ReviewsEngine Load Leveler

Heavy Duty Leveler Legs w/Lock Nuts - Leveling Feet for Furniture, Cabinets, & Workbench - 4 Pack

  • HEAVY DUTY - Made from 14 ga. (.080") steel. Load capacity is 2,000 lbs. per leg.
  • INTEGRAL LEDGER - Ensures that the load is carried by the leveler, not the screws.
  • LOCK NUTS INCLUDED - An absolute MUST for the workshop or garage, especially if any vibrating machinery is involved..
  • FREE SPINNING FOOT - Compensates for irregular floors. Polyethylene cap protects floors as it keeps moisture away.
  • YOU GET - 4 Legs, 16 Installation screws (#10 x 3/4"), 5mm hex wrenchDescriptionGot a 8,000 lb. workbench that needs leveling?... Read On!.
  • D.H.S. is pleased to offer a leveler that's tough as nails, but as easy to install as it is to adjust..
  • Housings are made from 14 ga. (.080"), zinc plated steel. Each has a 7/16" wide ledger that hooks under the cabinet. This ensures the load gets carried directly on the leveler, not the screws. BTW the screws we provide are no joke. They're 3/4" long #10 Philips head (nickel plated), perfect for supporting a bookcase with plywood sides or a workbench with 4 x 4 legs..
  • The legs have a 10mm dia. (a heavy 3/8") shaft that adjusts from 0" to 2-1/2". The feet are 1-1/4" dia. and spin freely on the threaded shaft. This allows them to tilt if your floor is really bad. Adjustments are easier too, as y....
Check Stock

KGDJS Camper Levelers 2 Pack - RV Leveling Blocks for Travel Trailer Include 2 Curved RV Levelers with 2 Camper Wheel Chocks, 2 Mats,1 Level,1 Bag, Heavy Duty Leveler Works for Camper Up to 35,000 LBs

  • ✔【Makes Leveling the RV Easily】 No more guessing how many rv leveling blocks to use. The rv leveling system can level your trailer in 5 minutes. Easily level your trailer any increment from 1/2 inch up to 4 inches. Each RV leveler is roughly 6" wide by 16" long. Used for tires no bigger than 32" diameter.
  • ✔【Heavy Duty Leveler Construction】 The camper levelers are built with a high-performance polymer to last a lifetime. Our rv levelers works with any trailer that weighs up to 35,000 lbs and with tires up to 32" diameter. Unlike other camper leveler that snap in half under 35,000 lbs of load, the honeycomb internal structure makes the rv levelers as solid as a rock that does not eventually break or compress under the weight of the trailer like other levelers do that are made of HDPE or PP.
  • ✔【Fast & Precise Leveling】 You only need one camper leveler per axle on one side of the trailer. With the rv blocks for leveling, you don't need to level both sides of the trailer - only put them on the low side. Make trailer leveling a fast and precise task with the use of a T-type level.
  • ✔【Non-slip and Safety】 This rv leveling blocks come with two curved rv levelers and two blocks. Both have honeycomb internal structures to enhance surface con....
Check Stock

Adjustable Feet Levelers, Heavy Duty Adjustable Legs for Furniture, Large Furniture Levelers, T Nut Levelers Table Adjustable Feet 3/8-16 Thread (8 Pack, Black)

  • {Wide Application}: The leveling feet adjustable can be used on any furniture leg to help it level the same height, such as tables, chairs, kitchen cabinets, and sofas. No matter at home or workplace that needs to be leveled or adjusted, it can be quickly solved by this furniture leveler..
  • {Flexible Adjustment}: The heavy-duty furniture leg levelers help to adjust the height of the furniture without affecting the appearance, so as to adjust the balance or increase the height. Diameter 1/2” Thick Base and Fully Adjustable Height from 3/4” to 1 3/4” for Maximum Support and Adjustability. The 3mm thickness felt pad with heavy-duty self-adhesive perfectly protects the floor..
  • {Clever Installation}: First drill a hole with a width of 0.55 inches, use a hammer to hammer in the inserted t-nut, and then screw the leg leveler to the desired position to complete the adjustment. And for furniture legs with existing 3/8"-16 thread, simply screw in the leg leveler to adjust the height..
  • {Package Included}: 8 × T- Nut Kit, 3/8”-16 Thread. 8 × 0.1'' thickness Felt Pads. adjustable furniture feet.
Check Stock

