ReviewsEngine Mount Kit

NEW SOUTHWEST SPEED TUBULAR TRANSMISSION CROSSMEMBER AND POLYURETHANE MOUNT FOR 1955-1957 CHEVY WITH POWERGLIDE, TURBO TH 350, TH 400, 700R4, MUNCIE, SAGINAW, 3 & 4 SPEED, TRIM-TO-FIT TRANSMISSION MOUNT WITH HARDWARE, TRI-5, BEL AIR, 150, 210, NOMAD, SEDAN DELIVERY, DELRAY

...fortunately, It Won't Work With Any Of The Convertible Frames That Have The X-Braced Frame, That Encases The Drive Shaft..
This Crossmember Will Also Work With GM Manual Transmissions, Including Later Model Muncie & Saginaw 3 & 4 Speed Manual Transmissions, And Allows The Use Of Bellhousings That Don't Have The Rear Engine Mounts On The Bottom Of The Bellhousing. This Is Extremely Helpful When You Are Trying To Install Newer Model Engine And Transmission Combinations In The 55-57 Chevy. This Crossmember Moves The Rear Engine/transmission Mounting Location From The Bottom Of The Bellhousing To The Tail Housing On The Transmission. | * This Transmission Crossmember Kit Includes The Polyurethane Transmission Mount, Which Offers Added Strength Without The Harshness Of A Solid Mount, Making It A Smart Upgrade Over Traditional Rubber Mounts. | * This Crossmember Is Not A Universal Fit Unit. | * This Is A Direct Bolt-In And Also Increases Exhaust Pipe Clearance In Critical Areas..
Kit Includes: Southwest Speed 1955-1957 Chevy Tri-5 Tubular Auto/Manual Transmission Crossmember (# 400-7084) | * Adjustable Mounting Brackets | * Made From Heavy Gauge Steel Tubing | * Includes All Hardware To Mount Crossmember | * Black Powder Coated To Resist Corrosion | * Southw....

Check Stock

Oil Pressure Gauge Adapter, 1/8in NPT Female to M10x1.0 Male Reducer Oil Pressure Gauge Adapter Replacement Black

... FOR ANY OCCASION. If you have other nice chrome pieces on your ride, this gauge will feel right at home and a must-have..
Measurements: Gauge face (w/ bezel) - 1.66" (42.25mm) Gauge Case - 1.62” (41mm) Gauge Depth ~ 1” (25mm) Fitment: Fits (70-84 Shovelhead) (84-99 Evolution) and (38-69 & 84-91 Big Twin Models) Engines ONLY. Fittings allow for a FLAT MOUNT (or) 45 Degree Mount depending on the application. Triple-chromed / Brass INTERNALS. 1/8 NPT main Male Fitting.
VMS RACING Oil Pressure Gauge Kit Provide you with a MORE ACCURATE OIL PRESSURE READING than Liquid Filled Oil Pressure Gauges. Liquid Filled Gauges tend to lose the liquid due to Engine Vibration. You eliminate that problem with this gauge. This Kit allows for accurately measuring Oil pressure in your Big Twin Engine. Proper Oil pressure is CRITICAL at full throttle to prevent premature engine wear. For this reason, you need to arm yourself with the best indicator of accurate information..
Compatible with HD Big Twin Models 84 85 86 87 88 89 90 91 1984 1985 1986 1987 1988 1989 1990 1991 BIG V TWIN V-TWIN Engine Motor Models . IMPORTANT NOTE: (70-84 Shovelhead) (84-99 Evolution) and (38-69 & 84-91 Big Twin Models) Engines ONLY.

Check Stock

Autobahn88 Engine Torque Damper Kit, compatible with Nissan Skyline GTR R33 R34 RB26DETT BCNR33 BNR34

Fitment compatible with Nissan Skyline GTR R33 R34 RB26DETT BCNR33 BNR34.
The Engine Damper mounts in between your vehicle's engine block and firewall to effectively control horsepower and torque. Keep your motor supported as you slam through those gears while adding a nice showpiece under the hood. Creates less stress to engine mounts, giving you more power to the wheel.
Reduce Engine damping and bumping. Increase Lifespan of your Engine Mount.
Made by aluminum. Includes all thick and strong mounting kit.
Direct Bolt On. No modification is required that can DIY in 30 mins.

