ReviewsEngine Crankshafts

BILT HARD Gas Engine 79cc, Gas Motor for Go Kart, Mini Bike, Log Splitter, EPA & CARB Certified, 4 Stroke OHV Horizontal Shaft with Recoil Start

...ration which reduces work fatigue, making it ideal for small equipment applications and as a replacement for the standard 2-stroke high emission engines used in these applications..
Industrial Grade Made: All BILT HARD engines are industrial grade and feature cast-iron sleeves, automotive grade rods, pistons, rings, crankshafts, valve and valve springs. 3,600 RPM engine speed, splash-lubrication system provides efficiency. Easy-reach recoil starter system with auto-decompression..
Noted: Every item will be Oil Tested before packaging, so it may look used or touch a little oily, but 100% new condition..

Check Stock

Valvoline 4-Stroke ATV/UTV SAE 10W-40 Motor Oil 1 QT Case of 6

Formulated with proprietary Synerlec additive chemisty providing 3X to 4X the load carrying capacity of other synthetic engine oils.
High film strength protects buckets, crankshafts and reduces piston scuffing.
Cooler operation and less parasitic power loss.
Meets the requirements of JASO MA2 for wet clutch compatibility.

Check Stock

King +.010\ Under Size Rod & Main Bearings Compatible with 1999-10 Chevy LS 4.8L 5.3L 5.7L or 6.0L VORTEC for .010\ Under Size Crank

Compatible replacemements for 1999-2010 Chevrolet & GM engines with .010" under size Journals.

Check Stock

Oh L'amour - Thomas Tank Engine Sleeve

Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..

Check Stock

Gas Engine Motor, 6.5 HP 4 Stroke Gasoline Engine for GX160 OHV Go Kart Air Cooled Pull Start Motor Gas Engine 160CC 3600 RPM Industrial Grade Gas Engine Replacement, 4.8Kw

...0rpm, fuel consumption: 360g/kw.h, shaft diameter: 20mm, rotation: clockwise,, installation instructions: not included. Gross weight: 13.36kg Net weight: 12.9kg, product size: 38*35*32cm/15*13.8*12.6"..
✅【CONVENIENT AND HIGH PERFORMANCE】—The whole machine adopts high-quality materials, metal cams, and forged crankshafts, which have stronger performance and longer life. The cast iron cylinder liner is convenient to start, easy to start, and the engine runs more stably..
✅【OVERHEAD VALVE (OHV) DESIGN】—Low fuel consumption, low operating temperature, high performance. Large capacity air filter improves air filtration performance and reduces wear..
✅【WIDE APPLICATIONS】—This gas engine is widely used in compressors, scarifiers, lawn mowers, pumps, generators, pressure washers, cement mixers, dust collectors and flail lawn mowers..
✅【PROFESSIONAL SERVICE】—We will ship directly from the US warehouse, we are committed to providing each customer with the best quality service. If you have any questions or receive a substandard or damaged product, please contact us promptly and we will help you immediately..

Check Stock

palart 1 Set 3/4" to 1" inch w/Step Key Gas Engine Pulley Crank Shaft Sleeve Adapter for Predator

Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..

Check Stock

Gas Engine Pulley Adapter Kit, 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key

Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..

Check Stock

Yuesstloo Turbo Engine Timing Tool Kit for Vauxhall Opel Chevy Chevrolet Aveo Cruze 1.0 1.2 1.4, Camshaft Holding Locking Tool Set with Case & Gloves

...he tools. Boxes contained crankshaft locking pin, camshaft setting plate, camshaft sensor setting tool x 2, camshaft sprocket holding tool, chain tensioner locking pin x 2, and with a pair of gloves..
Made of high-quality steel, durable, strong and stable, rustproof, not easy to deform. Designed to lock the cams and crankshafts in order to allow disassembly and replacement of timing chains adapted at the Vauxhall Opel Chevy engine. Make sure the chain tensioner is completely retracted and held in the retracted position using the suitable pin..
Yuesstloo Turbo Engine Timing Tool Kit is compatible with Vauxhall Opel, Adam 1.2 1.4 (2012- ), Ampera 1.4 (2011- ), Astra-J 1.4 (2009), Aveo1.2 1.4 (2011-), Corsa-D 1.0 1.2 1.4 (2009-), Cruze 1.4 (2011-), Cascada 1.4 (2013-), Insignia 1.4 (2011-), Meriva-B 1.4 (2010-), Mokka 1.4 (2012-), Orlando 1.4 (2012-), Zafira-C Tourer 1.4 (2011-).
Engine Codes: LWD, L2Z, LDD, LUU/A14XFL, LDD/A14XER, LDD/A14XEL, LUJ/114NET, LUJ/A14NEL, A10XEP, A12XEL, A12XER, A14XEL, A14XER, A14NEL, LUJ/A14NET, LDD/A14XER, LUJ/A14NET, LUH/A14NEL, LUJ/A14NET, LUJ/A14NEL, L2Q/A12XEL, LDC/A12XER, LWD/A12XEL, LDD/A14XEL, LDD/A14XER, LWD/A12XEL, LDD/A14XEL, LDD/A14XER.
100% CUSTOMER SATISFACTION GUARANTEE: If you are unhappy for any reason or....

Check Stock

Wiseco WPC105 Crankshaft Assembly for Yamaha YFS200 Blaster, Black

Counter-weighted crankshafts greatly reduce power robbing and damaging crank-flex, high RPM harmonics and vibration through the entire power range.
EMPI's Counter-weighted Crankshafts are perfect for the racer on a budget.
These cranks are precision ground, micro-polished, nitrided, balanced and use stock VW main and rod bearings.
Features include: forged from 4140 chromoly, radiused standard/standard journals, chamfered oil holes, 8 dowel, 8mm dowel pins and cross-drilled.

Check Stock

LicBund 5/8" to 3/4 Inch w/Step Key Gas Engine Pulley Crank Shaft Sleeve Adapter Pulley Bore Reducer Bushing Sheave & Key Predator

Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..

Check Stock

EAI Oil Seal 30mm X 55mm X 7mm TC Double Lip w/Spring. Metal Case w/Nitrile Rubber Coating

... rotary elements! Crafted with rubber, garter spring, and inner metal case, this metric nitrile engine oil seal effectively prevents the leakage of lubricants and prevents the entry of dust and dirt into your precious machine..
GREAT FIT: 30mmx55mmx7mm size. The perfect double lip oil seal for automotive, motorcycle crankshafts, differentials, camshafts, axle shafts, machinery, water pumps, valves, front and rear wheels, and vehicle engines. Our oil seal will fit perfectly everywhere you need it..
HIGH-TEMPERATURE RESISTANCE: With its 70A Nitrile Butadiene Rubber cover material design, this spring loaded metric rotary shaft will withstand temperatures from -4℉ (-20°C) to 245℉ (120°C).
HYDROCARBON FLUIDS: Engineered for the hydrocarbon fluids sealing environment, this 30x55x7mm TC oil seal boosts a good resistance to grease, mineral oil, hydraulic fluids, and petroleum oil. What more, this seal has low swelling in water, ensuring long term use..

Check Stock