OwnMy Heavy Duty Adjustable Leveling Feet Hexagon Nuts Lock Furniture Legs Levelers for Furniture, Table, Cabinets, Workbench, Shelving Units and More

  • Heavy Duty adjustable leveler feet can level your uneven floor or furniture easily. Let's get rid of a wobbly table. Can adjust level in your need to avoid furniture be corrode in damp.
  • More Stability -The lip on the bottom design so the weight can be scattered, helps with the overall support isn't bearing totally on the screw connections.
  • With black rubber feet caps for grip, keep it solidly in place and not to damage your flooring, also protect from moisture. each leveler has a load-bearing capacity of 2000 pounds.
  • Perfect for cabinets, tables, workbench, support table or shelving units for a busy work area or garage, etc. Package includes: 4 x furniture feet, 16 x Screw, 1 x hex wrench, 1 x open-end wrench..
  • Dimension:M10 Thread, adjusts height from 0" to 2" feet caps Diameter:34mm.
Check Stock

[LOSCHEN] 8PCS Heavy Duty Adjustable Leveling Feet for Furniture,Hexagon Nuts Lock Furniture Legs Levelers,for Table, Cabinets, Workbench,Shelving Units and More

  • ...se are 8heavy gauge, Each plated steel furniture legs can be fine-tuned until they are perfectly level to the height you want. That help you adjust and level your table, cabinets, workbench, shelving units, bookcase and more.Holds Up to 400kg/880 lbs. Made of high quality steel with a 100kg/220 lbs capacity per leg leveler(Real Data)..
  • 【L-SHAPED MOUNTING BRACKET】Wide ledger,allows the mounting bracelet hooks onto the bottom edge of furniture to distribute the weight for better support and stability.Ensures the cabinet load is carried by the leve.
  • 【ADJUSTABLE FURNITURE LEVELER LEGS】The leveling feet have heavy 3/8″-16 (10mm) dia shaft that adjusts height from (2cm)0.78″ to (6cm)2-2/5″. With the wrench lock nut, you don’t have to worry about the bottom will fall off.Free spinning foot design compensates for uneven/ irregular floors. Rubber cap protects the carpet and floor and block moisture from getting to the foot,the floor surface no longer leaves rust spots..
  • 【PROTECTING FURNITURE】May be adjusted to reduce shock, vibration, tilting, and more. Helps with uneven floors.Often used as adjustable feet for workbench and furniture on any uneven surface. Helps Lift furniture and prevent it from getting damp.These heavy duty leveler legs he....
Check Stock

Wilton Adjustable Cake Leveler for Leveling and Torting 12 x 6.25-Inch

  • READY, SET, BAKE: This Wilton adjustable cake leveler is the quick and easy way to create even cake layers, consistent in height. The sturdy....
  • CONVENIENT: Measure the height you need on the Wilton cake leveler, starting from the feet up.
  • position wire into notches at desired height.
  • PERFORMANCE: The plastic feet on the Wilton cake leveler provide stability to keep an even cut all the way through, making this small leveler perfect....
  • CARE INSTRUCTIONS: This Wilton cake leveler is dishwasher safe.
  • however for best results, wash in warm, soapy water before first and after each use.
  • INCLUDES: 1 cake leveler, dimensions: 12 in (30.4 cm) wide and 6.25 in (15.8 cm) high.
Check Stock

Equal Rights, Equal Lefts [Explicit]

