ReviewsEndotracheal Tube Holder

Innovative Tip Down (for 2019 (3 Pack, Orange)

  • ... tube, which holds the rod and base. The rod, which is 20" long. It’s stiff, but still bends for superior hooking. The base, which supports the Tip-Down, harnesses the rod, and screws into the storage tube..
  • THE STORAGE TUBE IS HARD PLASTIC. It has an extendable rod holder that can be set as high as 36" or as low as 24". The extendable holder has a lanyard for easily pulling the holder out of the tube and for easy handling when moving the set-up. It slides up and down easily but will never slip. The pivot pin of the rod sits in the holder’s upper notches..
  • THE ROD IS 20" and has line guides including a special line guide just above the reel to prevent spool tangles. The reel has a folding handle for easily reeling in your line and lure. Each reel can handle over 100 feet of line. When a fish strikes, the rod goes down and stays down as long as the fish is on. If the fish lets go, the rod will come back up. If the rod tips down to it's maximum position, the fish can freely take line out..
  • THE BASE FETURES FOUR ROTATING LEGS that support the tip-down on the ice. Folding the legs in creates a harne....
Check Stock

Marvis Classic Strong Mint and Cinnamon Mint Toothpaste Set, 3.8 oz

  • Toothpaste holder: simple and incredibly stylish, our tube holder. Colour: blue.
  • Perfect match with our 85 ml toothcreams: the MARVIS tube holder is the perfect storage space for your toothpaste..
  • The pure dental care pleasure: use the Marvis in your daily care routine..
  • The iconic dental care from Italy: progressive, traditional and attractive – the MARVIS dental care products come from Florence and are 100% made in Italy..
Check Stock

MILE Test Tube Rack,Centrifuge Tube Holder 2 Pack - Blue for 16mm Detachable Plastic Stand,50 Well 0

  • Test Tube Holder:3 Layer Plastic Centrifuge Tube Holder With Carrying Handle On Both Sides,Easy To Disassemble.
  • Lab Tube Racks:3 Layer Design Permits You To Insert And Fetch Tubes,Easy To Carry..
Check Stock

6 Pack Plastic Test Tube Rack for 15-18 mm Tubes, 40 Holes Test Tube Rack Holder, Science Test Tube Stand, Lab Tube Rack for for Scientific Experiment, Lab Sample Vials, Laboratory (Detachable)

  • Package Content: You will get valued 6 pack 10 x 4.3 x 2.6 inch (L x W x H) lab test tube bracket holders with 40 holes, and the hole diameter measures 18mm/0.71”which suitable for test tubes with an OD ranging from 15 to 18 mm.
  • Wide Application: The test tube rack set are perfect for scientific experiment, holding test tube.
  • You can also apply the test tube holder rack for making homemade chapsticks, storing ink samples, lip balm, candy storage or party decor.
  • Quality Material: The lab tube rack made of lab grade polystyrene, durable and lightweight.
  • The detachable plastic test tube rack allows easy to carry.
  • Detachable Test Tube Rack: Our plastic test tube organizer adopt detachable, removable design allows better store and doesn't take up much space.
  • These detachable test tube stand ideal for storing and holding seed beads, allow you to find what you need quickly.
  • Easy to Assemble: The plastic test tube holder has 3 layer and each layer has a direction, just slide the shelves in from one side and the other side has a lip that stops it.
  • The clear test tube rack has three layers of holes with a smallest hole at the bottom to keep tubes steady.
Check Stock

KAVIL Feeding Tube Pad G Tubes Button Pads Holder Covers Peg Tube Supplies Catheter Support Peritoneal Abdominal Dialysis Extra Soft And Absorbent Pads 12 Pack

  • G tube Button Pads: Made of high quality material which is soft, skin friendly, breathable and moisture absorption and reduce skin friction. Plastic button easy to snap and unsnap..
  • Absorbent and Washable：G tube pads are very absorbent. Great for absorbing formula and stomach fluids and help to prevent and eliminate granulation. They are washable and reuse..
  • Convenience and Confidence : Great tube pads for babies and adults. Provides a comfortable way to cover catheter in place,can be invisible placed under clothes, keeps the tube and belt hidden, maintains dignity of catheterized residents..
  • G-Tube Holder : This g tube pads are designed to hold PEG tubes, g-tubes, jejunostomy tube, catheters or other abdominal feedings tubes without using adhesive tape or pins. Protects the area of insertion from pulls,keeps it clean and reduce skin irritation and hair pulling..
  • Any Time Any Where：This catheter holder pads are ideal for going out, travel, by car, sleep, daily working..
Check Stock

