ReviewsEngine Block Heater Cord

Zerostart 310-0046 Engine Block Heater

• Warm engines produce significantly fewer emissions.
• Provides for quicker vehicle cabin heater output.
• Extends life of engine and starter system components.
• Zerostart works directly with OEM engine and vehicle manufacturers to design Engine Block Heaters for their specific applications.

Zerostart 860-1860 Engine Block Heater

• Warm engines produce significantly fewer emissions.
• Provides for quicker vehicle cabin heater output.
• Extends life of engine and starter system components.
• Zerostart works directly with OEM engine and vehicle manufacturers to design Engine Block Heaters for their specific applications.

Car Engine Heater Pad 120V 150W 4x5 Inches 2 Pcs Universal Battery Silicone Heater Pad Engine Block Heater Pad Oil Pan Heater Pad with Thermal Protector

• Keep the Engine Warm: In cold winters, use the silicone heating pad 10-15 minutes before starting the engine to bring the oil to a suitable temperature, thereby reducing the consistency of the oil, better lubricating the engine and reducing wear, extending the engine and gearbox life.
• Constant Temperature Control: silicone heat pad rated power 120 volts, 150 watts, built-in automatic thermal protector can keep the heating temperature constant at about 194°F (90°C), effectively preventing safety hazards caused by high temperature.
• Easy to Use: tear off the paper on the back of the car engine heater pad, stick it on a clean metal surface, and plug the power cord into the socket. Once the silicon heat pad is attached, it is unlikely to be removed.
• Excellent Material: The size of the heated silicone pad is 4 inches * 5 inches, and the power cord is about 68 inches. The heater pad is made of wear-resistant silicone, which is waterproof, oil-proof, low-temperature resistant, and durable enough to serve you for a long time.
• Adaptability: silicone heating pads are only suitable for automotive parts with metal appearance, such as oil pans, accumulators and gearbox plates. They are not designed for personal use or plastic.

Zerostart 3400085 Silicone Pad Heater Engine Oil, Transmission Fluid, Reservoir and Hydraulic Fluid Heater, 6\ (15 cm) x 10¾\ (27 cm) | CSA Approved | 240 Volts | 1000 Watts

• Most efficient and reliable way to pre-heat engine block. Operates by being directly submerged into coolant and heating the block. Applications are specific to part numbers. Also referred to as freeze plug heaters or block heaters. Installation requires mechanical ability..

JEENDA Pre Heater TPS101GT10-000 Engine Block Heater 1000W 120V 100-120 F

ENGINE OIL BLOCK HEATER Pan 3M stick on Pad (120V U.S.A. / Long CORD) Designed for: 4 Cylinder Engines by Z-TOOL HEATER TEC.

• Z-TOOL HEATER TEC. —— STICK TO CLEAN SURFACE OF OIL PAN ( See Pictures).
• Z-TOOL HEATER TEC. Cold weather to make sure your engine starts. Make starting faster and easier in cold weather. Provide heat to the cabin much faster. Reduce the wear on your engine during cold weather starts! They plug into a standard electrical outlet and can be put onto a timer, or a temperature triggered electrical outlet. This in effect causes your engine to reach operating temperature much faster and gives you heat inside the cabin much faster as well..
• On top of the benefit of heating up quicker, it also saves your engine a ton of wear and tear on internal moving parts! When an engine is warm it starts easier, when its cold it is very hard on your engine..
• Designed for: 2WD 4×4 AWD vehicles w/ 4 Cylinder Engines. Long 4.5 ft Cord.

JEENDA Engine Block Heater TPS151GT10-000 590-893 1500W 120V Option 100-120F Compatible with Generators Tractors Buses Trucks Boats Some Cars

• Part Number:TPS151GT10-000 590-893 590893 084918G.
• 1500 Watt 120 Volt 1500W 120V Option 100-120F.Inlet & Outlet Size : 16mm(0.629").
• Test before shipping to ensure product safety, stability and durability.100% Customer Satisfaction Guarantee.Free return or exchange within 30 days.
• Applications:Compatible with diesel and gas engines in genset, heavy duty mobile equipment, marine and industrial,trucks and some cars..

