ReviewsEnd Fitting Polymer Insulator

MFJ-16E01 Extra Strong Fiberglass 450 Ohm Ladder Line End Insulator with SO-239 Connector

The MFJ-16E01 is an extra strong fiberglass, 450 Ohm ladder line end insulator..
It has a double weave ladder line for stress relief..
It is built in with an SO-239 connector..

Check Stock

EVIL ENERGY Fuel Filter Regulator 58 PSI Kit for LS Swap EFI Conversion

... Installation: fuel filter regulator kit for LS Swap EFI Conversion can be installed anywhere between the tank and the engine, although it is usually installed in the engine compartment to make it easy to obtain even more uniform fuel pressure. Mounting bracket and rubber insulator are included to make installation a breeze..
Package Included: 1pcs fuel filter/regulator, 1pcs 3/8'' EFI push on lock fitting for inlet, 1pcs 5/16'' EFI push on lock fitting for return, 1pcs 6AN male to 3/8 male push on EFI fitting for outlet..

Check Stock

Fevone Garden Hose 100ft Heavy Duty Water Hose 5/8 Garden Hose Flexible Lightweight Garden Hoses 100 ft, 3/4 Solid Brass Fittings

...ess. This 100 foot garden hose is flexible enough for no-fuss spooling onto or off of your hose reel, it's very easy to coil up.
This 100ft hose has high quality, standard - size, 3/4 - inch, solid brass connectors which smoothly and easily screw on and off of all of your hose bibbs (AKA outdoor faucets), this brass fitting stands up well to corrosion. These fittings are well made and seal tight, the female end pre-built with a rubber washer avoids leaking, the male end has just enough threads to firmly connect hose nozzle and sprayer.
This heavy duty garden hose has a nice sleeve cover at each end for gripping, this reinforced plastic cover adds more protection for the most vulnerable part of hose, in addition, this protective sleeve helps the hose kink less at the connection and keeps the hose from pinching off if it turns abruptly at the faucet or attachment end.
This 100' hose with a larger 5/8" size is a heavy duty water hose, made of 3-layers thick material that's still very flexible, this 5/8 hose supports working pressure of 150psi and burst pressure of 500psi, meanwhile the 5/8" size provides very good water flow, it's great for you to use this 100 foot hose to water the lawn, flowers and even hook it up to the pressure washer.

Check Stock

Fevone Garden Hose 75ft Heavy Duty Water Hose 5/8 Garden Hose Flexible Lightweight Garden Hoses 75 feet, 3/4 Solid Brass Fittings

... less. This 75 foot garden hose is flexible enough for no-fuss spooling onto or off of your hose reel, it's very easy to coil up.
This 75ft hose has high quality, standard - size, 3/4 - inch, solid brass connectors which smoothly and easily screw on and off of all of your hose bibbs (AKA outdoor faucets), this brass fitting stands up well to corrosion. These fittings are well made and seal tight, the female end pre-built with a rubber washer avoids leaking, the male end has just enough threads to firmly connect hose nozzle and sprayer.
This heavy duty garden hose has a nice sleeve cover at each end for gripping, this reinforced plastic cover adds more protection for the most vulnerable part of hose, in addition, this protective sleeve helps the hose kink less at the connection and keeps the hose from pinching off if it turns abruptly at the faucet or attachment end.
This 75' hose with a larger 5/8" size is a heavy duty water hose, made of 3-layers thick material that's still very flexible, this 5/8 hose supports working pressure of 150psi and burst pressure of 500psi, meanwhile the 5/8" size provides very good water flow, it's great for you to use this 75 foot hose to water the lawn, flowers and even hook it up to the pressure washer.

Check Stock

Kegerator Tower Insulator for Beer Tower - Neoprene Design - Perfect Fit for Kegerator Tap Tower - Easy to Use Beer Tower Cooler Accessory (3.0\ Diameter Beer Tower)

MAINTAINS ICY COLD BEER TOWERS: Upgrade your beer dispenser with this simple to use Neoprene kegerator tower insulation sleeve. Ensure that every pour from your draft beer tower comes out icy cold. Even the first!.
END FOAM NOW: Maintain a constant temperature throughout your kegerator system with a Keg Tower Insulator. Beer warms rapidly as it travels through a poorly insulated beer tower. Our product reduces foamy pours and wasted beer..
SAVE ELECTRICITY WITH LITTLE EFFORT: The added insulation of a Keg Tower Insulator will reduce kegerator energy consumption. Unlike kegerator tower cooler chiller fans, our product takes only seconds to install..
MINIMIZE CONDENSATION: Kegerator towers sweat. Condensation buildup is a sign of poor insulation and will lead to corrosion and rust. Increase the lifetime of your kegerator with a beer tower cover..
HIGH QUALITY MATERIAL AND BUILD: Crafted from high quality Neoprene with heavy-duty double stitching. Easy to clean and guaranteed to last. 3” Diameter and 11.5” Height. Ideal for double tap beer towers..

