ReviewsEngine Mount Thread Size

GlowShift Oil Filter Sandwich Plate Thread Adapter - 20mm x 1.5 Thread - Install up to (4) 1/8-27 NPT Oil Pressure & Temperature Sensors - Includes O-Ring & Port Plugs

GlowShift Oil Filter Sandwich Adapter Allows Users to Install (4) 1/8-27 NPT Oil Pressure and/or Oil Temperature Sensors to the Oil Filter of Your Vehicle - Installs Between the Engine Block & Oil Filter.
Features (1) Aluminum Sandwich Plate Adapter with (4) 1/8-27 NPT Female Thread Ports, (1) M20 x 1.5 Thread, (4) 1/8-27 NPT Flush Mount Port Plugs & (1) O-Ring for a Leak-Free Seal.
Note: This Oil Filter Adapter is Only Compatible if the Gasket Diameter of Your Oil Filter is 3" or Less.
Includes Step-By-Step Installation Instructions.
GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.

Check Stock

186F 9HP Diesel Engine 4 Stroke Single Cylinder 406CC Forced Air Cooling Diesel Engine for Agricultural Machinery

【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..

Check Stock

Mishimoto MMINT-F2D-08SL Performance Intercooler Compatible With Ford 6.4 Powerstroke 2008-2010 Silver

63mm/2.5" Turbo Intercooler---- Universal Front Mount Turbo Intercooler with 63mm/2.5in inlet diameter. Model: XH-ZL238-SL. 100% brand new, please confirm whether the product is suitable before purchasing.
Cooling of Pressurized Air---- The front mount intercooler can reduce the intake temperature of the engine, improve the air exchange efficiency of the turbocharged engine, reduce engine fuel consumption. Excessively hot air will reduce the power of the engine.
High Performance---- This front mount intercooler adopts bar and plate design, reasonable structure, professional manufacturing, more stable and reliable performance. Timely replacement of old or damaged turbo intercooler for better cooling performance.
High Quality Aluminium Alloy---- The front mount intercooler is made of high-quality aluminium alloy material, which is wear-resistant and durable, not easy to damage and has long service life. The manufacture of the turbo intercooler meets the strict quality requirements.
Easy to Install---- Features mounting points at the top and bottom of the intercooler, easy to install. Ideal and direct replacement for old or damaged front mount turbo intercooler, dependable to use.

Check Stock

Vinco - Glukokine 60 tabs

Fitment: This Exhaust Manifold Bolt Set Compatible with Dakota V8 4.7L Club Cab 2WD 05 06 07 08 09 10 11 , 1500 V8 4.7L Laramie Quad Cab 2WD, Laramie....
Interchange/ Part Number: 6505316AA, 6507746AA, 6508219AA, 6508220AA, Specification: Thread Size: M6-1.0, Thread Size: M8-1.25, Material: Steel,....
Package included: 4 Studs(2 Long & 2 short), 4 Bolts and 4 Nuts.
Engineered from premium materials to provide exceptional service life and reliability.
Designed to withstand the harsh conditions in the modern engine compartment.
Advanced manufacturing technology ensures durability and optimum operation....

Check Stock

125CC Engine Start Motor Semi Auto 3 SPEED w/Reverse and Wiring Harness For Go Kart ATV QUAD BUGGY 4 WHEELERS COOLSTER USA STOCK

【Main Parameter】ENGINE SIZE : 125CC GEAR SYSTEM : 3 FORWARD.
REVERSE Type : Horizontal, single-cylinder, 4-stroke, air-cooled Start Method : Electrical Start Bore x Stroke : 52.4 × 55.5 mm, 119.7 mL Top Engine Mount : 92mm Bottom Engine Mount: 82mm Bolt to Bolt :152mm (6") Compression ratio : 9.0: 1..
【125CC Motor Engine 】A high performance engine, perfect for those comfortable with faster engines and have a desire to get up and go..
【Wiring】1. Five wires (Plug): For gear indicator 2. Yellow wire: For storage battery 3. Pink (or Yellow) wire: For storage battery 4. Black & Red wire: For signal trigger 5. Green wire: For grounding 6. Blue & White: For trigger coil.
【Application】Compatible with Ducar, Lifan, Gy6, Thumpster, Thumbstar, Go kart, Quad, Dirt bike, ATV, Pit bike, Dirt bike, Buggy, Pocket rocket etc..
【100% Service Satisfaction】USA STOCK, delivery time need about 5-8 days. If you have any problems with the purchasing, please feel free to contact us. MONIPA are always at your service..

