ReviewsEnduring Machinery

uxcell R18 10mm x 20mm Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC

  • Internal Size: 10x20mm(0.394x0.787 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

Heyiarbeit 10x11mm Plastic Cable Wire Carrier Drag Chain 1M R28 with End Connectors Open Type for Electrical Machines CNC Black 1Pcs

  • Size: 10mm x 11mm/0.39" X 0.43"(Inner H x Outer W).
  • 【CUSTOM LENGTH】- You can change the length you need by connecting multiple drag chains or splitting a single drag chain.
  • 【FEATURE】- The appearance of this cable carrier chain is beautiful,and surface gloss.
  • Reinforced nylon, reduces the noise of the cable chain while moving, while increasing wear resistance.
  • Our drag chain is resistant to low temperature, wear and corrosion.
  • 【ADVANTAGE】- Drag chain is designed to surround and guide flexible electrical cables and hydraulic or pneumatic hoses connected to moving automated machinery, they reduce wear and stress on cables and hoses, prevent entanglement.
  • The cable drag chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement.
  • 【APPLICATION】- The drag chain suitable for a variety of automation equipment, such as CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
Check Stock

Heyiarbeit 35x100mm Plastic Cable Wire Carrier Drag Chain 1M R100 with End Connectors Open Type for Electrical Machines CNC Black 1Pcs

  • Size: 35mm x 100mm/1.38" X 3.94"(Inner H x Outer W).
  • 【CUSTOM LENGTH】- You can change the length you need by connecting multiple drag chains or splitting a single drag chain.
  • 【FEATURE】- The appearance of this cable carrier chain is beautiful,and surface gloss.
  • Reinforced nylon, reduces the noise of the cable chain while moving, while increasing wear resistance.
  • Our drag chain is resistant to low temperature, wear and corrosion.
  • 【ADVANTAGE】- Drag chain is designed to surround and guide flexible electrical cables and hydraulic or pneumatic hoses connected to moving automated machinery, they reduce wear and stress on cables and hoses, prevent entanglement.
  • The cable drag chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement.
  • 【APPLICATION】- The drag chain suitable for a variety of automation equipment, such as CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
Check Stock

10mm x 10mm Length 1M Black Plastic Open Type Cable Wire Carrier Drag Chain Towline R18 for 3D Printer and CNC Machines

  • The Cable Drag Chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement.
  • You can link the cables with each other to form one long length you need.
  • Surface gloss,Low temperature resistance, wear resistance and corrosion resistance.
  • Suitable for reciprocating motion in occasions, with built-in cables, pipes, water pipes, etc.
  • The Drag chain has been widely used in CNC machine tools,electronic equipments, fire machinery, stone machinery, glass machinery, doors and windows machinery, counting devices, electrical machines, etc.
Check Stock

uxcell R28 15mm x 15mm Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC 1 Hole

  • External Size: 20x23mm(0.787x0.906 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

RCH Hardware CH-S56-11S-BLK-10 |9 Gauge Decorative Solid Steel Standard Link Fixture Chain | 10 Foot Increments | Black Finish

  • EASY TO INSTALL - The Cable Drag Chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement..
  • FEATURES - High wear resistance, high temperature resistance, salt resistance, acid resistance and alkali resistance.Due to the small spacing, the operation is particularly quiet and the noise is low..
  • APPLICATION - Widely used in 3D printers, CNC machine tools, electronic equipment, fire fighting machinery, stone machinery, glass machinery, door and window machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses, etc..
  • FAST MOVING SPEED - Very suitable for short distance light bearing condition.
Check Stock

IF Book Keepers Personalised Bookmark - Letter K

  • Decorative detailing and cast in brass, this unique bookmark has a superior quality finish.
  • Antiqued finish gives this bookmark an enduring appeal for book lovers of all ages.
  • The waxed cotton cord keeps your page securely until you return to your book, leaving the letter and key dangling from the pages.
  • not just a great book mark but a lovely book accessory too!.
  • A bookmark that stands the test of time with its vintage styling and enduring usefulness.
Check Stock

Brass Oil Distributor 5\\/6 Way Adjustable Lube Oil Piston Distributor Value Manifold Block for Centralized Lubrication System(1 in 5 out)

  • ☛【Oil Volume Outlet Can Be Adjusted】The oil volume of each oil outlet can be adjusted to meet the needs of various working scenarios.
  • ☛【Easy To Adjust And Distribute 】The oil separator has a simple and compact structure, and is easy to adjust and distribute evenly.
  • ☛【Wear Resistance And Durable】Using high‑quality brass material, the oil distributor possesses good wear resistance and is durable.
  • ☛【Good Product Performance】Good production technology and air tightness ensure good product performance.
  • ☛【Applicable Widely】 The product is applicable to CNC machining center machinery, production lines and machine tools, forging machinery, die-casting machinery, woodworking machinery and other mechanical equipment lubrication systems.
Check Stock

uxcell R28 15mm x 40mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • Internal Size: 15x40mm(0.59x1.574 inch)(InnerH*InnerW).
  • External Size: 20x49mm(0.787x1.929 inch)(OuterH*OuterW).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

uxcell R28 15mm x 20mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • Internal Size: 15x20mm /0.59"x0.787" (InnerH*InnerW).
  • External Size: 20x28mm/0.787"x1.1"(OuterH*OuterW)Bending radius: R28.
  • Change Size: You could link the cables with each other to form one long length you need..
  • Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

Tie Down Engineering Dock Hardware - Angle Brackets/Clip

  • The bracket holder is injection molded hard plastic with countersunk screw hole for firm installation.
  • Unique three-connect stent fixed design, can fix three electric machinery once, placed beautiful.
  • Easy to fix electric machinery / tools and on the table and wall, clean and tidy.
  • Suitable for the fixing of for 14.4V/18V/60V electric machinery at the same time, perfectly match.
  • Adopt good‑quality ABS material, possess impact resistance, scratch resistance, environmental protection.
Check Stock