Feekoon Thermo Cube Thermostatically Controlled Outlet, Temperature Controller on at 15.8°F to 33.8°F, Cold Weather Temperature Controlled Outlet for Automotive Engine and Battery Heaters

• Energy Efficient Design: this temperature controlled outlet automatically turns power on and off based on the outside ambient air temperature, and converts a single outlet into a convenient dual outlet.
• Thermostatically Activated Switch: the temperature controller operates only when it is necessary.
• It turns on at 15.8 degrees Fahrenheit and off at 33.8 degrees Fahrenheit, giving you convenience to use it.
• Quality Material: made of quality ABS and PC, the thermostat controlled outlet is beautiful and reliable, sturdy and not easy to deform or break.
• Plug and Play: it is simple to plug into electrical outlet.
• Please remind that the outlets average reaction time is 5 minutes.
• Powerful Application: The thermostatic outlets is suitable for many places like car engine and battery heaters, car engine block heater, RVs, heat tape, pond de-icers, chicken farm, greenhouses, chicken coop heater, aquarium heater, shed/well house heater and so on..

Facon 5'' x 4'' Automotive Engine Block Heater Pad with 3M Self Adhesive and Thermostatically controlled, Battery Heater, Engine Oil Pan Heater Pad with 2-Prong Plug, Silicone Sealer Included

• [Heating Technology] Facon’s Heater Pads provide consistent & efficient protection as the first signs of freezing winter weather approach. Heater Pads are Designed and Engineered to heat fluids with any metal surface such as engine oil pan, fuel tank, reservoir, transmission pan, and more. Transmits heat continuously to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine..
• [Thermostat Controlled] Plug it into 120V AC Power 10 or 15 minutes prior to start up for perfect engine oil temperature, device heats the oil quickly for those cold start mornings. Built-in Thermostat is set to Turn Itself off at 190°F ( + - 10 degrees). Unplug before driving away.
• [Specification] Size: 5’’ x 4’’. 120V AC, 150Watt, with Plug: 72-inch (183cm) 2-prong power cord. Waterproof high heat transfer car heated pad. Constructed with silicone coat covering for oil resistance, acid resistance, and added strength and longevity.
• [Easy Installation] Clean the application surface, peel off the paper backing to adhesively attach this pad to any metal surface. Seal edges using the included weatherproof silicone sealer. Allow to dry before using heater. The silicone sealer keeps weather elements, dirt and debris away from the adhesive su....

Subaru 2014 to 2018 Subaru Forester 2014 to 2019 Outback Legacy OEM Engine Block Heater A091SSG000 Genuine new

• Genuine Subaru Engine Block Heater A091SSG000.
• 2015-2019 Outback 2.5 2015-2019 Legacy 2.5.
• Warms engine coolant to promote easier starting in extreme cold. Plugs into household electrical outlet.

Part# 11531705210 11531705220 Engine Heater Pipe & Coolant Water Pipe For B-M-W 3 5 7 Series X3 X5 Z3 Z4 320Ci 323Ci 328Ci 330Ci 325xi 330xi 520i 525i 530i

• Heater hoses are rubber hoses that circulate engine coolant to and from the heater core, which is the small radiator that provides heat for the cabin. The water pump sends coolant that’s been heated up by the engine to the heater core through the heater hoses. Heater hose runs from the water pump to the heater core, behind the firewall, and from the heater core back to the radiator. Without heater hoses, you’ve got no heat..
• Coolant Hose is typically a rubber device that manages the coolant flow from an engine’s water pump to the heater. Coolant hose is an essential cooling system in your engine, which would not work without them. Engines produce a lot of heat and coolant hose carries the coolant through the engine at an optimal temperature, cool the engine. It would quickly destroy the engine if left the heat to build up in it..
• This hose set fits for 2000 B-M-W 323Ci, 1999 B-M-W 323i Chassis: E46, 2000 B-M-W 323i, 2001 - 2006 B-M-W 325Ci, 2001 - 2005 B-M-W 325i , 2001 - 2005 B-M-W 325xi, 2000 B-M-W 328Ci, 1999 B-M-W 328i Chassis: E46, 2000 B-M-W 328i, 2001 - 2006 B-M-W 330Ci, 2001 - 2005 B-M-W 330i, 2001 - 2005 B-M-W 330xi, 2001 - 2003 B-M-W 525i..
• This hose set fits for 1997 - 2000 B-M-W 528i, 2001 - 2003 B-M-W 530i, 2001 - 2006 B-M-W X5 3.0i, ....