  • Powerful DuroMax Engine: the XP12000EH is powered by a DuroMax, 457cc OHV engine..With Gasoline : Peak Wattage - 12,000., Running Wattage - 9,500., Running Amperage at 120V - 79.17., Running Amperage at 240V - 39.58., Runtime at 25% Load - 19., Runtime at 50% Load - 8With Propane : Peak Wattage - 11,400., Running Wattage - 9,025., Running Amperage at 120V - 75.21., Running Amperage at 240V - 37.6., Runtime at 25% Load - 14., Runtime at 50% Load - 7Please read the detailed safety instructions in the manual before operating..
  • Dual fuel technology: the ability to run on propane or gasoline allows the freedom and flexibility of fuel choice. Protects your investment by automatically shutting the generator off when it senses that the oil is low.
  • Plenty of power: with 12,000 starting watts and 9, 500 running watts, This unit can handle heavy loads from lights and a refrigerator to a home air conditioner and high amperage power tools..
  • Maximum power: with DuroMax MX2 technology, get the maximum power from each of the 120 volt receptacle. Choose between operating the generator at both 120 V and 240 V Simultaneously, or at 120 only with full power..
  • Powering everyone anywhere: like all DuroMax generators, the XP12000EH is EPA and CARB approved For use in all ....
Check Stock

34 1/2' Hafele Table Legs Set of 4, Steel, Black

  • Leg screws into the steel square mounting plate with an M10 bolt.
  • Plastic levelers are pressed-in, they can be removed and pounded back in if legs need to be cut.
  • 220 lbs per leg (100 kg) Static load bearing capacity.
  • 34 1/2" High, including the mounting plate and the leveler.
Check Stock

Johnson Level & Tool 1610-2400 Eco-Tech Bamboo Level, 24\

  • ROBUST LEVELER: A perfect pick for the professionals at work, this leveler features bamboo construction with aluminum gauging edges that promise high durability..
  • ACCURATE RESULTS: The EcoTech leveler has an EZ clean coating that resists mortar adhesion for unparalleled performance..
  • SMART DESIGN: The bamboo leveler has curved vials that support extra-smooth bubble travel for accurate readings..
  • HIGHLY DURABLE: The wood leveler has unbreakable vial windows that add to its lifespan, resisting the abrasive outdoor impacts..
  • IDEAL APPLICATIONS: The 24 in. Eco-Tech Bamboo Level is ideal for masonry work..
Check Stock

Johnson Level & Tool 575 Structo-Cast Line Level, 3\

  • DURABLE LEVELER: Boasting a heavy-duty Structo-Cast construction for unparalleled performance, the leveler has a durable impact-resistant vial for optimum results effortlessly..
  • PRECISE DESIGN: The surface leveler features a smart design that reduces the line sag, providing accurate readings every time..
  • HIGHLY FUNCTIONAL: The lightweight leveler has unrestricted hooks for easy movement on the line, making it conveniently accessible for you..
  • IDEAL APPLICATION: The heavy-duty leveler is ideal to use for masonry, landscape, and sheet metal work..
  • PRODUCT SPECIFICATIONS: The 3 in. line level is proudly made in the USA..
  • Returns will not be honored on this closeout item.
Check Stock

BOYISEN Camper Levelers 2 Pack – RV Leveling System Ramp Kit, Improved Non-Slip Design, Support Two Axles, Up to 35,000lbs, RV Leveler for Travel Trailer Faster & Easier Than Camper Leveling Blocks

  • IMPROVED ANTI-SLIP SYSTEM – BOYISEN RV Levelers not only add anti-slip lines on curved levelers and chocks surface to enhance friction, we also add anti-slip jointing system for better fitting, with anti-slip mats, our Camper leveling system will stay solid still while backing your campers or trailers.
  • SUITABLE FOR DUAL AXLES NO TRIM NEEDED – BOYISEN RV wheel levelers improved its construction, make it fits two axles without trimming. The length is shorter than others, but the construction is improved so as to support vehicles up to 35,000lbs, level increment is 1/2 inch up to 4 inches, support wheel up to 32” diameters.
  • FAST & PRECISE LEVELING – Compare to RV leveling blocks by move your camper or trailer back and forth, using BOYISEN RV leveler and block kit, just simply drive your vehicle on the curved leveler till level, choke and done. Avoid the hassle of piling blocks or blanks, not to mention worrying blanks may flying out to hurt somebody.
  • PORTABLE & COMPACT – BOYISEN Leveler comes in a storage bag. We provide a customized storage bag with handle to store and carry them, much easier for storage than leveling blocks. A better option for campers and travel trailers, save your trouble from a uneven camping terrain.
Check Stock