ReviewsEnd Mills With Chipbreakers

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
Used for slotting and peripheral milling.

Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3\ Overall Length, 0.125\ Cutting Diameter, 0.125\ Shank Diameter

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Check Stock

YG-1 - 55901 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Check Stock

SpeTool CNC Router Bits Carving 8 Pcs Set for Wood Detail Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

The Carving bits kits of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
For CNC,Engraving machine.Carving Wood, plywood, MDF, plastics, acrylic, stainless steel, titanium alloy etc.
Long service life, Decreasing the times of changing cutters,Saving production time.
Include 3*carbide end mills ( 2 pc v-groove end mill, 1pcs tapered end mill ), 4*Spiral End Mill (3 pc up cut, 1 pc down cut), 1*ball end mill.
The Carbide End Mill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.

Check Stock

SpeTool CNC Router Bits Carving Set for Wood Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

The Carving router bit sets of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
For CNC,Engraving machine woodworking, Carving soft and hard wood, plywood, MDF, stainless steel, titanium alloy etc.
Long service life, Decreasing the times of changing cutters,Saving production time.
Include 2*carbide end mills ( 1 pc v-groove end mill, 1pcs tapered end mill ), 2*Spiral router bit (1 pc up cut, 1 pc down cut).
The Carbide End Mill Suit for CNC Router, xcarve and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.

Check Stock

Genmitsu 6pcs 3-Flute Square End Mill for Aluminum Applications, Nano Blue Coat CNC Router Bits, High Feed U-Type Design, for Roughing and Finishing, 1/4’’ Shank, SN06A

High Quality: The Genmitsu end mills are made of Tungsten Carbide Steel and 0.2um ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating provides high hardness and heat resistance enabling the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
Cost-Effective: Coming with 6pcs of the 3-Flute Square End Mill, Shank Diameter: 1/4’’ (6.35mm), Cutting Diameter: 5mm/6mm , Cutting Length: 15mm/20mm, Overall Length: 50mm/55mm..
Versatile: Surface finishes are greatly improved no matter if you are roughing or finishing due to effective chip removal.
Cut faster thanks to superior Material Removal Rate (MRR) especially when slotting..
Applicable Materials: High feed U-type design makes these cutters ideal for working with aluminum and copper alloy.
Attain excellent production rates thanks to the strong tooth with double relief angles..
Wide Compatibility: Genmitsu SN06A Square End Mills are compatible with most desktop CNC machin....

Check Stock

SHARS 1/4 X 1/2\ Cobalt Corner-Rounding END Mill 404-5851 P{

H.S.S. Corner Rounding End Mill Set Size from 1/16'' to 3/8'', 8 Pcs, 1011-0008.
1/2'', H.S.S. Corner Rounding End Mills, 3/4'', Shank Dia, 1-1/2'' Cutter Dia, 3-7/8'' Overall Length, 1011-1234.

Check Stock

Hakkin 20 Pcs Carbide Rotary Burrs Set, End Mill CNC Router Bit, 1/8\ Shank Nano Blue Coating Ball Nose End Mill, Double Cut Coat Rotary Drill for Die Grinder Woodworking, Engraving, Drilling, Carving

TUNGSTEN CARBIDE: These end mills are made from high quality tungsten carbide for good hardness ,so these milling cutters have sharp edge..
POLISHED AND TITANIUM COATED SURFACE: Well polished and titanium coated surface has a better anti-rust performance.surface is quite clean, neat, and there is no glitches or burrs on the shank..
SHARP: These CNC cutter router bits have sharp cutting edges, can be use for milling holes, grooves and edges on plates, smooth cutting..
10PCS/SET: There are 10pcs end mills in this set, great replacement for your drill tools..
HANDEL DIFFERENT MATERIAL: These milling cutters can be used to drill many items or materials, such as circuit boards, hardware parts, plastics, copper and stainless steel..

Check Stock

End Mill Set Metric CNC Milling Cutter Union Butterfield Tungsten 4 Fultes accupro Carbide Rotary Bits Tool Straight Shank 2-12mm 8pcs

◆2-12mm End Mill Set: This end mill set includes 8 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, satisfy your different needs..
◆End Milling Cutter Handle Design：Straight shank handle, rounded chamfer design for easy installation and improved work efficiency..
◆Excellent Carbide End Mill: Carbide end mills provide better rigidity and can be run faster. 4 flutes end mill produce a much finer finish than other flute tools, ideal for peripheral and finish milling..
◆Wide Application CNC End Mill：It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter..
◆Package Included：8 x 4 Flutes End Mill Cutter.

Check Stock

Jarrow Tool Square End Carbide Mill Set (Pack of 5) - 1/4 End Mill for Alloy Steels/Hardened Metals – 4 Flute TiAlN Coated Square Nose Milling Set for CNC Machine Milling Tools

A must-have for every machinist: square end mill are general purpose mills that create a sharp edge at the bottom of the slots and pockets of the workpiece. Jarrow Tool square mills are available in a pack of 5..

Check Stock