ReviewsEngine Oil Pump Priming Tool

SWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool

  • Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor..
  • 6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid..
  • Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode..
  • Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation..
  • Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used..
Check Stock

Generac 6917 CW10K Clean Water Pump with Hose Kit, 1", Orange

  • Lightweight design with ergonomic carry handle.
  • Onboard instructions with icons of key touch points make this pump easy to use.
  • Easy Prime custom funnel design with tethered priming cap for quick and easy priming.
  • Easily pumps up to 30 gallons per minute.
Check Stock

8mm 5/16 Black Primer Bulb Rubber Fuel Pump Transfer Vacuum Fuel Hand Primer Gasoline Petrol Diesel Pump for Marine Boat Accessories

  • For introducing fuel into the fuel pump after replacement of the fuel filter..
  • Simple and effective tool for priming engines on cars, motorcycles and boats..
  • Suitable for Carburettor and low pressure fuel systems.
  • Be made of rubber and aluminum material, durable, oil proof and aging resistance..
Check Stock

M295 Standard Volume Oil Pump - Compatible with 4.8L, 5.3L, 6.0L Chevy Silverado, Suburban, Tahoe, Trailblazer, GMC Sierra, Yukon, Cadillac Escalade - Replace M295, 12696357, 12586665

  • M295 STANDARD VOLUME OIL PUMP - A mechanical device that circulates oil to the bearings, camshaft and pistons of an engine. A failed oil pump will cause low oil pressure, engine overheat, and unusually noise from the engin. If you notice any of the symptoms, you will need to have your oil replaced..
  • FIT THE FOLLOWING VEHICLES - Standard volume & standard pressure oil pump compatible with 4.8L 5.3L 5.7L 6.0L GM Vortec V8 engine oil pump, induding Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier, model year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020..
  • REPLACE PART NUMBER - Replace GM 12696357, 12586665 oil pump, replace Melling M295 oil pump. Commonly found on Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier with 4.8 5.3 5.7 6.0 V8 Vortec Engine..
  • OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine GM or Melling oil pump, but it works even better and lasts longer. Save yourself times and money ....
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

DRIVESTAR M340 Engine Oil Pump 2004-2008 for Ford F-150/Expedition/Explorer/Mustang,for Lincoln Navigator/Mark LT 5.4L 4.6L

  • Fitment:Oil Pump for Ford 2005-2014 Expedition,2006-2010 Explorer,2007-2010 Explorer Sport Trac,2004-2010 F-150,2005-2010 F-250 F-350 Super Duty,2005-2010 Mustang,for Lincoln 2006-2008 Mark LT,2005-2014 Navigator,for Mercury 2006-2010 Mountaineer.
  • Replace Oil Pump Number:M340,2244-3663,9L3Z-6600-A,3L3Z6600AA oil pump.
  • Deliver Oil:The oil pump can deliver a fixed quantity of pressurized oil to the engine, and keep it running smoothly. Which mean that your engine could always get the right amount of oil pressure, and the critical engine parts wouldn’t be rub together, or cause extensive and damage.
  • Strict Ex-Factory Testing:All products are manufactured in accordance with the international automotive spare parts production specifications, and passed strict testing before leaving the factory to ensure that each product quality is superior.
  • Note:When the certain engine parts don’t get enough oil, the engine may start to make tapping, knocking or rattling noises. Loss of oil pressure can prevent a vehicle from starting. And it’s time for a replacement of your failing oil pump..
Check Stock

ZuwaUSA Drill Powered Pump ¾” 8 GPM - Marine Grade Aluminum | Unistar-2001A (Drill not included)

  • CONNECTION: 3/4” NPT | Dry self-priming to 13 Ft. | Max temperature 200°F | Working pressure of 58 PSI | The 3/8” shank fits all common chucks for most drills.
  • FLUID VISCOSITY: 1 (water) to 20,000 cP (heavy gear oil) | Transports a wide range of liquids, including liquids containing solids, oils, and corrosives.
  • DRILL POWERED: ZUWAUSA heavy-duty drill powered pump is designed to work with rechargeable/electrical drills with a maximum speed of 3,000 RPM.
  • FLUID TRANSFERS: water, seawater, wastewater, diesel fuel, biodiesel, vegetable oils, gear, motor and heating oil, detergents, antifreeze, chemicals, cooling lubricants..
  • EXAMPLE APPLICATIONS: diesel / home heating oil, remote sludge transfer, gear box oil changes, domestic water supply, flooded basements, barrel emptying/filling, draining waste oil, sewerage disposal, fueling vehicles, car wash, draining aquariums, disposal of cooling lubricants, bilge pump, booster pump..
  • OTHER TERMS FOR THIS PRODUCT: Coolant purge pump, Water purge pump, Oil purge pump, Fluid purge pump, Drill pump, portable water pump, portable oil pump, portable coolant pump, Heating oil transfer pump.
Check Stock

