ReviewsEngine Vacuum Gauge Autozone

6-CHANNEL - The Digi Sync | Digital Throttle Body Sync Tool | Digital Carb Sync Tool | Vacuum Gauge Digital Peaking Manometer | Model DS3 | NOT Motion Pro Syncpro or Alpha Moto

  • 6 CHANNEL -Digital Carb Sync Tool | Digital Vacuum Gauge (Digital Peaking Manometer) | Works on vehicles with 2, 3, 4, 5, or 6 Carbs or Throttle....
  • Comes with a set of 5mm & 6mm adapters and replacement vacuum caps.
  • Balancing will improve POWER, response time, smoothness, performance, operating temperature of your engine. This leads to better gas mileage with....
  • Digital balancing is better because it is more accurate than fluid or gauge synchronizers and there is no need to interpret bouncing gauge needles.....
  • Battery operated (no cords)! Measures & Displays RPM - MADE IN THE USA!.
Check Stock

Mityvac MV8000 Professional Single Person Manual Brake and Clutch Bleeding Tune-up Kit

  • The MV8000 kit includes: Selectline hand-vacuum pump (Model MV8010).
  • (4) connection tubes (24", 1-1/2", 3", 3-5/8") and cupped and tube adapters..
  • Performs one-person engine performance diagnostics, vacuum brake and clutch bleeding, fluid transfer, evacuation, sampling, windshield repair, turbocharger testing and diesel fuel priming..
Check Stock

Coolant Vacuum Refill Tool Kit Engine Cooling System Vacuum Purge & Refill Kit New Coolant Bleeder Kit with 4 Rubber Sleeves & 1 Universal Adapter Cone Plug (with Carrying Case) (4 Connectors)

  • ...UM TYPE COOLANT FILLING FUNCTION: Pneumatic vacuum coolant filler first sucks and forms a vacuum on the cooling system by using shop air, then draws coolant into the cooling system.(Need vacuum pump and not included in the kit) Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine. Normally, it takes 5-10mins to refill the coolant, the exact time depends on the size of the tank. Easy to operate and save time.
  • WIDELY USAGE RADIATOR PURGE AND ANTIFREEZE REFILL TOOL: JIFETOR antifreeze filler kit includes a universal tapered rubber adapter, with MIN. diameter 1.5CM and MAX. diameter 5CM, fits for almost all types of vehicles. The adapter can replace the radiator cap to seal the cooling system, and connect with the quick coupler on coolant refiller to help to fill antifreeze..
  • WATER TANK COOLANT VACUUM REFILL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30~0inHg (-76~0cmHg), and normally -25~-20inHg is right time to add coolant. 18" rubber resin material weave reinforced hose, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Also there is a 21" metal chain hook fo....
Check Stock

YSTOOL Radiator Pressure Tester Pneumatic Vacuum Type Purge Refill Kit Universal Automotive Cooling System Water Tank Leak Test and Coolant Fill Tool 28PCS Set with Adapters Gauge Black Case

  • ... pointer drops over time to confirm a system leak..
  • Vacuum coolant filler uses shop air to draw a vacuum, by using the connected coolant filling hose to extract new coolant and transfer it into the cooling system with no air pockets produced. Adding coolant in vacuum condition will not appear large cavitation, avoid engine warping and other damage. Coolant vacuum refill tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass parts for anti-corrosion and durability..
  • Normally, coolant pressure tester and refill kit takes about 10 mins to test leak and 5-10 mins to refill coolant. Simple time-saving operation. Also much cheaper than the maintenance cost or a new engine. Black blow-molded case makes for easy transportation, simple storage, and quick identification. This set is ideal for a variety of domestic and import vehicles. Suitable for Ford, Mercedes Benz, GM, Jeep, Oldsmobile, Pontiac, Buick, Chevrolet, Chrysler, Dodge, etc..
  • Thermometer uses stainless steel material, with scale range of 0 - 200℃(32 - 400℉). 21PCS color coded radiator adapters have the exact corresponding serial numbers and positions on the picture, and are equipped with detailed applicable models in instruction for easy reference. American a....
Check Stock

BOSCH (FIX 7803 Vacuum and Pressure Tester Kit, Black

  • Great way to fine tune carburetion and timing for peak performance and maximum fuel economy.
  • Use to test fuel pump pressure, mechanical condition of the engine, vacuum control system function, and much more.
  • Use to find: intake manifold leaks, blown manifold and head gaskets, worn piston rings, burned valves, and leaking vacuum lines on conventional and computer-controlled vehicles.
  • Easy-to-read, 3-1/2 inch diameter face displays 0-30 inches vacuum (0-70cm) and 0-10 pounds (0-70 kPs) of pressure in both standard and metric scales.
  • Includes gauge, hose, multiple adapters, and detailed usage and testing instructions in English, Spanish, and French. Note: fuel system functions are for carbureted engines only - not for use on fuel injected vehicles.
Check Stock

