ReviewsEngine Harmonic Balancer

Dorman 594-080 Engine Harmonic Balancer Compatible with Select Ford / Lincoln / Mercury Models

Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components.
Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price.
Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance.
Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Check Stock

OEMTOOLS 27306 Long-Reach Harmonic Balancer/Pulley Installer, Extra Long Forcing Screws for Hard to Reach Balancer Pulleys

MANY APPLICATIONS: The forcing fasteners in this harmonic balancer puller fit a wide variety of V8 and V6 vehicles.
M16 x 2.0 mm (GM), M14 x 1.5 mm (Dodge, Chrysler, and Jeep), M12x 1.75 mm (Dodge Chrysler, and Jeep), and M12 x 1.5 mm (Ford).
SAVE TIME AND MONEY: Car repairs can be expensive.
By using this harmonic balancer installer, you will be saving over $600.
You can also save time with this balancer installation tool by not waiting for repairs at the auto shop.
CONVENIENT PACKAGE: All of the pieces in this harmonic balancer installer kit come in one convenient package, making the pieces both easy to find and easy to store.
Never worry about losing pieces with this harmonic balancer puller set.
EASY TO USE: Assemble the threaded rod nut bearing with the bearing facing away from the hex.
Insert the threaded rod through the balancer and fastener into the crankshaft.
Use a second wrench to rotate the assembly.
EFFECTIVE: The three puller arms have a significant bite to grip and remove pressed-on harmonic balancers.

Check Stock

AUTOAND GM Harmonic Balancer Remover Puller, Automotive Replacement Engine Harmonic Balancer without Tapped Holes, Crank Pulley Puller Compatible with Ford Coyote 5.0

[QUICK & SAFE] GM harmonic balancer puller kit is intended to quickly and safely remove harmonic balancers without tapped holes. This tool features a "clip-in" design allowing removal without bolting the puller to the balancer. The harmonic balancer without threaded holes can also be easily removed..
[APPLIACABLE VEHICLE] The harmonic balancer puller tool is compatible with GM models: 5.3L, 5.7 LS1, 6.0 LS2, 6.2 LS3, 7.0 L. Compatible with Chrysler, Jeep, Dodge models: 3.5 L V6, 3.6L V6, 4.7 L V8, 5.7 L V8, 6.1 L V8..
[INAPPLICABLE VEHICLES] This tool is not applicable to 1997 or earlier GM LT (5.7L LT1003c4) series engines (with threaded holes), and does not apply to 2018+ Ford 5.0 engines and newer Coyote balancers. Also will not work with the truck pulley. (If you have any issue, please feel free to contact us by email).
[EASY TO USE] Lubricate and tighten the pressure screw, after inserting the jaws into the spokes, turn them carefully clockwise to engage the harmonic balancer. Tighten the pressure screw to reach the crankshaft, finally use a wrench or a ratchet to turn the compression screw carefully until the harmonic balancer is removed..
[HIGH QUALITY] The harmonic balancer removal tool allows you to complete the work faster and save your time, w....

Check Stock

Shorty's Skate Tool The Wench

Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..

Check Stock

ABN Long Reach Harmonic Balancer Installer Kit – 5 Piece Harmonic Balancer Pulley Puller Set Damper Puller Kit

PROTECT YOUR CRANKSHAFT FROM FAILURE: The ABN Long Reach Harmonic Balancer Installation Tool Pulley Set allows you to quickly and easily install replacement harmonic dampers into your vehicle.
A harmonic balancer protects your vehicle from damaging vibrations that can wear down the life of your crankshaft and protects your crankshaft threads from stripping, making it important to install the harmonic balancer with precision and accuracy.
FITS YOUR VEHICLE: Designed for use on many late Ford, GM, Dodge, and Chrysler vehicles with V8 and V6 engines.
Long reach thread sizes include M14x1.5, M12x1.75, M12x1.5, M16x2.0.
EASY TO USE: Attach the pressure bearing screw nut onto the chosen jack screw.
After guiding the replacement harmonic balancer onto crankshaft pin, thread the jack screw into the crankshaft and hand tighten the pressure bearing to the harmonic balancer.
Continue tightening system into place with hand wrench (not included) and remove installer assembly.
CONTENTS: Long reach harmonic puller tool includes a pressure bearing and screw nut assembly tool and 4 jack screws to fit a variety of vehicle sizes.
Constructed of heavy-duty metal materials for durability and longevity with a black oxide finish for resistance to....

