ReviewsEngine Oil Pump Pressure Regulator Valve

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • ...ery easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
  • Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount of liquid. Stable base avoids dumping.
  • The main hose is 80" long, with a quick plug on one side to connect the container, and a quick coupler on the other side to connect the dipstick tubes or ATF adapters. There is a ball valve on the quick coupler to control the fluid flow, very convenient. Please note, there is no instruction in the kit, please refer to your vehicle operation instruction and following product description to operate. Your satisfaction and recognition are always what we pursue, please contact us to resolve any issue.
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...y of 1L, and can be used for 340 times underwater breath when full inflated, it's about 15-20 minutes(the diving time determined by the breathing rate). This mini scuba tank only weight for 5.07 lb, with the equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
  • ✅【PERFECT COMPATIBILITY】 : The scuba tank's inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
  • when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices.
  • ✅【HIGH QUALITY MINI SCUBA TANK】: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve an....
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...y of 1L, and can be used for 340 times underwater breath when full inflated, it's about 15-20 minutes(the diving time determined by the breathing rate). This mini scuba tank only weight for 5.07 lb, with the equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
  • PERFECT COMPATIBILITY : The scuba tank's inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
  • when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices..
  • HIGH QUALITY MINI SCUBA TANK: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. Wh....
Check Stock

0-140 PSI Adjustable Universal Fuel Pressure Regulator, Aluminum Gas Oil Injection Pressure Regulator Kit with Gauge, AN6-6AN Fuel Line Hoses, Install Tool Accessories

  • Adjust Capacity-The fuel pressure regulator is equipped with a reading gauge. The maximum fuel pump capacity is 140psi and can be adjusted from 0psi to 140psi. You can adjust the fuel pressure regulator to your needs and optimize the flow of oil.
  • Universal for All Type Cars. Adjustable fuel pressure regulator, made of Premium aluminum construction, the effect is directly reflected in the throttle more easily, sensitively, and the power is more obvious when increasing speed. Used to Keep the Stable Pressure in the Fuel System.
  • Built-In Diaphragm-The built-in diaphragm, made of special material, controls the opening and closing of the pressure valve, which has a certain buffer effect on the average fuel pressure and makes the oil pressure more stable.
  • Function of The Universal Fuel Pressure Regulator, Universal fuel pressure regulator for fuel injection can increase the proper amount of fuel injection without changing the fuel supply mode of the computer, saving the cost of the fuel booster.
  • The Role of The Fuel Pressure Regulator Kit, Prevents stalling, flooding and other drivability issues by ensuring your carbs are getting the right amount of fuel pressure.
Check Stock

YAMATIC 7/8\ Shaft Vertical Pressure Washer Pump, 2600-3000 PSI @ 2.5 GPM OEM & Replacement Pump for Power Washer Compatible with 308653052, 308653093, 308653009, 308653008, 308653006

  • 003e Pressure washer pumps replacement is designed to replace the (horizontal) mounted pump, and insert to a 3/4" shaft engine, come with 45mm keyway.
  • 003e Power Washer Pump Pressure Pump: 2400 - 2800 PSI , Flow Rate: 3.1 GPM, Power:5-7 HP, Inlet: 3/4" thread, Outlet: M22, RPM:3400, Max. Water Supply Temperature: 104°F.Fits troy-built models and more models. Not fits all series. Please check the pump housing, pump shaft size, pressure power and the pump mounting size fit you pressure washer or not!.
  • 003e Fit Most Horizontal Pressure Washer Engine 196cc to 224cc : Such as some models of Honda, Generac, Briggs & Stratton, Craftsman, Karcher, Blackmax,Ryobi, Troy-Bilt, Craftsman. - BUT You should ask us previously if you are not sure this power pump would fit or not ! Not fit all series models, pls check the mounting size, pressure power and shaft size before you buy. Nothing is worse than having to return a product. Let’s work together to avoid this !.
  • 003e Pressure Washer Pump Parts Pre-filled with oil and ready to use - Comes with Easy start valve (EZ), Thermal relief valve (Made in USA), Chemical Injection & Unloader, Aluminum pump head, Key way stock.
  • 003e 100% Satisfaction Seller Service: EZJOB pressure washer pumps promise 48 Hours Pre-Sale a....
Check Stock

JIFETOR Oil Pressure Tester Kit, Professional Engine Diagnostic Test, 100PSI Pressure Gauge Tool with Hose Adapter for Truck Car ATV

  • OIL PRESSURE TEST AND DIAGNOSTIC: JIFETOR engine oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • FITMENT TYPE: The oil pressure test tool includes 3 sizes (1/8" NPT, 1/4" NPT, 3/8" NPT) selectable brass adapters, can be connected to the corresponding sizes oil pressure test service port, on most gasoline or small diesel engine, includes car, motorcycle, ATV, truck and so on, which oil pressure not exceeds 100psi..
  • PRESSURE GAUGE AND HOSE: Pressure gauge adopts rubber cover protected 3" large dial. 0-100psi and 0-7bar small scale range with big dial, very easy to read. No pressure holding function, return to zero automatically. The 30" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter, can be connected to 1/4" NPT and 3/8" NPT adapters directly. Max working pressure: 300psi.
  • EASY TO OPERATE: When you want to test the oil pressure by this engine oil pressure diagnostic gauge, disasse....
Check Stock

Oil Pressure Tester Kit, 0-140 PSI Engine Oil Pressure Tester Gauge Tool Kit for Cars ATVs Trucks Use.

