ReviewsEnder Inciarte Jersey

The 3d Printer in Action

✔️【Suitable for Printers with 32bit mother board】This auto-leveling sensor kit fits for Creality Ender3 v2/Ender3/Ender3 Pro/Ender5/Ender5....
✔️【High Precision】The technical chip is Creality self-developed based on hundreds of millions of our user's data. 0.04mm high positioning....
✔️【Easy to Install, Easy to Use】1. Download the CRTouch firmware from the official website of Creality.
2. Move to a formatted SD card without....
✔️【More Durable than BL Touch】Compared with traditional BLTouch or 3D Touch, CR-touch adopts metal probe protected by silicone case, which....
✔️【Strong Compatibility】CR Touch is compatible with variety of printing surface materials, such as PEI, Stickers, Glass, Metal and Wood etc.....

Check Stock

HICTOP Ender 3 pro Upgrades Glass Bed Double Sided Upgraded Tempered Glass Bed 235x235 for Ender 3 Ender 3 Pro Ender 5 CR-20 Pro 3D Printer (235 * 235)

HICTOP Ender 3 pro glass bed is coated on both sides and both sides can be used. Buying one plate gets you two usable sides, doubling your value.
Excellent adhesion when the temperature of the heated bed is about 50℃, you can print directly on the HICTOP glass bed without using any glue or other tools to help the model to stick on to the bed. You do not need to worry about the prints curling if the temperature of the hot bed is no less than 50℃.
It is super easy to remove the models when the temperature of the glass goes back to room temperature, you do not need to use removal tools even if you are printing big model on our HICTOP glass bed. Please do not try to remove the model before the plate cools to room temperature.
The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it can work with Creality 3D printers such as the Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and other similarly sized printers.
The surface of HICTOP glass bed is smooth without ripples, and there is no residue after the model is removed, it is also more durable than a superplate surface.

Check Stock

Official Creality Bowden Tube 1M, 3D Printer PTFE Tube Teflon Bowden Tubing Upgrades for 1.75mm Filament Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/CR 10 Series (1M)

【Best Performance】 Creality Bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend..
【Compatible with More Filaments】 PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃..
【Product Parameter】Teflon tube length: 1 Meter, Inner Diameter: 1.95mm ± 0.05mm , Outer Diameter: 2mm. The optimal inner diameter size is designed to reduce "wiggle room" or flex in the tube, allowing you to print flexible filaments even on the longest Bowden systems..
【Highly Compatible】 Compatible with Creality 3D printer:Ender-3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender-5/Ender 5 Pro/Ender 5 Plus/ Ender-6/CR-10/CR-10S/CR-10 V2/CR-10 V3/CR-10 S4/CR-10 S5..
【Technical Support】Creality pays great attention to the buyer’s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours..

Check Stock

Official Creality Ender 3 V2 Neo 3D Printer with CR Touch Auto Leveling Kit PC Spring Steel Platform Full-Metal Extruder 95% Pre-Installed 3D Printers with Resume Printing and Model Preview Function

1.Easy Assembly: Compared to Ender-3 V2, this Ender-3 V2 Neo printer is pre-installed, and the assembly requires only 3 steps. Friendly enough to....
2.CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you in the trouble of manual leveling. Easy to use,....
3.Brand New 4.3 Inch UI User Interface: The upgraded UI adds a model preview function, making it easier to observe the printing shape and progress for....
4.PC spring steel magnetic build plate: Different from ender 3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC....
5.Silent Motherboard: The mainboard is 4.2.2 version but it is silent mainboard which is different from ender 3 mainboard. This Ender-3 V2 Neo....

Check Stock

QWORK Auto Bed Leveling Sensor Kit 3D Printer Touch-Sensor for Ender 3/3S/V2 Ender 5/Pro/CR-10

Compatible: This 3D touch fits for Ender3 v2/Ender3/Ender3/Ender5/Ender5 Pro/CR-10 etc..
Function: The 3D Touch auto leveling sensor makes machine leveling printing easier..
Feature: Smart, High-precision, Small Error..
Fits: It can work with any kinds of bed materials, such as glasses, woods, metals, and so on..
Parameter: Working Voltage-5V, Max current-500mA..