Check Stock

SEEBOO LS Harmonic Balancer Installation Tool Crank Pulley Install Tool Compatible with GM 1997-UP V8 LS1 LS2 LS3 LS4 LSX LSA LS6 LQ4 LQ9 with Thrust Bearing & Wrench Flats

【HIGH PERFORMANCE】—The Crank Strength Of The Harmonic Balancer Installation Tool Is 12.9, And It Is Made Of High-Quality 35CrMo Heavy Steel. The Quenching Process Is Modulated To Ensure That It Does Not Affect Long-Term Use. The Surface Is Black And Rust-Proof. There is No Need To Worry About The Wrench Slipping Off During The Installation Process With Customized Flange Nuts!.
【COMPATIBLE WITH CHEVROLET GM LS & LT SERIES 】—Harmonic Balancer Installation Tool Suitable For Camaro, Corvette, Trans Am, GTO, G8, LS Truck Or LS Power Road Signs. Compatible With All GM LS And LT Series Engines From 1997 To The Present (Third, Fourth And Fifth Generations). You Can Also Search For Matching Models Through Amazon To Purchase!.
【 INSTALLATION AND REMOVAL 】— Can Be Screwed Completely Into The Crank, Just Slowly Twist The Nut Until The Pulley Is In Place. The Upgraded Wrench Plane Is Convenient For Disassembly Without Worry，This Is Required For Engine Replacement Or Balancer Upgrades. A Little Lubricating Oil Will Make It Smoother When Using!.
【 PACKAGE INCLUDES 】— 1*Stud, 2*Washer, 1*Thrust Bearing, 1*F....

Check Stock

Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set

[Effortlessly Remove Harmonic Balancers] Use the ABN 46 Piece Harmonic Balancer Puller Kit - Flywheel Puller, Crank shaft Pulley Puller, Steering Wheel Puller Set to apply even pressure to the hub so you can safely remove harmonic balances and other vehicle parts.
[Fits your Vehicle Needs] Steel yoke with 4 slots and 30 harmonic balance puller bolts allow you maximum versatility to handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles.
[Various Bolt Sizes] 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
[Built to Last] Heat-treated carbon steel ensures maximum strength.
Chrome and black oxide finishes resist rust and corrosion.
Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
[Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch....

Check Stock

Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine

Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..

Check Stock

VQL Harmonic Balancer Steering Wheel Puller Kit (13 Piece) with Blow-Molded Case Use for Removing Harmonic Balancers, Gear Pulleys, Steering Wheels and Crank Shaft Pulleys

【Widely Used】 Harmonic Balancer Steering Wheel Puller Tool are used to removal of harmonic balancers, gear pulleys, steering wheels and crank shaft pulleys. This is a universal type puller.003c/p003e.
【Durable】 13 Piece Harmonic Balancer Steering Wheel Puller Kit are made of high-quality steel, Drop Forged, Heat Treated, this tool set is very durable.003c/p003e.
【Apply Pressure Evenly】 Yoke allows for either 2 or 3-hole application. The harmonic balancer puller allows uniform pressure on the parts, No need to worry about the steering wheel puller and harmonic puller puller kit will damage the auto parts.003c/p003e.
【Package Included】 1* center screw, 1* Floating swivel, 2* 5/16 x 4 bolts, 2* 1/4 x 3 bolts, 3* 1/4 x 2 bolts, 3* 5/16 x 2 bolts and 1* Blow-molded Case.003c/p003e.
【Various Sizes】 Steering wheel pullers has a caster with four slots for using in nearly any configuration. Various sized provides necessary versatility.003c/p003e Buy with confidence. We provide refund and exchange service, if you have any questions, please feel free to contact us.003c/p003e.

Check Stock

77080 Harmonic Balancer Socket Tool 19mm Fits for Honda Use with 1/2 drive & 50mm Crank Pulley Wrench Holder Crankshaft Pulley Removal Tool Fits for Honda Acura

【Application】19mm Harmonic Balancer Socket used in conjunction with a 1/2-inch drive for Honda engines using 19mm hexagonal pulley damping bolts....
【Function】19mm Harmonic Balancer Socket is suitable for removing the lug nuts from the tightening wheel. 50mm Crankshaft Crank Pulley Wrench....
【Advantages】19mm Harmonic Balancer Socket has thicker walls reduce bending and vibration to provide maximum torque. 50mm Crankshaft Crank Pulley....
【Superior Material】Made of sturdy, heavy-duty steel with black coating, anti-corrosion for professional level reliability and durability. Ensure....
【100% Satisfaction Guarantee】Yoursme committed to providing customers with a good product experience, if you are not satisfied with our products,....

Check Stock

OCPTY OCPTY Harmonic Balancer Crankshaft Belt Drive Pulley Fit For 2005-2007 2010 for Scion tC 2008-2015 for Scion xB 2009-2013 for Toyota Matrix 2001-2008 for Toyota RAV4 2002-2008 for Toyota Solara

COMPATIBLE MODELS - Fit 2007 2008 2009 2010 2011 2012 2013 Nissan Altima, 2007 2008 2009 2010 2011 2012 Nissan Sentra.
PART NUMBERS - Replace for 1340700H010 1347028020 134700H010 594-198 number crankshaft pulley harmonic balancer.
PRODUCT DETAILS - The crankshaft pulley is one of the key functional components on the gasoline engine, which is installed on the front end of the crankshaft and rotates with the crankshaft. It is to drive the power source of other engine accessories, relying on the transmission belt to drive generators, pumps, booster pumps, compressors and other operations.
REPLACE ADVANTAGES - Manufactured to OE design ensuring each balancer will install properly and function as intended.Dynamically balanced for proper absorption of the crankshaft vibrations.
PLEASE NOTE - Please check car make model trim engine,product appearance and part number to make sure this is the right part you need.Any question you have please contact us for a answer.

Check Stock