5pcs Spring Steel Test Tube Clip Clamp Labs with Finger Grips Stoddard Laboratory Experiment Testing Holder Tool,14.5cm / 5.7inch

  • Quality plated steel wire test tube holder, exquisite workmanship, not easy to rust..
  • Finger grips make use comfortable and secure,It can protect your hand when doing a experiment..
  • A spring-action self-closing mechanism to ensure a safe hold with correct pressure..
  • The maximum diameter test tube that can hold is less than 5 cm. Fit for: 5-40mm tube..
  • The test tube holder is used to hold test tubes when they are hot and untouchable..
Check Stock

Innovative Tip Down (Orange - Your Next All-in-One Ice Fishing Set Up (2-Pack)

  • ... tube, which holds the rod and base. The rod, which is 20" long. It’s stiff, but still bends for superior hooking. The base, which supports the Tip-Down, harnesses the rod, and screws into the storage tube..
  • THE STORAGE TUBE IS HARD PLASTIC. It has an extendable rod holder that can be set as high as 36" or as low as 24". The extendable holder has a lanyard for easily pulling the holder out of the tube and for easy handling when moving the set-up. It slides up and down easily but will never slip. The pivot pin of the rod sits in the holder’s upper notches..
  • THE ROD IS 20" and has line guides including a special line guide just above the reel to prevent spool tangles. The reel has a folding handle for easily reeling in your line and lure. Each reel can handle over 100 feet of line. When a fish strikes, the rod goes down and stays down as long as the fish is on. If the fish lets go, the rod will come back up. If the rod tips down to it's maximum position, the fish can freely take line out..
  • THE BASE FEATURES FOUR ROTATING LEGS that support the tip-down on the ice. Folding the legs in creates a harn....
Check Stock

Curaplex Air Cushion BVM Masks, Latex Free, Adult Size

  • Includes two inner cannulae, cleaning brush and tube holder.
  • Available with an Amazon Business Account and Healthcare License.
Check Stock

All Fired Up (DreamMakers Book 1)

  • RGB BACKLIT LIGHT: RGB rolling subtitles light make it look very cool and Suitable for Most Headphone.God said, "Let there be light," and there was light..
  • STURDY AND NON-SLIP:Connecting rod made of aluminum tube provides a stable and safe foundation for your headphone. Thick rubber base avoids PC headphone stand to slip. Note: The headphone is not included..
  • EASY TO ASSEMBLE:Aluminum alloy tube to connect headphone holder and base,Connect the cable to the USB port of the PC,Plug and play..
  • SIZE AND WIDE USE: RGB Headset stand featuring 10.5 inches standing height, Perfect for supports all size headphones including Bose, Beats, Sony, Panasonic, AKG, JBL, Audio-Technica, Sennheiser, Shure and more.Great PC headset holder for your headphone and saving desk space..
  • Headphone stand without light?? Worried about hitting a child with the hook-type headphone holder?Don’t need USB port headphone holder?This item is a good choice,100% test before shipping. Buy it without worry..
Check Stock

2PCS Stainless Steel Outrigger Fishing Rod Holder for Marine Boat Yacht

  • Made of 316 Stainless Steel, mirror polished, which must be perfect for your boat. PVC liner protects your fishing rod.
  • 24" nylon rod safety strap & 316 Stainless quick release reel clip.
  • Straps are used to strap the rod holders down and can also be used as safety straps to secure your rod so it down bounce out or get pulled out of the rod holder.
  • Perfect for the fisherman not quite ready for regular outriggers. Heavy duty, easy to stow.
  • Rod holder tube has a 20° up angle from the water. 15.5" tall & 1-1/2" OD gunnel mount tube & 2" Rod holder In.Diameter.
Check Stock

Amarine Made Silver Highly Polished Stainless Steel Outrigger Stylish Rod Holder

  • Mirror polished stainless steel construction..
  • 24" nylon rod safety strap & 316L Stainless quick release reel clip.
  • Rod holder tube has a 20° up angle from the water. 14" tall & 1-1/2" OD gunnel rod holder mount tube.
  • Increases trolling spread. Strong, stylish and functional..
Check Stock