ReviewsEngine Crankshaft Pulley

AA Performance Products 88 x 69mm 1700cc Slip-in Piston & Cylinder Kit, Fits VW

[Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft for 5/8" x 3/4" x 3" diameter.It comes with 2.01" step key..
[ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
[Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
[Package Include] 1 Set Shaft Sleeve Adapter Kit.

Check Stock

Zipper Gap Buckle compatible with Neverfull Pochette Little Pouch Chain Strap Connective Buckle (Gold)

【30 Series Torque Converter Clutch Kit】 This 3/4" Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts..
【For your convenience this kit comes with both sprockets】This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life..
【The Belt Feature】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"..
【Special function】This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
【Go Kart Torque Converter Kit comes with】1 x 3/4" Drive....

Check Stock

X AUTOHAUX 1\ to 1 1/8 Inch -1/4\ Engine Shaft Sleeve Adapter Kit with Step Key for Car

[Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1" to 1 1/ 8 inch -1/4" diameter. It comes with 2.05" step key..
[ ] Made from cold rolled stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
[Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
[Package Include] 1 Set Shaft Sleeve Adapter Kit.

Check Stock

JoyTube Turbo Engine Timing Tool Kit for Chevy Vauxhall Opel Cruze 1.0 1.2 1.4, Camshaft Holding Locking Tool en-49977-100 en955 km955

【Material】Turbo Engine Timing Tool Kit is constructed with aluminum and high quality steel for superior quality and durability..
【Application】This Engine Timing Tool Kit is compatible with Vauxhall / Opel : Adam 1.2 1.4 (2012- ), Ampera 1.4 (2011- ), Astra-J 1.4 (2009), Corsa-D 1.0 1.2 1.4 (2009-),Cascada 1.4 (2013-), Insignia 1.4 (2011-), Meriva-B 1.4 (2010-), Mokka 1.4 (2012-), Zafira-C Tourer 1.4 (2011-),Buick Encore1.4.
【Function】Designed to lock the cam and crank shafts in position to allow the removal and replacement of the timing chain fitted to the Vauxhall/Opel twin Cam engines..
【To Ensure&Remove】Ensure the chain tensioner is fully retracted and held in the retracted position using a suitable pin. Remove the crankshaft pulley using an appropriate pulley holding tool..
【Storage】Comes with a case, easy to use and store the tools..

Check Stock

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pulley Holders, simply return it for a full refund in 30 days. Premium Support & 12 - Month Warranty.

Check Stock

Assault Racing Products 2253KIT-BK Big Block Chevy Black Billet Aluminum Gilmer Belt Drive Pulley Kit BBC 427 454

Short / Long Style Mechanical Water Pumps up to 5/8in Shaft.
Water Pump Pulley, Crankshaft Pulley, Alternator Pulley, Belt.
Water Pump and Crankshaft Pulleys are 1:1 Ratio.

Check Stock

Ford F5RZ6A340B F5RZ-6A340-B Engine Crankshaft Pulley Bolt

Package Dimensions: 1.27 L x 10.16 H x 7.366 W (centimeters).
Included components: Engine Crankshaft Pulley Bolt.

Check Stock

Bapmic Mechatronics Sealing Sleeve and Double D Gasket Compatible with BMW E60 E65 E66 E70 E71 E90 335i

[Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4"to 7/8" inch diameter. It comes with 2.01" step key..
[ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
[Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
[Package Include] 1 Set Shaft Sleeve Adapter Kit.

Check Stock

MOOSUN GO-KART TORQUE CONVERTER CVT CLUTCH 3/4" COMET TAV2 30-75 218353A Manco 12T #35 and 10T #40 41 420

【30 Series Torque Converter Clutch Kit】 This 3/4" Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts..
【For your convenience this kit comes with both sprockets】This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life..
【The Belt Feature】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"..
【Special function】This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
【Go Kart Torque Converter Kit comes with】1 x 3/4" Drive....

Check Stock

Harmonic Damper Pulley Holding Tool Crank Removal Wrench Tool & Crankshaft Pulley Holder for Lexus Toyota Nissan etc.

Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on toyota / lexus timing belts or to remove the crankshaft pulley.
Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pulley Holders, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.

Check Stock

Sunluway for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with Crank Bolts

GREAT FITMENT: Fit for Lexus 1990-later: 3.0 L6, 3.0 t V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
fit for Toyota 1996-later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7.
HIGH QUALITY: Made of high quality-42CrMo Steel, heavy duty and durable, surface coated with black paint to ensure resistance to corrosion and rust,....
NICE DESIGN: Designed to hold the crankshaft pulley while loosening or tightening the centre screw. Needn't to remove radiator or other components to....
USE SIMPLLY: To tighten crankshaft pulley by 2 screws (M8 x 1.25) Extend operation needs 1/2" Drive Wrench. Prevent the harmonic damper pulley from....
SATISFACTION GUARANTEE: If you're not 100% satisfied with this Harmonic Damper Pulley Holding Tool, simply return it for a full refund in 30 days,....

Check Stock