ReviewsEngine Oil Flush 2

When The Roses Bloom Again

  • Easy way to clean and flush the oil systems of gasoline and diesel engines.
  • Neutral to seals and other materials installed in the engine.
Check Stock

Liquimoly 2249 5W-30 Special Tec LL, 5 L

  • Easy way to clean and flush the oil systems of gasoline and diesel engines.
  • Neutral to seals and other materials installed in the engine.
Check Stock

Replacement Engine Oil Filter - Compatible with Jeep Gladiator, Wrangler & Ram 1500 3.0L Vehicles - Replaces 68507598AA, 68498720AA - 2020, 2021 - 3 Liter Diesel Engines

  • Replacement Engine Oil Filter - The engine oil filter is designed to protect and capture harmful contaminants like carbon, sand, dust, and bits of metal that circulates into your engine. It filters the oil to prolong its life and to provide long lasting engine protection..
  • Compatible Replacement for Jeep & Ram Diesel 3.0L Vehicles - 2021 Gladiator 3.0L | 2020-2021 Wrangler 3.0L | 2020-2021 1500 3.0L | It is important to have clean motor oil because dirty oil can wear the oil pump’s machined components and damage the bearing surfaces in the engine. The oil filter helps remove pollutants from your car engine’s oil that can accumulate over time..
  • Replaces Part# 68507598AA, 68498720AA commonly found on popular Gladiator, Wrangler or 1500 models including year models 20, 21. If you are experiencing acceleration problems, metallic noises under the hood or low oil pressure your oil filter might need to be replaced..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Oil filter should be replaced every time the oil ....
Check Stock

JohnDow Industries JDI-20COMBO-B Steel 20-Gallon Drain Evacuator w/Bowl

  • Easy way to clean and flush the oil systems of gasoline and diesel engines.
  • Neutral to seals and other materials installed in the engine.
Check Stock

MOTOOS 80CC 24' 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit (Red)

  • Single Cylinder, Air-Cooling, 2-Stroke Gasoline Engine. This 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike, which allows you to enjoy riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter..
  • The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26" and 28" bicycles with V-frames. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1")..
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check Stock

4HP Outboard Motor Boat Engine, 4 Stroke Heavy Duty Outboard Motor Fishing Boat Engine with Water Cooling System (4-Stroke 4HP)

  • ①4 STROKE 4 HP OUTBOARD MOTOR ENGINE:The JET PUMP 4HP 4 Stroke Outboard Motor Boat Engine provides all the power you need for motoring in a small craft. This engine does that as well as providing fuel efficiency second to none and a newly redesigned carrying handle and holding grip make it convenient to transport!.
  • ②DETAILS: Model: 4.0 horsepower jet pump.
  • Refueling method: No. 92 unleaded gasoline is recommended..
  • ③SIZE INFORS: Packing volume: 95*42*29cm/37.4*16.5*11.4inch.
  • Gross weight/net weight: 13(28.66lb)/9.7kg(21.3lb).
  • Recommended engine oil: four-stroke engine oil.
  • ④ATTENTION:Use four-stroke special engine oil (automobile and motorcycle engine oil).
  • Add oil according to the scale indication on the oil dipstick (the rotating cover),do not add more or less.
  • The fuel tank of the four-stroke outboard engine can only be filled with....
Check Stock

68436631AA Fuel Filter Compatible with 2019-2022 Ram 2500 3500 4500 5500 6.7L Diesel Engine,Ram 1500 3.0L V6 Eco Diesel Frame Chassis Mounted,Jeep Wrangler/Gladiator 3.0L V6 Diesel #PF46152(4Pcs)

  • Replacement Engine Oil Filter - The engine oil filter is designed to protect and capture harmful contaminants like carbon, sand, dust, and bits of metal that circulates into your engine. It filters the oil to prolong its life and to provide long lasting engine protection..
  • Compatible Replacement for Jeep & Ram Diesel 3.0L Vehicles - 2021 Gladiator 3.0L | 2020-2021 Wrangler 3.0L | 2020-2021 1500 3.0L | It is important to have clean motor oil because dirty oil can wear the oil pump’s machined components and damage the bearing surfaces in the engine. The oil filter helps remove pollutants from your car engine’s oil that can accumulate over time..
  • Replaces Part# 68507598AA, 68498720AA commonly found on popular Gladiator, Wrangler or 1500 models including year models 20, 21. If you are experiencing acceleration problems, metallic noises under the hood or low oil pressure your oil filter might need to be replaced..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Oil filter should be replaced every time the oil ....
Check Stock

SUNROAD 80cc Bicycle Engine Kit 24″ 26″ 28″ 2-Stroke Motorized Bicycle Petrol Gas Engine Kit Red

  • Single Cylinder, 2-Stroke Gasoline Engine. Air-Cooling,Equipped with the 2-stroke 80cc single cylinder gasoline engine, our bike motor kit is suitable for most bikes with v-frame. It will better upgrade your regular bike to a motorized bike and let you enjoy the fun of riding..
  • The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26″ and 28″ bicycles with V-frames. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″)..
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check Stock

GlowShift Oil Filter Sandwich Plate Thread Adapter - 20mm x 1.5 Thread - Install up to (4) 1/8-27 NPT Oil Pressure & Temperature Sensors - Includes O-Ring & Port Plugs

  • GlowShift Oil Filter Sandwich Adapter Allows Users to Install (4) 1/8-27 NPT Oil Pressure and/or Oil Temperature Sensors to the Oil Filter of Your Vehicle - Installs Between the Engine Block & Oil Filter.
  • Features (1) Aluminum Sandwich Plate Adapter with (4) 1/8-27 NPT Female Thread Ports, (1) M20 x 1.5 Thread, (4) 1/8-27 NPT Flush Mount Port Plugs & (1) O-Ring for a Leak-Free Seal.
  • Note: This Oil Filter Adapter is Only Compatible if the Gasket Diameter of Your Oil Filter is 3" or Less.
  • Includes Step-By-Step Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

X-PRO Long Case 150cc 4-stroke GY6 Air cooled Moped Scooter Engine with CVT Automatic Transmission, Electric/Kick Start…

  • 【Parameters】Engine type: Gy6 single-cylinder four-stroke, engine oil type: Sf15w-40 without oil, carburetor type: pd24j, carburetor type: horizontal vacuum carburetor, spark plug type: a7tc, ignition type: cfw, cooling: air cooling, oil number: >=87#, compression ratio: 9.2:1, clutch: shoe type automatic centrifugal dry clutch, transmission: cvt, ignition system: Cdi, starting method: electric/kick.
  • 【Specification】 Displacement: 150cc, maximum power (Kw/R/Min): 6kw/7500r/Min, rated power (Kw/R/Min): 5.2kw/7000r/Min, maximum torque (Nm/R/Min) : 7.6nm/6500r/Min, minute steady idle speed 1600±150r/Min, piston diameter: 57.4mm, piston stroke: 57.8mm, bore and stroke 2.26" X 2.28" (57.4mm X 57.8mm), lubrication capacity: 0.26 gallons (1200ml), cylinder working volume: 0.03 gallons (149.6ml), speed: 8 poles.
  • 【Features】 Large-flow oil pump: reduce friction pair wear and prolong engine service life.
  • aluminum cylinder head and cylinder block: improve heat dissipation, reduce weight, and increase engine torque.
  • crankshaft: engine low-speed high torque, crankshaft connecting rod adopts large diameter bearing, Increase the reliability of the bearing.
  • lubricating oil filter: help to remove solid pollutants in the lubricating oil, greatly reduce the wea....
Check Stock