Check Stock

Viewer Questions: Fuel System Requirements When Converting From Gas to Diesel

【Accurate Fuel Injection】Air-cooled diesel engine four-stroke single cylinder adopts direct injection fuel system with good atomization to achieve accurate fuel injection and save fuel for you. Commodity parameters:Crankshaft: Horizontal,Size: 13.2 * 14.96 * 16.3 inches,Net weight : 59.5 lb,Material: aluminum alloy box,System: direct injection fuel system,Rated power: 3.6kw,Displacement (L): 0.247,Fuel tank volume (L): 2.5,Engine speed: 3600r / min..
【Speed Control Handle】Diesel motor engine can be positioned at any speed, equipped with throttle cable mount, you can install the throttle cable as needed..
【Fast Heat Dissipation】4 Stroke single cylinder air cooled vertical engine has an air-cooled diesel engine made of aluminum alloy with reinforced and thickened treatment, which makes it have good heat dissipation and protect the machine..
【Small Space Occupation】Tiller crude oil engine has compact structure and small size, occupying less space than other engines..
【Wide Range of Application】Heavy duty single cylinder air- cooled diesel motor engine is suitable f....

Check Stock

TIME-SERT 5/16-18 SAE Thread Repair Kit

This Thread Repair kit is Used to Repair or Replace Damaged or Stripped Internal Screw Threads..
Ideal for Restoring Damaged Threads, Suitable for Engine Repair and Other Automotive Applications.
The kit Has Altogether 131 Pieces, All Made According to Professional Standard..
Lt Has One HSS Tap for Each Size, One HSS Drill for Each Size, 2 Insert Tools for Each Size, Thread Inserts for Each Size, All Come Complete in a Handy Storage Case..
All Tools Were Packed in a Convenient Steel Carrying Case, Ease and Fast in Collecting and Placing the Tools..

Check Stock

Subaru 75W90 Extra S Gear & Transmission Fluid - 5 quart Bottles Sti Wrx Genuine SOA427V1700 X5

Genuine Engine motor mount bracket set for your Turbo..
LH Mount bracket 41031AA290 X 1 RH Mount bracket 41031AA281 X1.
These are genuine OEM Subaru Engine Mount Plate part #'s are 41031AA281 & 41031AA290. These are needed to install the Torque Solution engine mounts in Subaru WRX 2006-2015 and STI 2006-2016..
DIRECT Fits: 2002-2014 WRX EJ255 2002-2014 STI EJ257.
2004-2008 Forester turbo 2004-2006 Baja Turbo.

Check Stock

GlowShift Oil Filter Sandwich Adapter Compatible with GM Duramax Chevy Silverado GMC Sierra 2000-2013 - Install up to (4) 1/8-27 NPT Oil Pressure & Temperature Sensors - Includes O-Ring & Port Plugs

GlowShift Oil Filter Sandwich Adapter Allows Users to Install (4) 1/8-27 NPT Oil Pressure and/or Oil Temperature Sensors to the Oil Filter of Your Vehicle - Installs Between the Engine Block & Oil Filter.
Compatible with 2000-2013 Chevrolet Silverado & GMC Sierra Duramax.
Features (1) Aluminum Sandwich Plate Adapter with (4) 1/8-27 NPT Female Thread Ports, (1) 13/16-16 Thread, (4) 1/8-27 NPT Flush Mount Port Plugs & (1) O-Ring for a Leak-Free Seal.
Includes Step-By-Step Installation Instructions.
GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.

Check Stock

Neewer Tripod Leveling Base with Offset Bubble Level for Canon,Nikon,and Other DSLR Cameras with 1/4 Thread Tripods & Monopods with 3/8 Thread

Tripod Mount Thread Size: 3/8" female thread (bottom), 1/4" thread (attachment).
Lever Head only, camera and tripod not inculded.

Check Stock

Helicoil 5546-5 M5 x 0.8 Metric Coarse Thread Repair Kit

This Thread Repair kit is Used to Repair or Replace Damaged or Stripped Internal Screw Threads..
Ideal for Restoring Damaged Threads, Suitable for Engine Repair and Other Automotive Applications..
Sae&Metric: The kit Has Altogether 300 Pieces, All Made According to Professional Standard..
Lt Has One HSS Tap for Each Size, One HSS Drill for Each Size, 2 Insert Tools for Each Size, Thread Inserts for Each Size, All Come Complete in a Handy Storage Case..
All Tools Were Packed in a Convenient Carrying Case, Ease and Fast in Collecting and Placing the Tools..

Check Stock