  • FUNCTION: The engine oil pressure tester kit is used to diagnose and test the engine oil pressure value, to check whether it is normal. The measured value can be used to judge the operation of fuel system components such as electric gasoline pump and oil pressure regulator. And with this best in class oil pressure test tools, you can get a definite pressure value well without relying on the dashboard light..
  • INCLUDING: This oil pressure test tool kit contains a wide assortment of durable adapters designed to fit mot import/domestic engines. The 10 adapters are marked with number, you can choose the right one very easy. 4FT long hose is made of rubber nylon resin, working pressure 300 PSI. This is a great kit for DIY auto tools, to test engine oil pressure value quickly and accurately..
  • DURABLE AND SAFE: The material of the engine oil pressure tester kit consists of Copper, Rubber, ABS Plastic, Iron, and Aluminum.
  • And the gauge is equipped with a shockproof cover, which is under great protect and convenient maneuverability.
  • Whole oil pressure tester kit packed in a molded case making it easy to store and organize the equipment..
  • PARAMETER: The oil pressure gauge use 3" big dial with clear dual scale range 0 to 140 PSI and 0 to 10 Bar. Compare to a large ....
Check Stock

XMT-MOTO Scooter GY6 50CC To 80CC Big Bore Cylinder For VIP Roketa Taotao Baja Silver

  • 【Cylinder Bore】: 47mm / Non-EGR Cylinder.
  • 【Apply to】: GY6 4 stroke 49cc 50cc 60cc 80cc engine upgrade for most of chinese scooter, atv and go karts.
  • 【Parts included】:GY6 80cc Cylinder Head with 64mm valve, 47mm Bore Cylinder Block, Set of 47mm Piston Assy, Piston, Rings and Wrist Pin, Full Set of Engine Gasket, 6pins CDI, Ignition coil, 4pin AC regulator, relay, A7TC Spark Plug, Set of Intake Manifold and Muffler Bolts, and Exhaust locking ha, Set of 8.5 Gram roller , Rocker Arms, Valve Seals, Oil Pump Assy with Driving Gear, Camshaft, Camshaft chain 82, belt 699*18*30, Chain adjuster, Oil screen, spring, cover and oil seal, Starter clutch.
  • 【Fit to】Roketa, Sunl, Baja, Taotao, Panterra, Redcat Tank Giovanni Wildfire Xtreme Seaseng Qlink Yiben Jonway Jmstar, Vento.
Check Stock

YSTOOL Fuel Pressure Tester Gauge Kit 140PSI Automotive Engine Injector Pump Test Gasoline Gas Injection Manometer Tool Set with Inline Fitting Schrader Adapter for Auto Car Motorcycle (Blue Case)

  • ... airtightness & anti-corrosion. Reinforced rubber resin nylon hoses (WP:300PSI) are resistant to torsion & high temperature.
  • After testing the fuel pressure by YSTOOL gasoline engine fuel injection pressure tester, compare the reading with the recommended pressure range. If higher, it could be a faulty fuel pressure regulator or a bent clogged return line. If lower, possible causes are dirty fuel filter, weak pump function, incorrect fuel tank exhaust, restricted fuel line, clogged pump inlet filter or electrical control failure. Petrol is highly flammable, please ask professionals to operate with no open fire nearby.
  • Your satisfaction and recognition are always what we pursue. Within one month from the date of purchase, the product can be returned unconditionally if it is complete and without any damage. Within one year warranty period, any quality issue with the product, you are promised to exchange or refund the problematic parts for free. Please contact us to resolve any issues during your use before leaving any feedback..
Check Stock

2400-2800PSI Pressure Washer Replacement Pump, 3/4\ Shaft Horizontal Pressure Pump Replacement Power Washer Pump Universal Pumps for Power Washer

  • ✔[RESTART YOUR PRESSURE WASHER]: Vertical Pressure Washer Pump 7/8" Shaft MAX 3100 PSI / 2.5 GPM / @3400 RPM, refurbish your pressure cleaner by replacing it with a new pump for up to 150 hours. Top performance at 2800-3000 PSI and replacement for most Rear Outlet 180-196cc at 6.5-7hp engine RYOBI, Honda, Briggs and Stratton, Subaru, PowerStroke, Craftsman, Simpson, Homelite and Many other brand..
  • ✔[EXTENDED SERVICE TIME]: High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, We promise the pump get 200 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in by pass mode. ⚠ But will not fit 3/4" shaft engine pressure washer. If you're not sure, please keep intouch with us!.
  • ✔[EASY JOB]: Built-in for simple & quick cold starts to make the startup a breeze. no need to release pressure before starting engine. Easy set up in 5-10 minutes with Key. At the same time, we come with 3 special test matched nozzles(0°/25°/soap) to help you get the best cleaning solution. Please follow the instructions to help your machine renew working quickly..
  • ✔[NO MAINTENANCE ]: Our pressure washer pump already have pre-filled oil and dou....
Check Stock

EONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox

  • Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
  • Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
  • Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
  • Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
  • Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check Stock