holding The Mast In 2 Places.
Check Stock

Airuida Chrome Polish Wall Mount Kitchen Faucet 4 Inch(10cm) Spout Reach Adjustable Chrome Polish Mounted Installation Kit for Wall Mount Faucets

  • [Material]: Refined brass material construction, advance Chrome Polish finish resist corrosion and tarnishing, anti-rust..
  • [Function]: Double handle wall mount kitchen sink faucet can easy control cold and hot water.The spout can rotate 360 degrees..
  • [Design]:Low Lead Compliant High Quality Brass Material.One-piece construction prevents if from leaking.
  • [Install]:Connect the longer end to the back of wall mount faucet,the shorter end to water line,against washes at the back of Stainless Steel sink by lock nuts to secure faucet. Fit better for various faucets.Designed for simple installation. Allows installation of wall mount.
  • [Warranty]:Promises lifetime warranty, Any problem with this faucet, please contact us, provide any replacement in future use..
Check Stock

MeloAudio EXP-001 Volume Expression Wah Bass Guitar Effects Pedal l for Guitar & Bass with Instrument Cable

  • Ultra-smooth pedal movement for the utmost in comfort and control..
  • Small size for better placement on the effector mounting plate.
  • The pedal shaft is designed with damping. When it is not stepped, it will stay at the specified angle.
  • The EXP-001 Pedal delivers precision response and smooth action in a durable cast aluminum housing. Rubber pedal for comfortable play and non-slip....
  • The EXP-001 Pedal is compatible with any model or brand of effect that features a stand TRS expression input, such as TS MEGA, MIDI COMMANDER, Fractal....
Check Stock

Lithonia Lighting 40K SGLL 24 80CRI 4000K PIR M4 Adjustable Indoor LED Garage Light with Integrated Motion Sensor, 5000 Lumens, 120 Volts, 80 Watts, Damp Listed, Silver

  • Features a white high-gloss polycarbonate diffuser with passive infrared (PIR) motion sensor for easy on/off operation.
  • Integrated leds produce over 5,000 lumens with a 4000K cool white Color temperature and minimum starting temperature at -22 degree Fahrenheit.
  • The 360-degree PIR sensor activates when motion is detected, can be pre-set to automatically turn off from 1 to 10 minutes.
  • can link multiple Fixtures (flush mount only) and fixture operates at 120 volts, 60 Hz.
  • Includes end-to-end connector and 18-inch adjustable Suspension mount aircraft cable (18-inch link connector sold separately).
Check Stock

2 Truck Upfitters 16' Gas Props (15.7' ext, 9.4' Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings!

  • CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOPS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation..
  • Truck Upfitters Pair of 55 pound (each) gas struts. 15.7" extended length and 9.4" compressed length. This size of door shock absorber is for tall medium/heavy weight rear or side camper shell doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys..
  • These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must....
Check Stock

Airuida Brushed Nickel Wall Mount Kitchen Faucet 4 Inch(10cm) Spout Reach Adjustable Center Brushed Nickel Mounted Installation Kit for Wall Mount Faucets Connector

  • [Material]: Refined brass material construction, advance Brushed Nickel finish resist corrosion and tarnishing, anti-rust..
  • [Function]: Double handle wall mount kitchen sink faucet can easy control cold and hot water.The spout can rotate 360 degrees..
  • [Design]:Low Lead Compliant High Quality Brass Material.One-piece construction prevents if from leaking.
  • [Install]:Connect the longer end to the back of wall mount faucet,the shorter end to water line,against washes at the back of Stainless Steel sink by lock nuts to secure faucet. Fit better for various faucets.Designed for simple installation. Allows installation of wall mount.
  • [Warranty]:Promises lifetime warranty, Any problem with this faucet, please contact us, provide any replacement in future use..
Check Stock

Wall Mounting Triangle Boom Arm for Ring Light, Support 180° Flexible Rotation, 28-51in Adjustable Length, Save Space, for Monolight, Softbox, Umbrella and Reflector

  • Secure Mounting: Wall mounted boom arm is made of high-quality aluminum with a sleek black finish, Sturdy and corrosion-resistant for heavy duty work. The 4 expansion screws included in the package help you easily mount the ring light mount wall boom arm to a solid wall, Firm and secure. (The wall ring light need to be fixed on the load-bearing wall).
  • Flexible Design: The length can be extended up to 51in (130cm) to suit your different requirements. And the triangle structure adds stability to the wall mounting boom arm. And you can swing the boom arm up and down or side to side from 0° to 180° for obtain accurate beam angles or to take overhead photos, or fold it flat against the wall to save space when necessary..
  • Save Space - Extendable: Our ring light wall mount arm is a space-saving holder for strobe lights, Monolight, Ring lights, Softbox, Reflectors, DSLR and microphone. Saving more space, Helping to walk through in your studio, Making the space feel bigger and clutter free..
  • Widely Compatible:（L: 28in - 51in), Standard spigot head with 1/4 screw on one end and 3/8 screw on the other end, The ring light wall mount arm swivel is great and universal for create a studio for Vloggers, Streamers Photographers, Personal workshop, Beauty shop, Tatto....
Check Stock

21 Inch Pipe Mast for 18 Inch Dish, 1.66 Inch O.D.

  • Designed for mounting satellite dishes & outdoor over-the-air antennas.
  • Can mount on either the roof or side of house.
  • Easy to install | Complete with a solid mount foot.
  • Mount foot can be used on either end of pipe for best mounting.
  • Outside Diameter: 1.66” | Wall Thickness: 0.60” | Length: 21”.
Check Stock

Kleine Wolke Angled Wall Mount Sloped Walls and Matching Spring Rod - .98in / 25mm Diameter (White, Stall Width/29.5-49.2 in/75-125 cm)

  • Low Cost Solution for Installing Shower Rod on Sloped Wall.
  • All Mounting Hardware Provided Easy Installation - Screw Wall Mount into Wall.
  • Install Tension Rod Can Be Painted to Match Your Decor.
  • Non corrosive aluminum tension spring rod with a chrome or white finish and is .98in / 25mm in diameter with white hard rubber end caps.
  • Simply pullout to desired length and clamp into position,NO twisting necessary.
  • No hardware needed for the rod,If over extended you can reload tension by pulling it completely apart and sliding the NON spring end of the smaller diameter piece into the larger diameter piece.
  • Shortening possible by sawing off to a length of 20 cm..
  • One angled wall mount and one matching rod are included.
Check Stock