Automotive Smoke Leak Detector Tester EVAP Smoke Machine with Dual Mode

  • .... If the pressure gauge continues to decrease, Explain that the pipeline leak needs to be repaired..
  • 【EVAP Detection】American cars that began production in 1996 are equipped with EVAP service ports.
  • in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system..
  • 【Wide Testing Range】Built-in air pump,The smoke leak detector can do smoke testing of multiple systems, such as EVAP systems, Intake Systems, Cooling / EGR /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks.Applicable cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats..
Check Stock

HOTSYSTEM 7 Color Turbo Boost/Vacuum Gauge Kit Pointer & LED Digital Readouts 2-1/16″ 52mm Black Dial for Car Truck

  • 2 1/16 Inches (52mm) black face gauge, One Year Limited Warranty..
  • Turbo Boost / Vacuum Gauge Monitoring car’s compression and boost levels from -30 inHG to 30 PSI,avoiding turbo over boost causing other possible engine issues..
  • Display Feature: An pointer gauge with an illuminated red needle and blue LED display,7 Solid Color Settings for easier night driving..
  • Easy Installation:Comes with the boost sensor,1.94ft power wire harness,and installation instructions,all of which make the install process quick and easy..
  • Note: They are only accurate at sea level. IF you have any product or installation issue,please contact us, we will offer a good solution within 24hours..
Check Stock

Fuel Test Kit with 1 Reusable Tester for E85, Gasoline, Race Gas, Ethanol, Ethanol-Free Fuel Test

  • 8PCS Professional Engine Cylinder Compression Tester Kit Automotive Tool Gauge,Cylinder Compression Gas Engine pressure test kit.
  • Checking Compression On Petrol Engine Quickly And Accurately,The gauge readings assist to diagnose if there are following problems: valve sticking, carbon build-up, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, burned or damaged piston..
  • Completed Kit Comes With Adapters For Most Applications,There are 16" long flexible extension hose with 4 sizes (10mm 12mm 14mm 18mm) selectable brass adapters in the engine compression test kit,.
  • Pressure release button on the side of the tester helps with easy pressure release, 3" gauge with dual color scale..
  • The engine cylinder compression test tool kit can be widely used for most type and depth spark plug well. If you have motorcycle car truck ATV mower and any other vehicles with gasoline or gas engine, and you are a professional on repairing vehicles, you can try this kit. Please note, this cylinder compression test gauge is not suitable for most diesel engine, because the range of the gauge is only 0-300PSI, which is much lower than most diesel engine compression..
Check Stock

PANGOLIN Universal Motorcycle Fuel Vacuum Carburetor Synchronizer Balancer Carb Sync Balancing Gauge Set Fuel Vacuum Carburetor Synchronize Tool Kit for Honda Yamaha Kawasaki Suzuki GS KZ XS

  • ...ded for bench top use. It comes with both 5mm and 6mm adapters, will work with all bike models includes Yamaha which requires 6mm adapters..
  • ☞[Simple Reading]: Each 2" gauge features 0-76cm/hg readings, shut off valve and all hardware is high grade chrome finish..
  • ☞[Strength]: Troubleshoot spark misfires and poor engine compression. Air flow control is handled by needle and seat valves instead of knobs. This helps to resist the dial indicator "bounce" associated with many other lower quality gauges.
  • If you need a video of the calibration the gauge, please contact us and we will send it to you immediately!.
  • ☞[Features]: Quickly diagnose improper timing, stuck valves, leaking manifolds, improper fuel mixture, spark misfires and much more..
  • ☞[Easy use and Long Service Life]: This Vacuum Carburetor Synchronize Tool Kit includes long and short carburetor adapters for easy access.
  • Made of high-quality material, this tool set is very durable and long serveice life, 6 month warranty.
  • If you are not satisfied with the quality of our product, please contact with us through amazon message, we will exchange it with a free for you or you can get a full refund. we guarantee that you will not lose money for buying our products..
Check Stock

Radiator Pressure Tester Vacuum Refill Tool Kit - 28PCS Coolant System Leak Tester and Pneumatic Purge Fill Set with Adapter Refill for Vehicle

  • 【Multi-Function】Integrating three functions as leak cooling system,coolant refilling and temperature measurement in one.Coolant Pressure Tester can not only detect internal engine leaks caused by blown head gaskets and cracked block or heads,but also external cooling system leak.The vacuum fills coolant tool automatically fills coolant and eliminates air pockets under vacuum to avoid engine distortion or other damaged.Thermometer to check if coolant temperature is too high.All in 1,more choices!.
  • 【Wide Applications】Cooling system pressure tester is equipped with 17 specific adapters and 1 universal tapered rubber adapter and 3 radiator cap test adapters and 2 connectors, compatible with most of domestic & imported vehicles and works on 99% of the coolant systems.Color code radiator tests caps make it easy to choose the suitable tests cap for the job of messy.A fascinating gift for car lovers and a useful set of tools for families..
  • 【Value for Money】Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosive and wearproof. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe, and normally -25 to -20inHg is right time to add coolant. 24" rubber resin material weave reinforced hose, featu....
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock