ReviewsEngine Mount Upper Bracket

Bullshit Detector

  • ...Default green backlight will help to use it at night or dim place, you can set the backlight mode by always-on, OFF and automatical mode(OFF default, button to wake up) as request.
  • Red backlight will remind the engine RPM or TEMP exceed..
  • OTHERS ---- Easy to mount it on proper position by stick-on, screw-on and extra bracket(not include), one-wire wrapping of spark plug for signal detect (68.8inches, workable if shorten or extend) to work right away.
  • Battery capacity will be kept in good condition with insulation sheet during transport, it is repalceable.
  • LCD shutdown also can extend the lifetime in vacant time.
  • Reliable technical support and after-sales service(2 years)..
Check Stock

HS Power Black Roof Pillar Mount Brackets Kit for 50" Curved Led Light Bar FRC Compatible with 07-14 Toyota Tundra

  • Fitment: Compatible with 07-14 Toyota Tundra All Models.
  • Mounting Brackets For 50" Curved LED Light Bar. Custom Mounting Bracket Designed To Mount On Upper Windshield / A-Pillar. Compatible With Original Mounting Points. Come With Rubber Gaskets To Prevent Scratches On Your Vehicle..
Check Stock

BIG RED T32100 Torin Engine Hoist Shop Crane Accessory: Steel 3 Position Engine Leveler with Adjustable Handle, 3/4 Ton (1,500 lb) Capacity, Red

  • Engine leveler has a 3/4 ton (1,500 lb) load capacity and is made from rugged, top quality structural steel.
  • It's ideal for garage, workshop, and agricultural jobs.
  • Fully adjustable, with 3 position chain mount holes to accommodate various engine configurations.
  • Features (4) 14" length chains, each equipped with an L-bracket assembly.
  • Simply attach the chains to the engine and use the crank handle for quick and ease adjustments with the threaded shaft, which balances the load with ease.
Check Stock

Engine Upper Compartment Partition Panel Set of 3 51717169419 Fit for X5 X6 E70N E70 E71 E72

  • Reference OEM---- Replacing OE numbers of this engine upper compartment partition panel set for reference: 51717169419, 51717169420, 51717169421. Simple installation, no need complicated tools, convenient for using.
  • Separation Function---- The engine upper compartment partition is placed between the engine and the fan to isolate them, which is conducive to the heat dissipation of the radiator and prevent the residual heat of the engine body from affecting the heat dissipation effect.
  • Strengthening Thickness---- The engine upper compartment partition panel can prevent engine noise radiation and strengthen the strength of engine hood. The engine upper compartment partition adopts professional manufacturing process, with stable performance and good reliability.
  • High Quality Material---- This engine upper compartment partition is made of high-quality PP-BAS04-GF material, which is wear-resistant and durable, not easy to break and has long service life. The manufacture of the engine upper compartment partition meets the strict quality requirements.
  • Fitment---- 3pcs Engine Upper Compartment Partition Panel kit is suitable for X6 E71 M 2010-2012, for X6 E72 Hybrid 2010-2011, for X6 E71 35iX 2008-2010, for X5 E70 M 2010-2011, for X5 E70N 35iX 50iX 2011-2011, etc....
Check Stock

LOSTAR LS1 ECM ECU PCM LSX CNC Cut Engine Computer Mount Bracket Pcm Swap 5.3 6.0 LQ9 LM7 0411 C10 C-10

  • ✅Note: The ECM bracket utilizes the four small screws in the ECM body. Please confirm your ECM Is the same type as pictured. Hardware not included. ECM not included. Designed to mount to any flat surface, making mounting an LS ECM a lot easier on your swap project..
  • ✅Description: The 411 ecm is found in most 1999-2006 ls motors with either a blue and red plug or a blue green plug. The insides are different but bodies are the same. Lightweight and no burden to your auto..
  • ✅Material: 1.5mm Cold rolled plate. Made from high-quality materials, reliable performance and superior longevity. Lightweight and no burden to your auto. These will not rust or corrode..
  • ✅Package Includes: 2 x Cut Engine Computer Mount Bracket.
  • ✅1 Year Unlimited-mileage Quality Guarantee.
Check Stock

XFMT Vivid Black Front Batwing Upper Outer Fairing Compatible with Harley Touring Models 1996-2013 1997

  • You get everything shown in the picture( left and right side leg fairings with 6.5" speaker box pod ).
  • Fit For 1983-2013 Harley touring models FLT, FLHT, FLHTCU, FLHRC, Road King, Street Glide, Electra Glide, Ultra-Classic, Road Glide (except 98-09....
  • Also Fit For 1998-2009 FLTR by cutting off 2-1/2" the upper cap cover to clear the upper fairing bracket). Will not fit with Mustache Engine Guard..
  • PACKAGE INCLUDED:One Set Lower Vented Leg Fairings with 6.5" speaker boxes pods.
Check Stock