DRIVESTAR M295HV High Volume Engine Oil Pump for Chevrolet Silverado 1500/ Express 1500,4.8L 6.0L

  • Fitment - Oil Pump for Chevy/GMC.More detailed information please check Part Finder.Thanks.
  • Deliver Oil - The oil pump can deliver a fixed quantity of pressurized oil to the engine, and keep it running smoothly. Which mean that your engine could always get the right amount of oil pressure, and the critical engine parts wouldn’t be rub together, or cause extensive and damage.
  • Strict Ex-Factory Testing:All products are manufactured in accordance with the international automotive spare parts production specifications, and passed strict testing before leaving the factory to ensure that each product quality is superior.
  • Please Note – When the certain engine parts don’t get enough oil, the engine may start to make tapping, knocking or rattling noises. Loss of oil pressure can prevent a vehicle from starting. And it’s time for a replacement of your failing oil pump..
Check Stock

Oil Pressure Tester Kit, 0-140 PSI Engine Oil Pressure Tester Gauge Tool Kit for Cars ATVs Trucks Use.

  • FUNCTION: The engine oil pressure tester kit is used to diagnose and test the engine oil pressure value, to check whether it is normal. The measured value can be used to judge the operation of fuel system components such as electric gasoline pump and oil pressure regulator. And with this best in class oil pressure test tools, you can get a definite pressure value well without relying on the dashboard light..
  • INCLUDING: This oil pressure test tool kit contains a wide assortment of durable adapters designed to fit mot import/domestic engines. The 10 adapters are marked with number, you can choose the right one very easy. 4FT long hose is made of rubber nylon resin, working pressure 300 PSI. This is a great kit for DIY auto tools, to test engine oil pressure value quickly and accurately..
  • DURABLE AND SAFE: The material of the engine oil pressure tester kit consists of Copper, Rubber, ABS Plastic, Iron, and Aluminum.
  • And the gauge is equipped with a shockproof cover, which is under great protect and convenient maneuverability.
  • Whole oil pressure tester kit packed in a molded case making it easy to store and organize the equipment..
  • PARAMETER: The oil pressure gauge use 3" big dial with clear dual scale range 0 to 140 PSI and 0 to 10 Bar. Compare to a large ....
Check Stock

DRIVESTAR M365 Engine Oil Pump for Chevy(GMC) Silverado 1500/Suburban 1500/Tahoe,for Cadillac CTS/Escalade ESV 5.3L 6.0L 6.3L

  • Fitment - Oil Pump for Chevy,for GMC.More information Please check Part Finder,Thanks..
  • Replace Oil Pump Number - 12612289, M365, EP365, OP3172, 224-43669, 601-8057, EPK137, PO26-M365, EM-365, 601-2121.
  • Deliver Oil - The oil pump can deliver a fixed quantity of pressurized oil to the engine, and keep it running smoothly. Which mean that your engine could always get the right amount of oil pressure, and the critical engine parts wouldn’t be rub together, or cause extensive and damage.
  • Strict Ex-Factory Testing:All products are manufactured in accordance with the international automotive spare parts production specifications, and passed strict testing before leaving the factory to ensure that each product quality is superior.
  • Please Note – When the certain engine parts don’t get enough oil, the engine may start to make tapping, knocking or rattling noises. Loss of oil pressure can prevent a vehicle from starting. And it’s time for a replacement of your failing oil pump..
Check Stock

High Volume Oil Pump Replacement - Compatible with 4.8L 5.3L 6.0L Silverado, Suburban, Tahoe, Trailblazer, GMC Sierra, Yukon, Cadillac Escalade - Replace M295HV

  • REPLACEMENT HIGH VOLUME OIL PUMP - If you have an engine that can rev beyond 6,000 RPM or higher, a high performance or high volume oil pump would probably be a good upgrade and provide added lubrication insurance..
  • FIT THE FOLLOWING VEHICLES - High volume & high pressure oil pump compatible with 4.8L 5.3L 5.7L 6.0L GM Vortec V8 engine oil pump, induding Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier, model year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020..
  • REPLACE PART NUMBER - Replace GM 12696357 12586665 oil pump, replace Melling M295HV oil pump. Commonly found on Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier with 4.8 5.3 5.7 6.0 V8 Vortec Engine..
  • OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine GM or Melling high volume oil pump, but it works even better and lasts longer. Save yourself times and money by replacing high volume oil pump yourself..
Check Stock