ReviewsEnder 3 Pro Glass Bed

Creality Ender CR Touch Auto Bed Leveling Sensor Kit, Upgrade Low Noise and More Durable Than BL Touch, for 3D Printer Ender 3 Ender 3 V2 Ender 3 Pro Ender 5 Ender 5 Pro

  • ...obe, 0-6mm extension length, 0.04mm repeat positioning accuracy, automatic leveling , can be reused more than 100,000 times..
  • 【Compatible Models】This kit includes 3 different mounting brackets and extension cables. You can install it easily, and it can be adapted to more Crealtiy 3D printers. CR Touch works with Ender 3/Ender 3 V2/Ender3 Pro/Ender 3 Max/Ender 3S/Ender 5/Ender 5 Pro/CR 10 V3/CR-10. It should be noted that it is only applicable to 32-bit V4.2.2/V4.2.7 motherboard 3D printers. This CR Touch does not work for 8-bit motherboards, please clarify what version your motherboard is before buying..
  • 【Easy Installation】First, choose the appropriate mounting bracket according to your printer, and install this CR Touch auto-leveling kit to your 3D printer. Download the CR Touch program from the Crealtiy official website and copy it to the TF/SD card. Insert it directly into the card slot of the 3D printer. Turn on the power, and the program can be updated intelligently after the power is turned on..
Check Stock

Creality Ender 3 S1 Pro 3D Printer with 300℃ High-Temp Nozzle, Sprite All Metal Direct Drive Extruder, PEI Bed and CR Touch Auto Leveling Print Size 8.6×8.6×10.6in, Upgraded Ender 3 S1

  • 300°C HIGH-TEMP PRINTING: Creality new 3D printer Ender-3 S1 Pro Print excellently with diverse filaments, such as PLA, ABS, WOOD, TPU, PETG, PA, etc..
  • “SPRITE” FULL-METAL DUAL-GEAR DIRECT EXTRUDER: the new upgraded direct extruder of the Creality 3D Printer Ender-3 S1 Pro comes with the pushing force up to 80N, the extruder realises smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments like TPU..
  • CR TOUCH AUTO LEVEL SENSOR: CR Touch can completely quickly adjust the nozzle printing height on the hot bed. CR-Touch gets the 16-points auto-levelling program, which can collect more samples than the 9-points of the BLTouch which makes the bed levelling more precise..
  • HIGHER PRINTING PRECISION AND EASY TO USE: Also like Ender 3 S1, Ender3 S1 Pro also has Z-axis dual-screw + Z-axis dual motor design. This can make Ender 3S1 Pro works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality. You can also quickly install the printers with 6 steps..
Check Stock

Ceality Glass Bed for CR-10S Pro, CR-X, CR-10 V2, Ender-3 Max, 310x320x4mm, Official Version Build Surface

  • No Edge Curling - Official printer glass bed offered by Creality, its microporous coating on the upper surface can adsorb the model to glass bed surface, no worry of print edges curling..
  • Universal Application - This printer glass plate is well suited for most types of filament including: PLA, ABS, PETG, Nylon, TPU, Polycarbonate, wood and more..
  • Excellent Flatness - Improved borosilicate glass plate provides more flat and more smooth build surface than magnetic mat or pei sheet, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed.
  • This glass bed could be fixed with middle sized clips and wash with alcohol or acetone at room temperature..
  • Compatibility - This printer parts is only applicable with Creality printers as following, CR-10S Pro, CR-10S Pro V2, CR-X, CR-X Pro, CR-10 V2, CR-10 V3 and Ender-3 Max, pls confirm if this glass print bed compatible with your printer..
Check Stock

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

  • ...d level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..
  • Easy to Assemble— Our ender 3 extruder and 1 meter capricorn tubing includes all the necessary screws & parts needed, it can directly replace your old original fragile plastic extruder. You can assemble it quickly by viewing the assembly diagram..
  • Wide Compatibility – The Creality ender 3 upgrades kit can used on other creality 3d printers, like CR-10/ CR-10S / CR-10S Pro/ CR-6SE/ Ender 3 / Ender 3 Pro /Ender 5 / Ender 5 Pro/ Ender 5 Plus/ Ender 6/ Ender-7..
Check Stock

