ReviewsEngine Cylinder Puller

NEWZQ Tilt Trim Motor with Reservoir 809885A1 809885A2 for Mer-cury Mar-iner Fo-rce, Mer-cury/Mariner Outboards(Single Ram) Late Model 50-150HP, Fo-rce Outboards(Double Ram) 50-125HP

  • OTC Cylinder Sleeve Removal Plates are designed to work in conjunction with OTC manual (no. 1200) and hydraulic (1202 and 1203) cylinder sleeve puller sets.
  • For use when pulling sleeves on truck, bus, and tractor engines, as well as those in other vehicles.
  • Cast and machined heavy duty steel for durability under repeated use.
  • Plate measures 4.980 O.D, 4.860 I.D. (+.010 -.000).
  • For 4-7/8 inch bore Cummins N and NH series engines, and Mack ENDT - 672 engine.
Check Stock

Diesel Fuel Filter for VW Golf Jetta TDI HENGST Made in Germany

  • Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine.
  • Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda.
  • Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer.
  • Replace Injector Seals: This kit include injector oil seal install tool, help you to reseal and reinstall fuel injectors.
  • Combinate Kit: This kit include different diesel petrol injector puller, slide hammer, injector oil seal reinstall tool, injector brush, this case have all the tools for replace fuel injector.
Check Stock

OEMTOOLS 37138 Compression Tester Gauge Set, Compression Tester Automotive, Engine Compression Tester with Flexible Hose, 14mm and 18mm Adapters

  • ESSENTIAL CYLINDER COMPRESSION TESTER: Monitor the health of your engine with an accurate reading from our tester.
  • Featuring a 14mm and 18mm adapter for spark plug ports.
  • Read the condition of your engine’s cylinders with our easy-read pressure gauge.
  • ACCURATE COMPRESSION READINGS: Our engine compression gauges give you an accurate reading of engine's compression.
  • The compression test kit's flexible rubber hose extension allows you to easily access spark plug ports.
  • GREAT FOR CARS AND TRUCKS: Maintaining your vehicle’s engine is essential to the longevity of the vehicle.
  • Work on cars and trucks with the cylinder compression test kit's 2-step 14mm and 18mm adapters to determine the health of your cylinders.
  • DIAGNOSITC TOOL: Diagnose problems with your vehicle’s cylinders using our engine compression test kit.
  • Valves sticking, cracked cylinder heads, worn cylinder walls, and more can be diagnosed with our cylinder compression tool.
  • PRODUCT SPECIFICATIONS: This compression tester kit features a flexible rubber hose extension to reach spark plug ports.
  • (2) 2-step adapters sized 14mm and 18mm for cars and trucks.
Check Stock

Fuel Injector Return Line Kit - Fittings + Hose for VW Audi TDI 2.0L Diesel

  • Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine.
  • Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda.
  • Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer.
  • Replace Injector Seals: This kit include injector oil seal install tool, help you to reseal and reinstall fuel injectors.
  • Combinate Kit: This kit include different diesel petrol injector puller, slide hammer, injector oil seal reinstall tool, injector brush, this case have all the tools for replace fuel injector.
Check Stock

Recajia Universal 6 Hole Flywheel Rotor Magneto Puller Tool with 5mm Diameter and 6mm Bolts

  • [No Oil Leakage] - The hydraulic puller is forged with high-quality steel and cast in one piece. There is NO need for sealing rings and NO oil leakage. And the hydraulic cylinder is thickened with a strong pressure resistance..
  • [3 or 2 Jaws Interchange] - 3 jaws / 2 jaws can be easily interchanged can be easily interchanged, and can also be used Horizontally or vertically, without site restrictions. It is flexible to operate and easy to replace..
  • [Complete Accessories] - This 3 in 1 bearing puller set integrates pump, tubing, and drawing machine, which includes: 1 x hydraulic cylinder, 1 x handle, 3 x jaws, 6 x pulling tabs, 6 x screws, 1 x spring thimble, 1 x pull ring, 1x portable thickened plastic box..
  • [Wide Applications] - The bearing separator is widely used in various places. Such as truck hub, brake drums, sprockets, rotors, car axles, wheel bearing, shaft and pulley disassembly.
  • railway vehicle, factory machinery and mining equipment maintenance, etc..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the hydraulic puller, you can replace it for free..
Check Stock

ProVision PV2 Flexible Fiberscope / Inspection Scope w/ 36 In Non-Obedient Cable

  • 【Scope of application】Cylinder honing tools are suitable for degreasing engine cylinders with diameters from 3/4 in to 2‑1 / 2 in and 1‑1 / 4 in to 3‑1 / 2 in. The manufacturer's part number is 88233.
  • 【Excellent performance】This tool can be used to remove carbon deposits and hot glaze in the cylinder bore. This special tool can be used for small-bore cylinders, such as motorcycles, brakes, and clutch cylinders, ideal for removing rust deposits in old renovations..
  • 【High quality】The cylinder honing three jaws are made of high-quality iron materials, high strength, high hardness, rust and resistance, not easy to wear and not easy to age, and are made of special technology to enhance their stability and performance to ensure excellent durability and long service life ..
  • 【Ergonomics design】The engine cylinder grindstone adopts ergonomics design, which can be comfortably held, effortless to use, easy to operate, labor-saving, and high-efficiency, bringing you a lot of convenience. Flexible shaft, easy to use, and automatic centering. The knurling wheel can adjust the spring pressure of the stone on the cylinder hole..
  • 【Use steps】Spray lubricant on the stone or cylinder hole. Set the whetstone on the drill bit, insert the engine whets....
Check Stock

