ReviewsEngine Fan Clutch Replacement

Everything you need to know about Bicycle Chains: A book of special insights for expert mechanics

  • DIRECT REPLACEMENT: The Flying Horse Motorized Bicycle Clutch Handle is used on most standard two stroke motorized bicycle engine kits and is used to engage and disengage your engine..
  • SPRING LOADED LOCK: This clutch lever features a spring loaded button that will lock your clutch lever in the disengaged position. That way when you choose to ride your bike with out the engine you no longer have to hold the clutch lever pulled in.
  • EASY INSTALLATION: Installation is a breeze: install the beaded end of your clutch cable in to the lever arm. Mount the lever to your handlebars and adjust your clutch cable tension as needed- now you’re ready to ride.
  • UNIVERSAL FIT: Designed to work with most standard 48cc, 60cc, 66cc and 80cc 2 stroke motorized bike engines..
  • PACKAGE INCLUDES: 1x Flying Horse 2-Stroke Bicycle Clutch Clever. Color & Appearance May Vary.
Check Stock

ECCPP ECCPP Engine Cooling Fan Clutch Replacement fit for 1996 1997 1998 1999 2000 2001 2002 2003 Chevrolet Blazer/C1500/C2500 Suburban

  • FITMENT - This fan clutch fits for 1999-2000 Cadillac Escaladel,1996-2003 Chevrolet Blazer,1996-1999 Chevrolet C1500,1996-1999 Chevrolet C1500....
  • FITMENT - ,1996-2002 ChevroletExpress 3500,1996 2001-2002 Chevrolet G30,1996-1999 ChevroletK1500,1996-1999 Chevrolet K1500 Suburban,1996-2000....
  • FUNCTIONS - It regulates cooling air flow by controlling fan speed in accordance to ambient air temperature around radiator area optimal heat balance....
  • ATTENTION - Donâ€t forget to search for See all vehicles before purchasing,and you can also look though the information including picture just....
  • ECCPP PERFESSIONAL COOLING FAN CLUTCH MANUFACTURE - If you have any questions about our engine cooling fan clutch,never mind contact our friendly,....
Check Stock

Aintier Radiator or AC Condenser Engine Cooling Fan Clutch 2790 Replace Fit for Dodge Durango/Dakota/D150/D250/D350

  • FIT THESE VEHICLES – 1992-1993 Dodge D150.
  • DETJTECTION – 1.Fan spins excessively when engine is stopped.2.Poor A/C performance at idle or low vehicle speeds.3.Fan speed does not increase when engine is hot.4.Fan speed does not increase until engine is excessively hot.5.Fan blade tip moves more than 1/4â€front to back.6.Fan turns roughly or does not turn at all.7.Excessive fan noise at all speeds due to failed bearing.8.Vibration that increases with engine speed..
  • INSTALLATION – Step 1: Remove the fan shroud.
  • Step 3: Rock from side to side. Step 4: Remove the bolts.
  • Step 7: Put the fan back into the engine..
  • FEATURES – Turns the fan 70-90% of the shaft speed when engaged for increased cooling.
  • Turns the fan 25-35% of the shaft speed when disengaged.
  • Used with deeper pitch fans (2-1/2″of pitch).
  • Land and groove design with up to 27 square inch of working surface.
  • Identified by finned aluminum face plate and thermal spring on the front.
  • PACKAGE INFORMATION – 1 piece of engine cooling fa clutch,and our professional customer service team,ple....
Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

  • ...he ABN 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans.
  • The holder bar keeps the water pump pulley in place while loosening the radiator fan.
  • FITS YOUR VEHICLE: Made to be compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54.
  • Also compatible with some Ford, GM, and Chevy models.
  • Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
  • BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
  • 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
  • If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the water pump, remove bolts and reinstall over bar.
Check Stock

BETOOLL 32mm Fan Clutch Nut Wrench Water Pump Holder Removal Tool Kit Compatible with BMW E34 E39 E36 E46 E90

  • Only applicable to the following engine models in the BMW models described in the title: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32..
  • In order to disassemble the water pump on models with temperature-dependent viscosity-driven fans. Note: This 32mm fan clutch nut wrench is only compatible with BMW engines..
  • The fan clutch wrench removed the lock nut on the hot-tack fan..
  • The fan clutch bracket allows the technician to fix the water pump pulley in place while loosening the radiator fan..
Check Stock

EASYUSE 2-Piece Fan Clutch Wrench Set,Removal Tool for BMW, Mercedes, Ford and Other Engine Models,Fan Clutch Nut Wrench & Water Pump Holder

