ReviewsEngine Exhaust Manifold Bolt And Stud Kit

Spurtar Stud Remover Fit 1/4" to 3/4" (6 to 19mm) Bolt Extractor Nut Splitter With Knurled Roller and Cam Lock, Stud Extractor Tool For Broken Bolt Remover or Seized Studs

  • Heavy Duty Stud Master : Spurtar 1/2 inch drive stud puller, broken bolt extractor, nut remover suitable for 1/4 inch to 3/4 inch ( 6mm to 19mm ) studs from engine blocks, exhaust manifolds, cylinder heads, and other applications.
  • Optimum Fit Stud Extractor: Knurled roller uses cam action to grasp the stud firmly and secures optimum fit while minimizing damage to threads. Cam rotates to grip onto the stud for quick and easy use. Help easy out bolt extractor set studs quickly and efficiently.
  • Safe Stud Extractor Tool: Spurtar professional tools are for commercial or occasional use. Suitable for safely removing broken or seized bolts and studs. 2 holes 1/2" (14mm) and 3/4" (19mm) allow for an optimal fit and minimize thread damage.
  • Bolt Extractor Operation Guidance: Use with 1/2-inch drive ratchet wrench or flex handle and turn the extractor to engage the cam and stud to tighten, then turn until the stud is removed..
  • Rounded bolt Remover Unique design: The design allows the tool to be flush with the mounting surface of the stud, so it can grab a stud that breaks off very cl....
Check Stock

MAYS 8 Cylinder Engine Kit Mini V8 Model, TOYAN HOWIN FS-V800 1/10 Four-Stroke Water-Cooled Nitro Model for RC Car Boat Physics Science DIY Toy Kids & Adults - Version, 12.34 x 3.2 x 12.73cm

  • ... >> Integrated Crankshaft Processing: Designed with 90 degree cruciform crankshaft structure, three-section support, bearing at both ends and middle bearing bush, the engine allows more smooth operation and more sensitive acceleration response with up to 12500rpm. Integrated Exhaust Manifold: The small all-metal integrated exhaust manifold shaped by difficult processing technology makes V8 engine sound more powerful..
  • >> Enjoy DIY Assembly Fun: Crafted from ultra-precise components, the engine model gives strong mechanical sense, enables smooth assembly experience and provide users with fun, helping to build their own V8 engines. 8 Cylinder Engine Model Kit will encourage young boys and girls to learn a wealth of physics and intuitive engine principles, enhancing their creativity and logical thinking skills..
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Subaru Exhaust Manifold Stud & Nut Kit WRX STI Legacy Impreza Forester Crosstrek Outback Brz 800910550 902370029 Genuine Oem

  • Stud 800910550 X6 (10x41) Nut 902370029 x6.
  • 1990-2018 Legacy and Outback 1993-2018 IMPREZA 1998-2018 Forester.
  • 2002-2018 WRX 2004-2018 STI 2013-2019 CROSSTREK 2003-2006 Baja.
  • 2013-2019 brz 2006-2013 Tribeca 1992-1997 svx.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Flanged Hex Head Bolts, Flange Bolts, Exhaust Manifold Bolt Kit M10X1.5-35mm 6-Pack

  • Aftermarket 03423 Exhaust Manifold Hardware Kit.
  • Stainless Steel construction provides strength and offers good.
  • The bolt kits are ideal for securing exhaust components and eliminating exhaust leaks.
  • Fits some Toyota,BWM,Lexus,Chevrolet models.Please check the size before purchasing.
Check Stock

Vinco - Glukokine 60 tabs

  • Fitment: This Exhaust Manifold Bolt Set Compatible with Dakota V8 4.7L Club Cab 2WD 05 06 07 08 09 10 11 , 1500 V8 4.7L Laramie Quad Cab 2WD, Laramie....
  • Interchange/ Part Number: 6505316AA, 6507746AA, 6508219AA, 6508220AA, Specification: Thread Size: M6-1.0, Thread Size: M8-1.25, Material: Steel,....
  • Package included: 4 Studs(2 Long & 2 short), 4 Bolts and 4 Nuts.
  • Engineered from premium materials to provide exceptional service life and reliability.
  • Designed to withstand the harsh conditions in the modern engine compartment.
  • Advanced manufacturing technology ensures durability and optimum operation....
Check Stock

