ReviewsEnder Upgrades

Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board

Creality new release silent motherboard V4.2.7 ，32bit, compatible with Ender 3..
Super quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware..
Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem..
Firmware comes pre-installed, pre-configured for the Ender 3, makes it totally plug & play..
This silent mainboard preinstalls the Ender-3 firmware. If you want to install it in your Ender 3 Pro/Ender3 v2/ Ender-5, need to flash the Ender 3 Pro/Ender 3 v2/Ender5 firmware..

Check Stock

SainSmart Large 3D Printer Enclosure, 20.9'' x 24.2\ x 28.9\

Consistent Temperature: The SainSmart 3D Printer Enclosure reduces heat losses and prevents external factors that might alter your prints, keeping the printing area at a consistent temperature, delivering stable and smooth printing results..
Noise & Dust Reduction: A enclosure helps to reduce the annoying fan noise while printing, making it more viable for home and school use. It also protects your printers from dust..
Safe to Use: The lining of enclosure uses pure aluminum film material, equipped with stainless steel supports, stable structure and a large space. Folding storage, easy to install and carry..
Better organize your printing area: the enclosure is equipped with multiple tool pockets and holders on each side, keeping your printing area clean and tidy..
With a large area measuring 73.5cm x 61.5cm x 53cm (20.9'' x 24.2" x 28.9"), this enclosure is compatible with Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 V2 Neo, Ender-3 S1 Pro, Ender-3 Max, Ender-3 Max Neo, Ender-5 Pro, CR-6 SE, CR-10, CR-10 Smart Pro..

Check Stock

Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm

No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing..
Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model..
Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature..
Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..

Check Stock

ANYCUBIC Vyper 3D Printer Auto Bed Leveling 3th Gen Upgrade FDM Metal FDM 3D Printers with TMC2209 32-bit Silent Driver Fast 3D Printing Large Build Size 9.6 x 9.6 x 10.2 Easy Assembly

【After-sales Service】 Life-time professional technical supports,If you encounter unsolvable problems during installation and use, please feel free....
【Easy to Install and Use】The kit contains 3 different mounting brackets and extension cords. You can easily install.
【Product Durability】 Creality CR Touch is specially designed for 3d bed leveling for Creality 3d printers. Compared with BL Touch, it has stable....
【Creality ideal companion】CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro/Ender5 s/ CR 10 with 32 bit....
【Strong compatibility】CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed.

Check Stock

3D Printer Creality Ender 3 v2 Neo New Upgrade Version with Auto-Leveling CR-Touch Stainless Platform Full-Metal Extruder 95% Pre-Installed Resume Printing 220x220x250mm

【Upgraded Version】Pre-installed Ender-3 V2 Neo printer only 3 steps assembly requires. Friendly to users in the first step. 4.3 Inch UI user....
【CR Touch Auto Bed Leveling】Upgraded CR Touch 16-point automatic bed leveling technology is more stable than the traditional BL touch leveling....
【Full-metal Extruder】Different from Creality Ender 3 V2 3d printer, Ender-3 V2 Neo comes with the upgrade metal Bowden extruder, more durable,....
【PC Spring Steel Platform】Different from ender 3, ender 3 pro, and ender 3 v2, this new-released FDM Ender 3 v2 Neo 3d printer comes with a....
【Silent Motherboard】Ender-3 V2 Neo is equipped with the silent motherboard, which has stronger anti-interference, faster and more stable motion....

Check Stock

HICTOP Ender 3 Heater Cartridge 24V 40W for Creality Ender 3 Ender 3 Pro Ender 5 CR-10S Pro 3D Printer Prusa Mendel （Pack of 3）

ender 3 heater cartridge material : Stainless steel (304).
24V heater cartridge voltage and power : 24V/40W..
Application of the 24v heater cartridge 40W: Creality ender 3, ender 3 Pro, ender 6 CR-10S Pro etc. 3D Printers Prusa Mendel.
Diameter of the ender 3 pro heater cartridge : 6mm. Length: 20mm,Wire Length:1M.
Temperature of the ender 3 V2 heater cartridge: It can take up to 280 ° C.

Check Stock

Comgrow Textured/Smooth Double Sided PEI Sheet 235mmx235mm for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo/Voxelab Aquila 3D Printer

✔️ 【Simple Installation】✔️ The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, smooth PEI on the other side and a magnetic bottom sheet with adhesive on the back. Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top..
✔️ 【Excellent Adhesion】✔️ Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃..
✔️ 【Wide Application】✔️ We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120°C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and Polycarbonate!.
✔️【Easy Removal】✔️ This surface is easily removed and flexible. Prints come off the surface easily wh....

Check Stock

Creality Ender 3 Original Extruder Assembled MK8 Hot End Kit for Ender 3 3D Pinter with Aluminum Heating Block and 0.4mm Nozzle

Creality 100% original and brand new Hot End Kit for Creality Ender 3, Ender 3X, Ender 3 Pro..
Work with different sizes of MK8 nozzles: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzles..
MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V..
Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)..
Suitable For Creality Ender 3, Ender 3X, Ender 3 Pro..

Check Stock

Creality CR Touch Auto Bed Leveling Sensor Kit. Creality Official Specially Designed for Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5/Ender 5pro/CR10 for 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printer

【After-sales Service】 Life-time professional technical supports,If you encounter unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours..
【Easy to Install and Use】The kit contains 3 different mounting brackets and extension cords. You can easily install.
【Product Durability】 Creality CR Touch is specially designed for 3d bed leveling for Creality 3d printers. Compared with BL Touch, it has stable quality, long service life, and can be reused more than 100,000 times..
【Creality ideal companion】CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro/Ender5 s/ CR 10 with 32 bit motherboard.(3d printer accessory with the best experience).
【Strong compatibility】CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed.

Check Stock

Creality Spider All Metal Hotend Up to 500℃ High Temperature High Speed 3D Printer Extruder Hot end Kit Compatible with Ender 3 Ender 3 pro Ender 3v2 Ender 5/6/7 CR-10 Series

【 Up To 500℃ High Temperature Resistance, Compatible With Most Filaments】 With scientific structure and material selection, Creality Spider All....
【250mm/s High-Speed Printing, Save Your Time】The hotend heating block is mainly composed of copper alloy material which has the advantage of....
【No Clogging ,Smooth Extrusion】 With fluid polishing process, the Ra ≤ 0.3 roughness inner wall enhances fluidity of filament. Copper alloy....
【Simple Installation】Fix by screws or built-in joints, installation is a breeze. This 3D printer hotend kit includes Spider Hotend*1,....
【Wide Compatibility】Creality Spider hotend Fits for Ender 3,Ender 3 Pro,Ender3v2, Ender 5, Ender 2, Ender 6, Ender 7, Creality CR-10 ,CR-10S....

Check Stock

Creality Ender CR Touch Auto Bed Leveling Sensor Kit Compatible with Ender 3 V2/Ender 3 Pro/Ender 3/Ender 3 Max/Ender 5/Ender 5Pro with 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printer

【Upgrade Independent development】CR Touch is upgraded to a metal probe, Exquisite exterior design，Positioning accuracy ≤0.04mm , Automatic....
【Easy to install and easy to use】Download the CR Touch program from the Creative official website and copy it to the TF/SD card. Insert it....
【Widely Application】The kit contains 3 different mounting brackets and extension cords. You can easily install.
【Strong compatibility】CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed.
【Creality ideal companion】CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro with 32 bit motherboard.(Don't work....

Check Stock