Check Stock

UniTak3D Ender 3 Direct Drive Upgrade Kit Conversion Bracket Compatible with Creality Ender 3 V2,Ender 3 Pro and Voxelab Aquila 3D Printer Dual Gear Extruder&Bowden Extruder

【Application】:The direct drive upgrade kit is suitable for Ender 3 V2,Ender 3 Pro,Ender 3,Voxelab Aquila 3D printers,NOT compatible with Ender 3 Max,Ender 3 Neo,Ender 3 V2 Neo,NOT compatible with TITAN extruder..
【Outstanding Extrusion Control】:A direct drive extruder improves extrusion and retraction by removing the need for the Bowden (PTFE) tube. It provides precise retraction and a better print result..
【Stable Operation】:The holes of the Split Type conversion bracket are perfectly aligned, with supports on both sides to keep the center of gravity in the middle, and the structure is more stable..
【Flexible Filament Supported】: Compared with bowden extrusion,this direct drive extrusion greatly improves print quality of TPU and other flexible materials..
【Easy Installation】:No X,Y or Z-axis build volume lost. No firmware or wiring modification.Just tear down the original Ender 3 series plate and mount this direct drive upgrade kit..

Check Stock

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

...d level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..
Easy to Assemble— Our ender 3 extruder and 1 meter capricorn tubing includes all the necessary screws & parts needed, it can directly replace your old original fragile plastic extruder. You can assemble it quickly by viewing the assembly diagram..
Wide Compatibility – The Creality ender 3 upgrades kit can used on other creality 3d printers, like CR-10/ CR-10S / CR-10S Pro/ CR-6SE/ Ender 3 / Ender 3 Pro /Ender 5 / Ender 5 Pro/ Ender 5 Plus/ Ender 6/ Ender-7..

Check Stock

HICTOP Upgraded New Version Ender 3 pro Glass Bed One Side Tempered Glass Bed 235x235 for Ender 3 Ender 3 Pro Ender 5 CR-20 Pro 3D Printer (235 * 235)

HICTOP Ender 3 pro glass bed is coated on one side and the coat material is better than the both sides one, it is much more stable and not easy to remove. We can send you new one for free if it peels off in 3 monthes.
Excellent adhesion when the temperature of the heated bed is about 50℃, you can print directly on the HICTOP glass bed without using any glue or other tools to help the model to stick on to the bed. You do not need to worry about the prints curling if the temperature of the hot bed is no less than 50℃.
It is super easy to remove the models when the temperature of the glass goes back to room temperature, you do not need to use removal tools even if you are printing big model on our HICTOP glass bed. Please do not try to remove the model before the plate cools to room temperature..
The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it can work with Creality 3D printers such as the Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and other similarly sized printers..
The surface of HICTOP glass bed is smooth without ripples, and there is no residue after the model is removed, it is also more durable than a super plate surface..

Check Stock

25PCS MK8 Ender 3 V2 Nozzles 0.4MM, 3D Printer Brass Hotend Nozzles with DIY Tools Storage Box for Creality Ender 3/Ender 3 Pro/Ender 3 Max/Ender 5 Pro, Ender 3 S1/Ender 3 Neo/CR 10 Series 3D Printer

High Precision - Input diameter 1.75mm, smooth inner wall, extruder nozzle diameter error less than 0.02 mm.Greatly reduces the risk of print head leaks and avoids nozzle clogging..
Wide Compatibility - Suitable for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5 Pro/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo and CR 10 Series 3D printers.Compatible with all 1.75mm PLA ABS filament 3D printers..

Check Stock

BIGTREETECH SKR Pro v1.2 32-bit Motherboard high-Frequency 3D Printer Control Board Support TMC5160 TMC2208 TMC2130 TFT28 TFT32 TFT35 12864LCD ect.

Super Quiet. Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5 3D printer. PLEASE NOTICE: It only plug and play for Ender-3 & Ender 3....
Driver - TMC2225 driver & Creality V0.0.6 firmware ( based on Marlin 2.0.1) for V4.2.7 board. Bootloader has been preinstalled..
Update Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord.....
Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem..
Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical....

Check Stock

Creality PLA Filament Pro Grey, 1.75mm 3D Printer Filament, Ender PLA + (Plus) Printing Filament, 1kg(2.2lbs)/Spool, Dimensional Accuracy ±0.03mm. Fit Most FDM Printer

BUBBLE FREE: Creality 3D printer filament Pro vacuum sealed with desiccants in a transparent bag..
STRONGER TOUGHNESS: Toughness enhancement,Stable spool less-tangle, Make printing smoother..
SIZE ACCURACY: Filament accuracy is 1.75mm ±0.03 mm, 1 kg (2.2 pounds).strict quality control make a reassuring printing experience..
BEGINNER & EXPERT FRIENDLY: Creality 3D Printing Filaments making it easy for novice users to get started with basic settings. Seasoned printers can push their designs to the limit without worrying about purity, tolerance or printing issues..
WIDE COMPATIBILITY: Works ferfectly with most 3D printers on the market, Such as Ender 3, Ender 3 S1,Ender 3 pro,Ender 3v2, Ender 5 S1, Ender 5 pro, CR 6, A 8, CR 10..

Check Stock