ReviewsEngine Oil Pump Service Kit

THINKWORK Oil Pump Extractor, 12V 80W Marine Oil Change Pump and Electric Oil Pump, with Overheat Protector for Boat, Car, Speedboat, Motorcycle

... oil pump has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. The suction power of the micro suction pump is limited. Please do not connect other extension tubes..
THINKWORK GUARANTEE SERVICE - we provide satisfactory and reliable customer service. If there is any problem with this oil pump, please contact customer service in time, and you will get a satisfactory result..

Check Stock

DNJ EK3165AM Master Engine Rebuild Kit for 1999-2001 / Chevrolet, GMC/Sierra 1500, Sierra 2500, Silverado 1500, Silverado 2500, Tahoe, Yukon, Yukon XL 1500/5.3L / OHV / 16V / LM4, LM7 / VIN T

THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Head Gasket Set, Lower Gasket Set, Freeze Plug Set (Brass), Cam Bearings, Timing Chain Kit, Oil Pump.
FITS: 99-01 Chevrolet, GMC / Silverado 1500, Suburban 1500, Tahoe, Sierra 1500, Yukon, Yukon XL 1500, Silverado 2500, Sierra 2500 5.3L V8 OHV Naturally Aspirated LM4.
FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, 1st Design, Positive Type Stem Seals, Master Kit, w/ 3 Bolt No Sensor Hub Cam Gear.
You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.

Check Stock

High Pressure Oil Pump Kit with Base Gasket, HPOP Upgraded Full Replacement for 1994.5-2003 Ford Powerstroke Diesel Engine 7.3L F250-F550, E250-E450, Excursion (Pack of 14 Set)

(Specifics) This is a set of repair kit prevents oil leaks in the engine bay. It includes the components you to replace all seals and O-rings on your high-pressure oil pump and correctly reinstall the pump..
(Compatibility) Compatible with 1994.5-2003 Ford Vehicles with a 7.3L Powerstroke Diesel Engine.
(Interchangeable Part #）Replacement for F6TZ-9417-AA, 2C3Z-9G804-AB, 4C3Z-9C977-AA.
(Tips) Professional Installation is Highly Recommended (No Instruction Included).
(After-Sale Service) 1 Year Warranty guaranteed, and friendly Customer Service available..

Check Stock

JoyFans Oil Pressure Tester Tool, 0-140PSI Oil Pressure Gauge Kit for Fuel System Mechanical Sensor Engine Cylinder Compression Test with Hose Adapters for Cars ATVs Trucks Use Red Case

... pressure gauge, 1pc 90° elbow fitting, 10pcs steel adapters and spare seal gaskets.
Ideal for use on most types of domestic and imported cars, motorcycles, boats and other vehicles with gasoline engines and small diesel engines. Always notice the low pressure range of this oil pressure sensor test kit..
Thoughtful Service: We are always trying hard as we can to provide customers with better quality products and services. Help you to complete the satisfactory shopping experience and tool selection. The item will be packed well to prevent the breakage along the way. If you have any questions, please feel free to contact us. Goods purchased in this store is refundable within 30 days as long as it's intact, and we provide 12-month after-sales quality support..

Check Stock

Racing Power Company R9729 Orange Drag Race Oil Pan for Big Block Chevy

Brand New Weiand Oil Pan Kit, 7 Quarts, Gold Zinc Finish, Fits 1986-2002 Small Block Chevy Drag Racing Engines (Holley Part #5003WND).
Fits: 1986-2002 Small Block Chevy Drag Racing Engines | Includes: Application specific oil pan | Oil pan gasket | Oil pump pickup | Pan mounting bolt kit.
Features: Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high performance engine oil systems fed properly | Kit includes Pan, Pump Pickup, Pan Gasket, and pan mounting bolt kit.
Specs: Application: 1986-2002 Small Block Chevy | Brand: Weiand | Crank Scraper Included: No | Dipstick Location: Passenger | Emission Code: 5 | Finish: Gold Zinc | Material: Stamped Steel | Oil Pan Capacity: 7 Quarts | Oil Pan Depth: 8.125" | Oil Pan Type: Fabricated | Product Type: Oil Pan Kit | Sump Location: Rear | Windage Tray Included: No.
NOTE: Kit designed to work with standard volume oil pumps..

Check Stock

RKX 2.0T Vacuum Pump Reseal Rebuild Kit Compatible With VW Audi 2.0 T TFSI MK6 GTI GLI A3 MK7

RKX vacuum pump reseal kit compatible with Volkswagen Audi 2.0 T TFSI Engine Fits Pump part # 06H145100AD/AB/AK (see compatibility table below).
Includes all needed gaskets to rebuild the 2.0t TFSI vacuum pump and stop it from leaking oil. The Dealership does not sell this kit as a spare part.....
Our custom injection molded seals are made from military grade Fluorocarbon and designed to hold up under the extreme conditions of your engine..
Resealing your pump is cost effective and easy! Our kits included everything needed to seal your pump and stop it from leaking oil..
Compatible with: 2008.5 + Jetta, GLI, GTI, Golf, Passat, and A3, TT.

