Sunsong 8401477 Power Steering Pump Seal Kit
- Contains the quality components required for steering Unit repair.
- Included components: Power Steering Pump Seal Kit.
ReviewsEngine Power Steering Pump Seal Kit
Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler
- POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
- COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
- the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
- DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
- each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
- WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
- the two forcing screws also work with most VW vehicles’ power steering systems.
- USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles
- POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
- COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
- the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
- DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
- each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
- WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
- the two forcing screws also work with most VW vehicles’ power steering systems.
- USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
551497 BBC Power Steering Pump Bracket Adjustable Kit Replacement for Long Water Pump 454 and Big Block Chevy 396 402 409 427 454 502 V8 Eight Cylinder
- 1. This kit is compatible with the Big Block Chevy engine of the long water pump (DWP-442).
- 2. Compatible with power steering pump part number 36P1435.
- 3. The kit must be used with long water pump and pulley.
- 4.Fit for 1, 2 or 3 ribs and serpentine pulleys.
- 5. Please confirm whether your model is suitable before buying.
3L Manual Transmission Fluid Pump Oil Filling Filler System Fluid Transfer Pump Tool with Adapters
- ◇ Use to dispense and extract the ATF fluid of vehicles. Provide with pneumatic operation. With volume guide for controlling fluid more easily.
- ◇ Car fluid pump transmission fill kit includes a 3-liter fluid container with pump handle lid, a pressure gauge, a pressure-release cap, a tube and 8 transmission fluid adapters for the most common vehicles.
- ◇ With an air compressor, the pump extract fluids in minutes. The 3L pneumatic fluid extractor ensures high extraction speed and automatically dispenses.
- ◇ This transmission pump can be used for pressurized fills like engine coolant, motor oil, brake or power steering fluid.
- Transmission fluid pump transfer system is a money saver for the DIY mechanic’s tool kit.
- ◇ Applicable to common car brands in the market, please see the picture for specific applicable car brands.
4000PSI Pressure Washer Pump Horizontal Shaft 1\ For EB4040HA With Honda Engine
- 【Reborn Your Pressure Washer】YAMATIC Horizontal Power Washer Pump 3/4" Shaft MAX 3300 PSI / 2.5 GPM / @3400 RPM, Save money by replacing your pump instead of buying a new power washer. Top performance at 2800-3300 PSI and fit most 208-220cc 6.5HP-7.0HP engine. Replacement for Simpson, Generac, Homelite, Honda, Karcher and more. ※►Diagonal distance between screw holes is 3 5/8''. ►Hole Distance to hole is 2 9/16''. ►Key width 3/16''. ►Depth 2 5/8''. ⚠ Will not fit 7/8 inch shaft as engine..
- 【Extended Durability】 High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, It is manufactured from fully anodized die-cast aluminum for protection against rust, get 200 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in bypass mode. ⚠NOTE: Will not fit 7/8 inch shaft as engine. If you're not sure fit or not, just message us and we will confirm it for you!.
- 【Maintenance-Free】This pump features a maintenance-free crankcase so you never have to change the gasoline. This easy-to-install kit is great for power washers that can support 3300 PSI at 2.5 GPM to wash walls, fences, sidewalks, vehicles, and more..
Mini V8 Engine Model Kit That Works Run, STEM Hobby Toy Building Kit for Kids & Adults with DIY Guide & Realistic Parts, for AX90104, SCX10, Capra, VS4-10 Pro/Ultra Model Car
- ...ld of mechanical engineering in one immersive set that makes the perfect hobbies gift set for adults or kids..
- Simulation Metal Engine: V8 internal combustion engine structural principle design, drive structure of belt wheel winding, generator, air conditioning compressor, steering pump, water pump, complete output flywheel and layered cylinder head, cylinder head cover, spiral near and far valve intake manifold, oil pan structure, and power supply drive board plug interface..
- Model That Works: Deliver the action of a classic car engine thanks to the powerful pistons and interactive cables! Simply plug the cables into the battery pack distributor and watch the engine fans turn around with real engine sounds..