66/80cc Flying Horse Silver Angle Fire Bicycle Engine Kit - 2 Stroke

  • ...) and has a top speed of 25-35MPH (miles per hour) stock..
  • EASY DIGITAL INSTALLATION: This kit makes installation a breeze, it includes the universal mount necessary to install on most 26" wheel bikes (Mountain, Cruiser, Chopper, Road) with V styled frames. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1"). The rider only needs some basic hardware skills, tools, and around 2-3 hours for installation and fine tuning adjustments.
  • FUEL EFFECIENT: The BBR Tuning Silver Angle Fire 2-Stroke Engine Kit is extremely affordable and fuel efficient. Providing 100 – 150 miles per gallon..
  • INDUSTRY LEADING 6 MONTH WARRANTY: Backed by an industry leading 6 month manufacture warranty and lifetime support the BBR Tuning 66/80cc Engine Kit comes with the industries best support and a satisfaction guarantee.
Check Stock

Nilight Windshield Frame Mounting Bracket for 52” LED Light Bar and Pod Light on Wrangler JK 2007-2017, 2 Years Warranty

  • Fitment Type: Specially designed for JK 2007-2017 for easier light mounting. Upper windshield is to install 52” light bar, while the lower windshield is to install bottom-mounted small led pod lights, remains ample to adjust..
  • Upgrading reflector cup: the broad reflective plate on both sides allows multi-angle refraction, ideal for ambient illumination.
  • SIDE MOUNTING BRACKET: The sturdy bracket can firmly fix the light bar. Quakeproof when passing through rugged terrain.
  • High performance: IP67 waterproof rate, efficient cooling, die-cast aluminum alloy housing, over 30, 000 hours lifespan.
  • Simple Installation: Just peel the foam tap, stick them to the bracket, mount the bracket to the windshield frame with vehicles original factory bolts, and then use the mounting hardware comes with the light bar, to install the light bar on the bracket. (Note: If mounting hardware size from the light bar are not same as mounting holes size on bracket, you can use washers to make them fit).
Check Stock

RDX Punching Bag Bracket Adjustable Wall Mount Hanger, Heavy Duty Steel Coated Hanging Stand, Side Folding Movement, Home Boxing MMA Training Gym Fitness Indoor Outdoor Workout, Holds Upto 300lb

  • POWDER COATED STEEL BRACKET treated with special red oxide anti-rust formulation is durable enough to sustain prolonged sessions. 9kg heavy wall bracket is ideal for hanging punch bags and upper cut bags and more..
  • 300LBS OF WEIGHT BEARING capability makes the wall bracket a smart purchase.12 bolt points will ensure that the wall mount is securely placed and will effectively sustain any impacts..
  • HINGES allow sideways movement so you can have the perfect angle at your disposal. Reinforced construction makes the wall mount rugged and perfect for repeated use..
  • D-SHACKLE is in place for bearing the weight of the punch bag with ultimate ease. A collared pin allows swift removal of equipment..
  • COMES WITH ALL THE NECESSARY FIXINGS, enabling you to install it any place you like. Practice Boxing, Kickboxing and MMA with complete satisfaction..
Check Stock

Achla Designs C-21C Plated Flower Box, Window Flowerbox Planter, Large, Copper

  • ...ormy Nantucket Blue, classic garden Green, as well as a Copper Plated Finish. Copper Flower Boxes will develop warm natural patina over time that is a perfect complement to green foliage.
  • MOUNTING OPTIONS-COORDINATING HARDWARE is available for mounting all size boxes. For Large Flower Boxes use Achla Designs Scrolls Bracket (B-32) Wall Mount Bracket (SFB-03) and Clamp-On Bracket (SFB-03).
  • ADD CURB APPEAL-Nothing creates a more welcoming façade than colorful and lush plantings! Give your entry, upper windows, porch railings or balcony a lift with a windowbox garden..
  • CONTAINER GARDENING- Flower Boxes can go anywhere you want to garden in containers. Mount them on deck or porch handrails, use in stands on patio or deck surfaces. Grow a variety of interesting flowers, sculptural succulents, herbs and leafy salad greens for cutting, compact veggies, even strawberries..
Check Stock

XFMT Lower Vented Leg Fairings W/ 6.5 Speaker Box Pods for Harley Touring 1983-2013 Road King Electra Street Glide Ultra Classic

  • Condition: Aftermarket 100% Brand New and in good-working condition!.
  • Material: Made of High Quality ABS Plastic.
  • FITMENT: Fits 1983-2013 Harley touring models FLT, FLHT, FLHTCU, FLHRC, Road King, Street Glide, Electra Glide, Ultra-Classic, Road Glide (except....
  • Also fits 1998-2009 FLTR by cutting off 2-1/2" the upper cap cover to clear the upper fairing bracket). Will not fit with Mustache Engine Guard..
  • Package Included: 1 Set Lower Vented Leg Fairings with 6.5" speaker boxes pods.
Check Stock