Check Stock

Vevitts 80w Oil Change Extractor Pump 12V Oil Extractor Pump for Changing Diesel Fluid Scavenge Suction Oil Transfer Pump Kits for Jet Ski, Truck, RV, ATV, Boat (Red)

【Instructions for use】1. Please pay attention to the direction of the inlet and outlet, the positive and negative poles and the locking hose lock before use.
2. Please start the vehicle and heat the engine oil to 40-60 degrees for about 5 minutes, otherwise, the oil change pump may have low suction or get stuck. 3. CAN NOT be used to extract water, gear oil (too viscous) or flammable liquid (fuel, gasoline,kerosene,etc.)..
【Complete Diesel Change Pump Kit】The oil transfer pump is mini but powerful. With 4.6ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling..
【12V 80w Oil Extractor Pump】Oil change pump, a great helper for quick and clean oil changing and transfer, all parameter is verified by multiple test. Diesel Flow Rate: 3.5L/min, Engine Oil Flow Rate(40-60℃): 1L/min, Inlet Tube Length: 1.2m/47.2in, Outlet Tube Length: 1.4m/55.1in, Voltage: 12V, Maximum current: 5A..
【Premium Quality】We use pure copper for motors.Good conductivity, corrosion resistance and rust resistance, effectively avoid leakage or short circuit. Instead of manual operation, it can help you change oil quickly and cleanly....

Check Stock

THINKWORK Oil Pump for Oil Change, 12V 80W Electric Oil Pump and Marine Oil Change Pump, Upgraded Oil Change Pump Extractor with Handle for Boat, Car, Motorcycle

... oil pump has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. The suction power of the micro suction pump is limited. Please do not connect other extension tubes..
THINKWORK GUARANTEE SERVICE - we provide satisfactory and reliable customer service. If there is any problem with this oil pump, please contact customer service in time, and you will get a satisfactory result..

Check Stock

12V Electric Transfer Pump 5L DC Transfer Pump, 12V 60W Oil Extractor Pump for Car Marine Boat Scavenge Exchange Transfer Pump Engine Oil Extractor

...ctor transfer pump is equipped with the strong motor and adopting a continuous working principle, good help when you pump.Oil & fuel transfer extractor pump maximum voltage reach 12V and the maximum pressure 0.8mpa, the flew rate up to 5L/min. Electric oil extractor pump ideal for filling diesel powered vehicles or engines at your garage or repair shop. It can quickly and conveniently help you solve the problem of pumping liquid.
Portable 12v Oil Pump Extractor – Small Size: Transfer pump is small and lightweight, with a body length of approximately 5.85 inches and a diameter of 1.85 inches, making it easy to carry and store. Flow vacuum transfer pump is very easy to carry, you can use it wherever you want to use it because of its compact size and handle grip. This pump has self-priming, rotary vane pump with switch and internal bypass valve to ensure reliable operation every time.
Tips for oil tranfer pump: If you want to connect this pump to AC power, you will need a power converter. The pump can not only pump oil, but also pump hydraulic oil and other liquids. Electric oil change pump kit is not allowed to pump corrosive liquids, strong acids and strong alkaline liquids. Please use it when the engine is warm, or engine oil is warm and the vi....

Check Stock

DNJ EK4173AM Master Engine Rebuild Kit for 2004-2006 / Ford, Lincoln/Expedition, F-150, F-250 Super Duty, F-350 Super Duty, Mark LT, Navigator / 5.4L / SOHC / V8 / 24V / 330cid / VIN 5, VIN V

THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Head Gasket Set, Lower Gasket Set, Timing Chain Kit, Oil Pump.
FITS: 04-06 Ford, Lincoln / Expedition, F-150, F-250 Super Duty, F-350 Super Duty, Mark LT, Navigator 5.4L V8 SOHC Naturally Aspirated.
FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Master Kit, w/ 13/16 Inlet Pump.
IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.

Check Stock

JIFETOR Oil Pressure Tester Kit, Professional Engine Diagnostic Test, 100PSI Pressure Gauge Tool with Hose Adapter for Truck Car ATV

...g oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
FITMENT TYPE: The oil pressure test tool includes 3 sizes (1/8" NPT, 1/4" NPT, 3/8" NPT) selectable brass adapters, can be connected to the corresponding sizes oil pressure test service port, on most gasoline or small diesel engine, includes car, motorcycle, ATV, truck and so on, which oil pressure not exceeds 100psi..
PRESSURE GAUGE AND HOSE: Pressure gauge adopts rubber cover protected 3" large dial. 0-100psi and 0-7bar small scale range with big dial, very easy to read. No pressure holding function, return to zero automatically. The 30" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter, can be connected to 1/4" NPT and 3/8" NPT adapters directly. Max working pressure: 300psi.
EASY TO OPERATE: When you want to test the oil pressure by this engine oil pressure diagnostic gauge, disassemble the oil pressure sensor first, then screw on the oil pressure gauge, start the vehicle to operate it at a specified speed, the reading in the pressure gauge is the oil pressure of lubrication system. Please refer to equipment manufacturer's operation instruction and compare to the manufacturer's recommended ....

Check Stock