Check Stock

Diesel Coolant Filtration System Filter Kit Compatible With 2003-2007 Ford Powerstroke 6.0L - Prevent Leaks Heavy Duty Improved Single Piece Hose Design

...s, We dont make any exceptions! Our Coolant Filtration System Compatible with Ford 2003-2007 is made with long-term use in mind which is why we use CNC machined billet 6061 aluminum to ensure long-term use to reliably bypass and filter small amounts of coolant while minimizing the number of containments to increase engine lifespan..
INCREASE ENGINE LIFE: It is commonly known that Ford 6.0L engines have extra solid particles left over from casting the engine which can clog your trucks factory oil cooler, EGR cooler, and other critical engine components..
MADE TO FIT: The mounting bracket mounts a precision CNC-machined 6061 aluminum filter mount and coolant filter to the passenger side radiator support area, an ideal location for easily removing the filter. This 6.0L coolant filtration system is routed in parallel with the flow path of your coolant system and allows a small amount of coolant to be filtered with each pass..
EASY INSTALLATION: If you are in the process of bulletproofing your 6.0L ,this Coolant Hose Kit will pair perfectly with the 6.0L coolant filter kit! This coolant filter kit installs in under 45 minutes with modifications necessary..
IMPROVED DESIGN: We included two brass ball valves with this kit to help make changing the filters a cle....

Check Stock

ZOZOMOTORS Dual Electric Fan Relay Kit Radiator Electric Fan Thermostat Kit Temperature Sensor Switch 185 On 175 Off, Automotive 40 AMP Cooling Fan Relay Switch Kit 4 Pin, Dual Electric Fan Wiring Kit

Easy to follow wiring diagram simplify wiring your dual electric fans. RED to 12VDC Positive Battery Terminal, COFFEE to Fan Positive, BLACK to Ignition, GREY to Sending Unit per wiring diagram. Direct replacement part fits 10, 12, 14, and 16 inch cooling fans.
Temperature switch turns on fan approximately at 185 Degrees and Off at 175 Degrees. The temp sensor has a 3/8 inch pipe thread, and a 1/2 inch adapter included.
This electric cooling fan thermostat kit comes with everything you need, includes 40A relay, wiring harness, thermostat switch, 3/8 inch to 1/2 inch adapter, inline fuse holder, 2 20amp fuse, 1 spade connector for the temp sensor, 8 ring terminals, and 4 wire connectors.
The thermostat supplied with this kit is OE style to mount in the cylinder head of the engine or any water jacket if needed. The thermostat MUST be grounded through the threads to the engine in order for it to work, and the engine MUST be grounded.
If you intend to mount high-profile fans, you could crimp or solder bigger wires to it. The 14AWG wires (15 amps) are not bigger enough for high amps draw.

Check Stock

Motor Engine Mounts Dual Height EF K Series Swap Kit for 88-91 Civic CRX EFK2 70A K20 K24 AWD

Poly Bushings are Performance Grade In Quality Controlled Manufacture.
- Track use/250-500 Rating(HP)./ Performance mount kit for K-series engine swaps into the 1988-1991 Civic/CRX.

Check Stock

WeiSen Gloss Black Adjustable Cruising Highway Footrest Foot Peg Mount Kit Compatible with 1991-2017 Harley Dyna FXD Model

Fitment: Fits 1991-2017 Harley Dyna FXD with Original Equipment mid-controls or Further Forward Mid-Control Kit P/N 50500386. (Will not fit models equipped with engine guards).
Gloss Black surface finish and heavy duty steel with Triple Plating Finish. (Copper+Nickle+Power Coated Black).
Condition: Aftermarket 100% Brand New. Superior quality and durable for rusting resistance and long service time. (Replace HD# 49002-98).
This kit are designed for comfortable highway cruising and great look. Come with two mounting hole for your foot peg position choice..
Package include: 1x Front Foot Peg mount Kit, Come with installation instruction. (Not included male-mount footpegs).

Check Stock

Holley 550-511K EFI Self-Tuning Master Kit

Breathe new life into your Small Block Chevy or Big Block Chevy engine with this easy-to-install fuel injection/distributor ignition kit.
Throttle body mounted ECU – no extra computers to mount or relocate.
Self tuning ECU means you don’t have to be a computer/tuning expert to enjoy EFI.
Precision machined shutter wheel designed for improved accuracy at extreme engine RPM.

Check Stock

Westinghouse Lighting 7784600 LED Schoolhouse Indoor/Outdoor Energy Star Ceiling Fan Light Kit, Oil Rubbed Bronze Finish with White Opal Glass

【Easy Installation】Every LED light engine is equipped with 3 wire nuts, and customers have two installation methods. One method is to use a center threaded screw type ceiling lamp to install, another way is to mount directly to a flat clamp base with magnet feet.
【Wide Applications】This LED light replacement kit can replace ceiling light, ceiling fan light, pendant light, thread type ceiling lamp, surface mount ceiling lamp, wall light.
【Energy Saving】Uses 24 watts while providing 2200 lumens of bright light. Replacing an incandescent light bulb with an LED ceiling light board saves 85% on your electric bills.
【3Color Changing Temperature】You can preset your preferred light color temperature before installation: warm white(3000K), cool white(4000K), or daylight(5000K).
【Dimmer 5-100%】The LED light engine retrofit kit compatible with most LED dimmers on the market, and realize the smooth adjustment of brightness from 5% to 100%.
【Long Lifespan】This round LED light panel replacement use high-end LED lamp beads longer service life. Lifespan 50,000 hours which means ceiling fan light kits can be used for 17 years based on 8 hours/day.

Check Stock

BLACKHORSE-RACING 14" Universal Electric Radiator Cooling Fans + Thermostat Relay & Mount Kit

√ COOLING FAN: 12V 90W 14 Inch radiator engine cooling fan with mount brackets and tie straps kit. Maximum Fan CFM=900CFM, Maximum Fan RPM=2000+10% RPM.Fan Diameter: 14.72".Thickness=2.64"..
√ THERMOSTAT KIT: 180'F turn-on temperature, 165'F turn-off temperature. 3/8" NPT thread-in brass probe w/ 1/2" NPT adapter included.
√ DESIGN: Slim design provides excellent engine bay clearance.Good heat resistance and corrosion resistance ensure a long service life for the electronic radiator.Blade and wiring can be reversed to make the fan an air pusher..
√ HIGH TORQUE MOTOR: Features sealed ball bearing and fully balanced blades that ensure low noise levels and long life of smooth operation.
√ Application: Universal,For radiators, oil coolers, transmission coolers, condensers and more..

Check Stock

Hisoo 2 Pack LED Light Engine Retrofit Kit, 6inch 24W 2200Lm, 3CCT 3000K/4000K/5000K Dimmable, Ceiling Fan Light Kits, LED Light Engine for Ceiling Light, Ceiling Fan Light, Pendant, Lantern

【3 Color Changing Temperature】You can preset your preferred light color temperature before installation: warm white(3000K), cool white(4000K), or daylight(5000K).
【Dimmer 5-100%】The LED light engine retrofit kit suitable for most LED dimmers on the market, and realize the smooth adjustment of brightness from 5% to 100%.
【Easy Installation】Every LED light engine is equipped with 3 wire nuts, and customers have two installation methods. One method is to use a center threaded screw type ceiling lamp to install, another way is to mount directly to a flat clamp base with magnet feet.
【Wide Applications】This LED light replacement kit can replace ceiling light, ceiling fan light, pendant light, thread type ceiling lamp, surface mount ceiling lamp, wall light.
【Energy Saving】Uses 24 watts while providing 2200 lumens of bright light. Replacing an incandescent light bulb with an LED ceiling light board saves 85% on your electric bills.

Check Stock