  • [DURABILITY]:Constructed from premium high strength steel, this fan clutch wrench set is built to last a lifetime, and the rubber grip helps to prevent hand fatigue during prolonged use..
  • [COMPATIBILITY]:Made for but not limited to the following engine models M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B3.
  • [INCLUED]:1 pc Wrench, 1pc Fan Clutch Holder.
  • [DESIGN CONSIDERATIONS]: Our 32mm 2-piece Fan Clutch Wrench Set is designed to easily remove the lock nuts on a temperature dependent thermo-viscous fan. This tool allows the user to easily hold the water pump pulley in place while loosening the radiator fan..
  • [EASY TO USE]: Easily remove the lock nuts on temperature dependent viscosity drive fans.
  • easily hold the water pump pulley in place while loosening the radiator fan..
Check Stock

Lisle 43390 36mm Wrench

  • Quickly removes and installs fan clutch when repairing the water pump or fan clutch.
  • Faster and easier than conventional fan clutch wrenches.
  • For more information check the main Lisle tool- 43300.
Check Stock

NexADD Fan Clutch Wrench Set 32mm & 36mm Water Pump Holder Tool Fit for BMW Ford GM Chevrolet,Fan Clutch Nut Wrench Set,Fan Clutch Removal Tool,Water Pump Pulley Holder,Clutch Fan Removal Tool Kit

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES ★- The NexADD 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans. The holder bar keeps the water pump pulley in place while loosening the radiator fan. It is a direct replacement and completely fit, wich could help you save much money..
  • FITS YOUR VEHICLE★-The NexADD Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to,the following applications: fan clutch wrench tool is kit compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and compatible with Ford.Also compatible with some Ford, GM, and Chevy models..
  • BUILT TO LAST★- The 15" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily. The rubber handle covered in the middle helps prevent hand fatigue during prolonged us..
  • EASY TO USE ★- Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clock....
Check Stock

ARES 15027- Cooling System Refill Kit - Easily Test for Leakage in Cooling System - Change Coolant Quickly - Works with Most Radiator and Coolant Bottlenecks

  • Easy to Use: Easily remove the lock nuts on temperature dependent viscosity drive fans.
  • easily hold the water pump pulley in place while loosening the radiator fan.
  • Compatible: Made for but not limited to the following engine models M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B3.
  • Heavy and Durable: Premium high strength steel for this 32mm Automotive Fan Clutch Nut Wrench.
  • If you need to remove the reverse threaded fan,this fan clutch wrench Worked great, made the job of replacing the radiator so much easier..
  • This 2-Piece Fan Clutch Wrench Set is a necessary option if you are going to remove your thermostat or water puimp. Cut my job in more than half the time without it. I recommend that anyone this job needs this tool and the combo set makes it a brainier.
Check Stock

SchaefflerLuK DMF023 Dual Mass Flywheel OEM Dual Mass Flywheel LuK Replacement Clutch Parts

  • OEM Clutch Replacement Kits: Our LuK DMF019 dual mass flywheels suit a huge variety of vehicles! The flywheel is an integral part of your clutch....
  • Replacement Flywheel: Today’s tightly packaged clutch systems leave little room for error. The clearance between the disc damper and the....
  • LuK Flywheel: The dual-mass flywheel absorbs engine vibrations before they are transmitted to the driveline where they can rattle gears. It has a....
  • Dual Mass Flywheel: The primary section of the LuK DMF dampens, isolates engine vibrations and prevents engine torque spikes from damaging the....
  • OEM Flywheel: As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. Each OEM part is....
Check Stock

Lisle 14440 Water Pump Wrench

  • More extensive design: 32mm&36mm clutch fan removal tool kit, compatible with a wider range of models than similar products, compatible with most models of BMW, Ford and Mercedes-Benz. And its price is more affordable and better quality. This is a two-piece multifunctional tool that you will like..
  • Application: 32mm&36mm wrench tool is compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and newer models, compatible with Ford..
  • Brand new upgrade tool: 32mm & 36mm Fan Clutch Nut Wrench tool is more practical than similar tools on the market. It has passed rigorous engine tests and is fully fitted, which can save you a lot of money.
  • Quality: This 2-piece fan clutch wrench set is made of high-strength steel, with precise dimensions, and has undergone many actual vehicle tests. The rubber handle covered in the middle helps prevent hand fatigue during prolonged use..
  • Service: ZKTOOL has the most perfect warranty service. We provide all the necessary information for each product. If you have any questions, please contact us. We will wait 24 hours..
Check Stock