ReviewsEngine Crank

Cal-Van Tools 64 High Energy Ignition Tester

Attach spark plug wire to tester and clip tester to engine.
Crank the engine and check for the presence of spark.
Sealed chamber reduces risk of fire around high pressure fuel injection systems or marine use.

[Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1" to 1 1/ 8 inch -1/4" diameter. It comes with 2.05" step key..
[ ] Made from cold rolled stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
[Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
[Package Include] 1 Set Shaft Sleeve Adapter Kit.

Engine Load Leveler design to hook to a crane or hoist to handle and position large,bulky components.(NOT INCLUDE CRANE).
Engine leveler is made of high grade steel, safe and durable.Capacity:1500 lbs..
Package Include：1 x load leveler，2 x load leveler chains，2 x removable rings.（2 removable ring have been added to the product to increase the chain length.not with the stand）.
No instruction, easy to operate and maintain, no need for installation.Simply attach the chains to the engine and use the crank handle for quick and ease adjustments with the threaded shaft, which balances the load with ease..
Application: Heavy duty engine leveler easily changes center of gravity, saving time and labor..

[Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4"to 7/8" inch diameter. It comes with 2.01" step key..
[ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
[Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
[Package Include] 1 Set Shaft Sleeve Adapter Kit.

Constructed out of fade-resistant, high-quality ABS plastic, with no glue or screws.
Doors that can be opened, folding side-view mirrors.
Tilting engine bonnet which provides a full view of the engine block.
Mixing barrel is operated by a fold-out crank handle(hidden in the water tank).
2 slip-on chute extensions which attach to the sides of the truck, and can be slipped over the rear concrete chute.

Engine leveler has a 3/4 ton (1,500 lb) load capacity and is made from rugged, top quality structural steel.
It's ideal for garage, workshop, and agricultural jobs.
Fully adjustable, with 3 position chain mount holes to accommodate various engine configurations.
Features (4) 14" length chains, each equipped with an L-bracket assembly.
Simply attach the chains to the engine and use the crank handle for quick and ease adjustments with the threaded shaft, which balances the load with ease.

Coils produce high voltage necessary to ignite air/fuel mixture in the combustion chamber.
When not replaced, vehicle could experience any of the following: no/hard start, long crank time, misfire, lack of power, inconsistent transmission shift points, spark plug fouling, catalytic converter failure, poor fuel economy, CEL/MIL illumination.
Designed to operate dependably and reliably under all operating conditions and throughout the entire engine speed range for peak engine performance.
Global coverage for import and/or domestic applications.

Engine leveler has a 3/4 ton (1,500 lb) load capacity and is made from rugged, top quality structural steel.
It's ideal for garage, workshop, and agricultural jobs.
Fully adjustable, with 3 position chain mount holes to accommodate various engine configurations.
Features (4) 14" length chains, each equipped with an L-bracket assembly.
Simply attach the chains to the engine and use the crank handle for quick and ease adjustments with the threaded shaft, which balances the load with ease.
Heavy duty engine leveler easily changes center of gravity, saving time and labor.
Includes a 1 year limited manufacturer warranty.

Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..

Crankcase Splitter Separator is a must for disassembling vertically Motorcycle ATV Dirt Bike Small Engine 2 Stroke or 4 Stroke Crankcase.
Movable fingers allow a multitude of bolt patterns to be used..
Crank Puller/Installer Tool can Safely and easily pulls crank assembly into crankcase.
Package Include : Crank Puller/Installer Tool and Crankcase Splitter/Separator Tool , 8mm, and 6mm mounting bolts.
12--Month Warranty . If you have any questions , please feel free to contact us..

ENGINE SUPPORT: Maintenance part helps lift vehicle enginces and supports during maintenance for easy access to parts.
Made with durable materials to last in any garage, automechanic maintenance bay, or workshop.
ADJUSTABLE: Fully adjustable with threaded rod and 3 position chain mount holes.
CRANK: Rotating crank handle for quick adjustments.