KUNTEC Cylinder Leak Down Tester Engine Compression Diagnostics Test Tool Kit for Piston Ring, Valve, Head Gasket

  • The Cylinder Leak Detector Kit is designed to easily detect a variety of engine faults, including worn piston rings, worn valves, cracked cylinder walls, and blown head gasket.
  • The Engine Compression Diagnosis Tester Kit also can check the amount of leakage and locate leaks area in an engine cylinder to help determine the source.
  • Cylinder compression tester is suitable for work on any petrol engine with 12 or 14mm spark plugs, and ideal for testing trucks & late model cars where clearance is minimal.
  • Pressure gauge with dual scale reads from 0 to 100 PSI and 0 to 7 Bar, shows pressure in PSI and Bar and percentage of cylinder leakage.
Check Stock

AKWH 15810-RKB-J01 VTEC Solenoid Spool Valve with Gasket Replacement for Hon-da Ody-ssey V6 3.5L 2005-2007 Pilot FWD Acc-ord V6 3.0L 2006-2008 15810RKBJ01

  • ...ol Valve OEM Part Number: 15810-RKB-J01 15810RKBJ01. Replacement for 2005-2007 Acc-ord Hybrid, 2005-2007 Ody-ssey EX / EXL / EXL-T, 2006-2008 Pil-ot 2WD MODELS ONLY OF TRIMS: LX / LXVP / EX / EXL / EX-SE P/N 15810-RKB-J01.
  • VTEC Solenoid Spool Valve Replacement for: 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head..
  • VTEC Solenoid Spool Valve Replacement for: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head..
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effectively have multi....
Check Stock

SUNROAD 80cc Bicycle Engine Kit 24″ 26″ 28″ 2-Stroke Motorized Bicycle Petrol Gas Engine Kit Red

  • Single Cylinder, 2-Stroke Gasoline Engine. Air-Cooling,Equipped with the 2-stroke 80cc single cylinder gasoline engine, our bike motor kit is suitable for most bikes with v-frame. It will better upgrade your regular bike to a motorized bike and let you enjoy the fun of riding..
  • The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26″ and 28″ bicycles with V-frames. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″)..
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check Stock

ASTOU Cylinder Head Gasket Sets for Saab for 9-2X Head Gasket Kit for Subaru for Legacy GT 2.5L HS26415PT-1

  • ❤GASKET SET INTERCHANGE PART NUMBER – HS26415PT-1, HS26170PT-1.
  • ❤GASKET SET SPECIFICATIONS – Our seals and gaskets are designed to meet or exceed all original equipment (OE) specifications for proper sealing, stabilize engine efficiency and increase driving comfort..
  • ❤GASKET SET FUNCTION – The cylinder head gasket set is an important component of the engine combustion chamber. They are fitted between the engine block and the cylinder head. The function of the cylinder head gaskets is to prevent engine coolant or engine oil from entering the cylinder while ensuring maximum compression..
  • ❤GASKET SET FEATURES – Our gaskets are designed to save customers money and time by providing accurate gaskets. The gasket has a non-viscous hard-wearing layer and good sealing innovation and technology to ensure that it can withstand the harsh conditions of the engine compartment and maintain the best operation..
  • ❤SUGGESTION – Please confirm whether the model is suitable before purchase. It is recommended to be installed by professionals. Package Includes: as shown in the figure..
Check Stock

X-PRO Long Case 150cc 4-stroke GY6 Air cooled Moped Scooter Engine with CVT Automatic Transmission, Electric/Kick Start…

  • 【Parameters】Engine type: Gy6 single-cylinder four-stroke, engine oil type: Sf15w-40 without oil, carburetor type: pd24j, carburetor type: horizontal vacuum carburetor, spark plug type: a7tc, ignition type: cfw, cooling: air cooling, oil number: >=87#, compression ratio: 9.2:1, clutch: shoe type automatic centrifugal dry clutch, transmission: cvt, ignition system: Cdi, starting method: electric/kick.
  • 【Specification】 Displacement: 150cc, maximum power (Kw/R/Min): 6kw/7500r/Min, rated power (Kw/R/Min): 5.2kw/7000r/Min, maximum torque (Nm/R/Min) : 7.6nm/6500r/Min, minute steady idle speed 1600±150r/Min, piston diameter: 57.4mm, piston stroke: 57.8mm, bore and stroke 2.26" X 2.28" (57.4mm X 57.8mm), lubrication capacity: 0.26 gallons (1200ml), cylinder working volume: 0.03 gallons (149.6ml), speed: 8 poles.
  • 【Features】 Large-flow oil pump: reduce friction pair wear and prolong engine service life.
  • aluminum cylinder head and cylinder block: improve heat dissipation, reduce weight, and increase engine torque.
  • crankshaft: engine low-speed high torque, crankshaft connecting rod adopts large diameter bearing, Increase the reliability of the bearing.
  • lubricating oil filter: help to remove solid pollutants in the lubricating oil, greatly reduce the wea....
Check Stock