3D Printer Creality Ender 3 v2 Neo New Upgrade Version with Auto-Leveling CR-Touch Stainless Platform Full-Metal Extruder 95% Pre-Installed Resume Printing 220x220x250mm

  • 【Upgraded Version】Pre-installed Ender-3 V2 Neo printer only 3 steps assembly requires. Friendly to users in the first step. 4.3 Inch UI user....
  • 【CR Touch Auto Bed Leveling】Upgraded CR Touch 16-point automatic bed leveling technology is more stable than the traditional BL touch leveling....
  • 【Full-metal Extruder】Different from Creality Ender 3 V2 3d printer, Ender-3 V2 Neo comes with the upgrade metal Bowden extruder, more durable,....
  • 【PC Spring Steel Platform】Different from ender 3, ender 3 pro, and ender 3 v2, this new-released FDM Ender 3 v2 Neo 3d printer comes with a....
  • 【Silent Motherboard】Ender-3 V2 Neo is equipped with the silent motherboard, which has stronger anti-interference, faster and more stable motion....
Check Stock

GO-3D PRINT 235mm x 235mm Borosilicate Glass Plate for Creality Ender 3 Pro 3 Ender 5 3D Printer

  • To print with ABS or PLA, lightly spray the surface of the glass with AquaNet hairspray, then install the glass..
  • Borosilicate Glass Plate, Compatibility: Compatible with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3X, Ender 5.
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

Official Creality Ender 3 V2 Neo 3D Printer with CR Touch Auto Leveling Kit PC Spring Steel Platform Full-Metal Extruder 95% Pre-Installed 3D Printers with Resume Printing and Model Preview Function

  • 1.Easy Assembly: Compared to Ender-3 V2, this Ender-3 V2 Neo printer is pre-installed, and the assembly requires only 3 steps. Friendly enough to....
  • 2.CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you in the trouble of manual leveling. Easy to use,....
  • 3.Brand New 4.3 Inch UI User Interface: The upgraded UI adds a model preview function, making it easier to observe the printing shape and progress for....
  • 4.PC spring steel magnetic build plate: Different from ender 3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC....
  • 5.Silent Motherboard: The mainboard is 4.2.2 version but it is silent mainboard which is different from ender 3 mainboard. This Ender-3 V2 Neo....
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

5PCS Creality 3D Printer NTC Thermistor 100K NTC 3950 100K ohm Thermistor Temp Sensor for Creality Ender 3/Ender 3 Pro/Ender 3 Neo/Voxelab Aquila XH2.54-2P Connector 1m/39.4inch

  • Wire Length: 45.27-46.85inch /1.15-1.19m. Package includes 5 thermistors..
  • Note: Not fit for Ender 3 V2/Ender 3 MAX/Ender-3 Max Neo/CR-10S Pro V2/CR-10S Pro/Ender 2 Pro/Ender 6/Prusa i3 3D Printer. Please measure the length of your 3d printer's thermistor and confirm whether this thermistor is compatible with yours before buying..
  • After-sales Service: If you have any unsolvable problems during using this product, please feel free to contact us. Our after-sales technical team will provide you with detailed solutions within 24 hours..
Check Stock

WINSINN 40mm RGB Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans LED Colorful 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of Pcs)

  • ✔️WINSINN 40mm RGB fan which micro size and lightweight design, fast and stable cooling, colorful when it works, bringing you unparalleled experience. So many 3D Printer and DIY enthusiasts are full of praise for it, and it will also be your best choice. The working voltage is 24V, which perfectly compatible a various 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place..
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.05A, Power: 1.2W, Speed: 5000PRM, Air Pressure: 2.31mmH₂O, Airflow: 5.56CFM, Noise: 22.6dBA.
  • ✔️WINSINN 40mm RGB fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️Packing List: 4 x 40mm RGB Fan 24v, Connector & Line length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
Check Stock