DEWILL Broken Bolt Remover, Stud Extractor Tool to Locks and Removes 1/4-Inch to 1/2-Inch Rounded Studs, Hexagonal Flat - Suitable for Rust, Painted, Damaged Waste Bolts

  • ...t or stud firmly, continue to rotate the stud counterclockwise until it is removed.Then release and separate them in a clockwise direction..
  • EFFICIENT & VERSATILE - This stud removal tool is easy to operate and can help you get more rest time, whether it is the exhaust manifold, fuel plug, broken bolts, or broken, painted, rusted fastening screws The posts are effectively removed, but the threaded surface may be slightly worn due to the strong clamping force..
  • TRADITIONAL UPGRADE - Traditional bolt extractors are limited in size, and too many types of extractors waste space and cost. It's too much trouble for your mood, so we designed an auto-adjustable extractor that easily clamp the damaged studs for stripping, saving you valuable time，It is definitely a great addition to your toolbox..
  • GUARANTEE SERVICE - Provide 100% satisfactory and reliable customer service within 24 hours. If you have any needs, please contact us immediately, we promise to give you a satisfactory answer..
Check Stock

VM22 26mm Carburetor for SSR Mikuni125cc 110cc 140cc Lifan YX Zongshen Pit Dirt Bike XR50 CRF70 Apollo DHZ | Pit Bike Carb by IVONNEY Y-14021

  • ...r adapter compatible with any 110 cc, 125 cc, 140 cc Lifan YX Zongshen Pit Dirt Bikes. Please compare your carburetor with the pictures and make sure this 26mm carburetor kit fits your motorcycle before you purchase.
  • Specification - 1 x vm22 carburetor kit, you will get all parts shown in the pictures. Engine side - Manifold Bolt Eye-Eye: 48mm, Manifold Outlet Diameter: 26mm (22mm inner), Manifold Bolt Diameter: 6.5mm, Air Filter Outlet Diameter: 38mm. Please allow our pit bike carb data to have a slight manual measurement deviation.
  • Warranty - 100% satisfactory service, We provide carefree return, and 90 days money back guarrantee! If there is any issues about our vm22 26mm carburetor, Welcome To Contact With Us Before Or After Your Purchase. Our Warm & Responsible Customer Service Always Be Here For You.
  • Pit bike carburetor 125cc, 125cc pit bike carburetor kit, 125cc pit bike carburetor 26mm, 125cc pit bike carburetor cover, pit bike carburetor 110cc, pit bike carburetor 140cc, 140cc pit bike carburetor, 125cc dirt bike carburetor, 125cc dirt bike carburetor kit, 125cc dirt bike carburetor high performance, 125cc carburetor, 125cc carburetor kit, 125cc carburetor dirt bike, 110cc carburetor, 140cc carburetor, 140cc pit bike carburetor, 140cc dirt bike....
Check Stock

Mostbest Head Stud Replacement Kit for SBC Cylinder Head Stud Set # 1525-Stud/ 279.1001

  • ❤️This kit has 14 long studs, 4 medium length, and 16 short studs..
  • ❤️ This listing is for the sbc head stud kit. We have used this kit on all of our sbc engine buildups, and the fitment is perfect. You will receive every stud needed to install both cylinder heads on your engine..
  • ❤️These head studs are made from aircraft quality 8740 high tensile strength chrome moly steel. They are twice as strong (190,000 psi steel alloy) as the stock head bolts. Kit that comes complete with 12 point hex nuts and washers. Very similar or rather identical in design and function to the ARP kits..
  • ❤️Studs make head installation a lot easier as the studs align the head and hold the head gasket in place.
  • ❤️ They clamp much better since the stud is loosely threaded into the block and the clamping torque is generated at the stud-nut interface rather than the block-bolt interface.
Check Stock