Check Stock

QMINOX 2 Inch × 1.5 Inch Sanitary Fitting End Cap Reducer Stainless Steel 304 Sanitary Concentric Reducer Tri Clamp Clover

End Cap Reducer Ferrule Size 64mm = 2 Inch Tri Clamp.
End Cap Reducer Ferrule Size 50.5mm = 1.5 Inch Tri Clamp.
Concentric End Cap Reducer Fitting to Connect 2 Pipes of Different Diameters That are Along The Same Pipe Axis.
Sanitary Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
Stainless Steel 304 Sanitary Fitting for Resistance to Corrosion and High Temperatures.

Check Stock

Oatey 43551 Replacement Ring, for Use with 4 in Closet Flanges, 3-Inch or 4-Inch, Brass

3 countersunk holes and 3 closet bolt slots for secure attachment to the floor.
3-Inch Spigot Closet Flange fits inside the hub end of 3-Inch Schedule 40 DWV fitting.
4-Inch Spigot Closet Flange fits inside the hub end of 4-Inch Schedule 40 DWV fitting.
Solvent weld into fitting-short throat length is perfect for use in tight spaces and where the fitting is close to the sub-floor.
Four mounting slots for proper fit and alignment of closet bolts to the toilet.

Check Stock

Hose Adapter, WarmSpray RV Dump Hose Attachment for Faucet, Garden/Sink/Bath Faucet Water Hose Bib

Universal Fit: Quickly connect to most standard hoses with our hose connector.
Highly flexible, silicone polymer sleeve stretches about 1.5 inches，and the hose adapter works with damaged or stripped faucet threads and even faucets with no threads at all..
Improved Expandable Depth Design: This hose-to-sink faucet adapter is 3.94 inches long and the available depth of the hose connector can reach nearly 2 inches, and perfect solution for preventing the hose connections leaking and blowing off from the faucet better..
Easy Installation: One black end connects to a standard water hose, via a male, standard water connection. The other end a highly flexible, silicone polymer sleeve stretches to fit over the end of virtually any standard water source. Simple and quick to install..
Works With Many Features: Connects to damaged or threadless faucets.
Improved expandable depth design to prevent leaks and blowing off from the faucet better.
Perfect for indoor and outdoor use (such as garden watering, car washing, pet cleaning, washing the floor and so on).
Quick and easy installation, this hose connector for RV can be easily slipp....

Check Stock

Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump

Adapts an aftermarket 1982-1988 T-Bird/Cougar type rack to a GM Type 1 Saginaw pump.
Pressure line has a 5/8"-18 male inverted flare fitting at the pump end.
Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting..
Features a -6AN to an 9/16"-18 O-ring fitting on the rack end.

Check Stock

iMopo 70 Pack Drip Irrigation Universal 1/4 Barbed End Plug Fittings Barbed Connectors for Drip or Sprinkler System

【Great Value】：Comes with 70 pieces barbed end plug fittings in total,enough to meet your daily use..
【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
【BARBED DESIGN】：Barbed end plug fittings tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
【EASY TO INSTALL】:Barbed end plug fitting is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
【FOR WIDE APPLICATIONS】:Barbed end plug fittings are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..

Check Stock

PWACCS Pressure Washer Hose for Power Washer – 3600 PSI Kink Resistant Pressure Washing Extension Hose 50 FT x 1/4\ – Universal Electric Power Wash Hose for Replacement – Compatible with M22 Fittings

UNIVERSAL FITTING — PWACCS power wash hose is suitable with most brands’ and models’ pressure washer accessories, for adopting standard M22 fitting craftmanship. A good choice as a replacement or extension part for your genuine hose..
SUPERIOR PERFORMANCE — Polyurethane outer jacket ensures pressure wash hose non-marking. Stains can be removed at ease and scratches cannot stay. At the same time, it is naturally resistant of dirt, corrosion, kink, wear or weather..
LIGHT WEIGHT — The apple-green hose for pressure washer is made of lightweight polyester braid, compared with traditional rubber-made hose, it is at least 50% lighter, make it more convenient to carry when outer-working..
LONG SERVICE LIFE — All benefits from high strength hybrid polymer material inside, this pressure washing hose will not easily blowout or leak even after hundreds of times work in daily life if only used under rated pressure (lower than 3600 PSI).
Protective case at both end can protect pressure hose from bending and guarantee a longer use time..
FULLY EQUIPPED — The package contains a 50 ft power washer hose and 5 adapters to deal with most cases. The coupler (M22 14mm Male to M22 14mm Male) is used for connecting two hoses. Other two adapter set (M22 14mm ....

Check Stock