- Application: The simulated V8 engine is suitable for a variety of RC models such as AX90104, SCX10, Capra, and VS4-10 Pro/Ultra. Installing this engine will make your remote control car unique and powerful, but it is also a great decoration to exercise the ability to assemble and restore the V8 engine..
- Tips: This engine kit does not contain the bracket, you can choose the cor....
ICT Billet L99 LS3 Power Steering Pump Relocation Bracket Kit for Turbo Headers Compatible w/ 2010 to 2012 Camaro SS Power Steering Pump and Pulley LQ4 LQ9 L33 5.3L 6.0L 6.2L LS Truck 551581-LS30-3
- Space saver design, relocates L99 LS3 power steering pump close to the center of the engine for maximum clearance.
- Made in Wichita Kansas, from aerospace grade, USA produced, billet aluminum.
- Compatible with 2010-2012 LS3 L99 Camaro power steering pump & pulley.
- Relocates the power steering pump close to the center of the engine for maximum clearance.
YAMATIC Pressure Washer Pump Horizontal 3/4\ Shaft 3000 PSI @ 2.5 GPM Universal Pump and Original Engineering for Most Brand gas engine power washer
- 【Reborn Your Pressure Washer】YAMATIC Horizontal Power Washer Pump 3/4" Shaft MAX 3000 PSI / 2.5 GPM / @3400 RPM, Save money by replacing your pump instead of buying a new power washer. Top performance at 2600-3000 PSI and fit most 180-225cc at 6HP-8.0HP engine. Replacement for Simpson, Generac, Homelite, Honda, Karcher and more..
- 【Extended Durability】 High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, get 120 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in bypass mode. ⚠NOTE: Will not fit 7/8 inch shaft as engine. If you're not sure fit or not, just message us and we will confirm it for you!.
- 【Maintenance-Free】This pump features a maintenance-free crankcase so you never have to change the gasoline. This easy-to-install kit is great for power washers that can support 3000 PSI at 2.5 GPM to wash walls, fences, sidewalks, vehicles, and more..
- 【Easy Start】 Built in for simple & quick cold starts to make the startup a breeze, no need to release pressure before starting engine. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in act....
SANOL Max 3000 PSI Pressure Washer Pump Horizontal 3/4'' Shaft 2.4 GPM Power Washer Pump Replacement For Honda GC190, 309515003,308418007, G3050OHC, 020241 and More
- 【Reborn Your Pressure Washer】SANOL Horizontal Power Washer Pump 3/4" Shaft MAX 3000 PSI / 2.4 GPM / @3400 RPM, Save money by replacing your pump instead of buying a new power washer. Top performance at 2600-3000 PSI and fit most 196-212cc at 6.5HP-7.0HP engine. Replacement for Simpson, Generac, Homelite, Honda, Karcher and more. ※►Diagonal distance between screw holes is 3 5/8''. ►Hole Distance to hole is 2 9/16''. ►Key width 3/16''. ►Depth 2 5/8''. ⚠ Will not fit 7/8 inch shaft as engine..
- 【Extended Durability】 High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, get 120 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in bypass mode. ⚠NOTE: Will not fit 7/8 inch shaft as engine. If you're not sure fit or not, just message us and we will confirm it for you!.
- 【Maintenance-Free】This pump features a maintenance-free crankcase so you never have to change the gasoline. This easy-to-install kit is great for power washers that can support 3000 PSI at 2.4 GPM to wash walls, fences, sidewalks, vehicles, and more..
- 【Easy Start】 Built in for simple & quick cold starts to make the startup a breeze, no ....
Power Steering Seals - Power Steering Pump Seal Kit for Subaru Outback 2010-2012
- Top-rated power steering pump seal kits and replacement seals.
- Fits 2010-2012 Subaru Outback with 2.5L turbo and 3.6L engine..
- All seals are made to OEM or higher specification.
- All our kits are complete and 100% brand new. Kits will include all seals, o-rings, and OEM parts necessary for the repair.