ReviewsEngine Intercooler

Mishimoto MMINT-RGR-19KBKBK Performance Intercooler Kit, Compatible With Ford Ranger 2.3L EcoBoost 2019+, Black Intercooler, Black Pipes

Direct-fit for 2019+ Ford Ranger 2.3L EcoBoost.
Dyno-proven max gains of 13.6 wheel horsepower and 13.9 lb-ft of torque when combined with Mishimoto intercooler pipes.
Intercooler increases flow by 18.6% over stock intercooler.
Intercooler pipes improve flow by 25.6% on the hot side and 16.6% on the cold side.

Made from high quality polyester and pure silicone materials to prevent increased temperatures in the intake charge caused by excess radiant heat in the engine bay..
Resistance Temperature Range: Withstands operating temperatures from -76F to +428F degrees fahrenheit..
Pressure Range: 0.6-1.2MPa, surface by smooth finishing..
Features:It is very easy to install, hand crafted high quality silicone hose with 4.5mm thickness..
For Intercooler,Turbocharger,Supercharger and other systems.

Compatible with Hyundai 2013-2017 Veloster 1.6L Turbo.
Material: 4-Ply Reinforced Polyester with High Temp Silicone. Max. Temp Rating: 350 deg. F (177 deg. C).
OEM fitment has all the correct bends and curves for a perfect fit replacement on your Veloster with stock intercooler and turbo setup. No cutting or trimming is required..
HPS 100% Stainless Steel T-Bolt Clamps are included for easy installation.
Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition.

Brand New Aftermarket OE Replacement : Meets or exceeds OE standard quality and performance requirements..
2003 2004 2005 2006 2007 Fits for Ford F250 F350 F450 F550 Excursion.
Main Material: Stainless steel and silicone.

Powder-coated for heat resistance, 3-Piece tube set for perfect fitment and maximum flow, These Hot -Side Tubes direct heated air from the turbos to the intercooler with less restriction.
2.5" Mandrel-Bent Powder-Coated Stainless Steel, for improved flow to intercooler.
this tube upgrade combo outflowed the stock tube by 18 percent and resulted in a maximum gain of 9 horsepower and 11 lbs. X ft. of torque as verified by in-house Dyno.
These intercooler tubes works with aFe or OE Intercooler, High quality clamps and silicone couplings Included for a perfect fit and strength.
All necessary hardware included for a hassle-free installation, This system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
This item is not for sale in California/Non CARB compliant.

This will fit: 2008 2009 2010 2011 2012 2013 Subaru WRX / 2008 -2013 STI (all turbo models) 7 x pieces polish aluminum pipe set up 7 x polyester reinforced High temperature silicone hose 1 x overflow reservoir 1 x reinforcement beam bracket 14 x T-Bolt Clamp 1 x Project intercooler.
INTERCOOLER SPECS: bar & plate design for better cooling efficiency max horsepower capacity: 400-500+hp core length: 25" core height: 9.5" core thickness: 3.5" inlet / outlet size: 2.5" end to end length: 35".
note: this intercooler fit both wrx and sti, so therefore there will be extra pipe left if you were to use it for the wrx, vice versa. but please keep the extra pipe if you are planning to use it or sell it to sti owners, vice versa. also if using this on sti, customer must us a different bov then stock, such as turbo xs..
note: this intercooler kit will retain the factory fog lights for both sti and wrx..

10 Blades 12V 80W radiator engine cooling fan with mounting kit.
Fitment: Truck/Van/Trailer/RV/Pickup etc.Any Radiator Depending on Size.
Aids to Cool the Entire Engine Bay, including Radiator, A/C System, Intercooler, Oil System, and Transmission.
Easy direct installation, require NO modification Warranty: 3 Year.
How to choose the correct fan?Step 1:Confirm the width and depth of your radiator Step 2:Compare the fan diameter and depth with radiator Step 3: Choose the right size fan ATTENTION:It can be installed only if the diameter of the fan is smaller than the width of radiator! Make sure the depth of the fan is smaller than the gap of radiator and other parts!.

Great for custom fabrication project such as DIY air intake, cooling systems and turbo intercooler piping setup.
Commonly used in industrial, automotive, marine and aerospace industry.
Great for custom fabrication project such as DIY air intake, cooling systems, turbo intercooler piping.

Ideal replacement - this intercooler hose matches the fit and function of the original equipment hose.
Greater durability - this intercooler hose ends are made of stainless steel instead of the original equipment plastic to better withstand high temperatures.
Complete repair solution - this intercooler hose includes new end clamps required to complete installation.
Quality tested - this part has undergone try-on and material testing to ensure a quality fit and long service life.
Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

compatible with Ford Focus ST 2013, 2014, 2015, 2016, 2017, 2018.
Larger Intercooler Provides More Efficient Cooling Power Equals More Power.
With Wind Deflector To Tunnel Air Into The intercooler.
Instant Horsepower And Torque Gain By Replacing Factory Intercooler.
Included Hardware For Direct Bolt On Installation.
No Install Instructions, Install Perform By Experienced Professional Installer Is Recommended..