ReviewsEnhances Torque Capacity

Lubegard 62005 M-V ATF Supplement 10 oz.

  • Enhances DEXRON III/ MERCON ATF to perform like a MERCON V ATF, Eliminating the need for MERCON V ATF.
  • Prevents overheating, reducing elevated operating temperatures up to 40 degrees Farenheit, Dramatically reduces friction and tightens the shift cycle....
  • Eliminates transmission fluid foaming and oxidation, Optimizes total transmission performance, Extends fluid life.
  • Eliminates clutch chatter and torque converter shudder, Eliminates objectionable noises during shifts, Softens and modifies harsh shifts.
  • Keeps valves and governors free and frees stuck valves in valve bodies, Superior seal compatibility and conditioning, Only protectant that increases....
Check Stock

Dental Implant Latch-Type Multi-Driver Set Short Drivers for Dental Practices

  • Includes 6 different short screw driver tips with latch-type insert, a 50 Ncm torque wrench, a hand adapter, and an organizer base. Compatible with all major implant brands. See photos..
  • The multi-driver set comes with a versatile 50 Ncm capacity torque wrench with laser markings at 15, 25, 35, and 50 N-cm torque settings, perfect for placing implant bodies and seating abutments. The wrench is tested and certified to have an accuracy of +/- 5% without calibration even after thousands of applications..
  • The driver tips are precision-milled from hardened stainless steel and are torque-tested to sustain over 42 Ncm in strength – tough enough to provide the torque force generally required for tightening screws by major implant manufacturers, yet still gentle for the screws. Identification of the driver tips are laser etched on the side of each of the driver shaft. The short drivers are 7mm..
  • Comes with an elegant organizer with the names of the tips and their graphical icons laser-etched to help keeping the driver set organized. The case has pre-drilled place-holders for 6 long and 6 short drivers, plus 6 place-holders for spare drivers, 3 short and 3 long. You can have peace of mind knowing that the small items are all in their places when you need them..
Check Stock

Dewalt DCF850B 20V Atomic Cordless Compact 1/4' Impact Driver (Bare Tool)

  • Maneuver with ease: compact, under 4 in. Design for optimized ergonomics and access to difficult-to-reach spots.
  • High-performance brushless motor delivers 1,825 in-lb of torque and 3,250 rpm to drive large-diameter screws.
  • Pro-level control and precision with a variable 3-speed trigger.
  • Brighten dark work areas: integrated 3-led work light enhances visibility in dimly lit spaces.
Check Stock

Witproton Ball Splines with Both Ends Stepped and Tapped 13mmX250mm 1pc

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

Witproton Ball Splines - Both Ends Stepped 8mmX300mm 1pc

  • Low friction: the ball does not circulate, and it can achieve rolling motion with minimal friction..
  • It can perform high-precision linear motion: as a component of the shaft and the nut, the gap in the rotation direction can be adjusted to ensure accuracy..
  • Rotating torque can be transmitted: the ball rolls on the ball groove of the spline shaft, and it can move linearly while transmitting the rotating torque..
  • Compact design: Even with a single-axis mechanism, it can move linearly while keeping the nut in the direction of rotation without deviation..
  • Large load capacity and long service life: Because the rolling surface is made of R-shaped ball groove in line with the diameter of the ball, the contact area is large, the load capacity is strong, and the service life is long..
Check Stock

Slocable Ball Splines - One End Tapped 10mmX350mm 1pc

  • Low friction: the ball does not circulate, and it can achieve rolling motion with minimal friction..
  • It can perform high-precision linear motion: as a component of the shaft and the nut, the gap in the rotation direction can be adjusted to ensure accuracy..
  • Rotating torque can be transmitted: the ball rolls on the ball groove of the spline shaft, and it can move linearly while transmitting the rotating torque..
  • Compact design: Even with a single-axis mechanism, it can move linearly while keeping the nut in the direction of rotation without deviation..
  • Large load capacity and long service life: Because the rolling surface is made of R-shaped ball groove in line with the diameter of the ball, the contact area is large, the load capacity is strong, and the service life is long..
Check Stock

Sargent & Greenleaf 6730-112G Lock D225G Dial R167G Ring - Gold Finish

  • Three combination wheels for 1,000,000 possible combinations..
  • Integral relock trigger thwarts punch attacks..
  • UL Listed Group 2 lock. Matches the mounting dimensions of most mechanical and electronic safe locks.
  • Patented S&G torque adjuster enhances security by maintaining proper wheel pack tension..
  • Brass lever with metal wheels (brass and aluminum) for long, dependable life..
Check Stock

Witproton Ball Splines with One End Stepped 10mmX300mm 1pc

  • Low friction: the ball does not circulate, and it can achieve rolling motion with minimal friction..
  • It can perform high-precision linear motion: as a component of the shaft and the nut, the gap in the rotation direction can be adjusted to ensure accuracy..
  • Rotating torque can be transmitted: the ball rolls on the ball groove of the spline shaft, and it can move linearly while transmitting the rotating torque..
  • Compact design: Even with a single-axis mechanism, it can move linearly while keeping the nut in the direction of rotation without deviation..
  • Large load capacity and long service life: Because the rolling surface is made of R-shaped ball groove in line with the diameter of the ball, the contact area is large, the load capacity is strong, and the service life is long..
Check Stock

Slocable Ball Splines with One End Stepped 10mmX300mm 1pc

  • Low friction: the ball does not circulate, and it can achieve rolling motion with minimal friction..
  • It can perform high-precision linear motion: as a component of the shaft and the nut, the gap in the rotation direction can be adjusted to ensure accuracy..
  • Rotating torque can be transmitted: the ball rolls on the ball groove of the spline shaft, and it can move linearly while transmitting the rotating torque..
  • Compact design: Even with a single-axis mechanism, it can move linearly while keeping the nut in the direction of rotation without deviation..
  • Large load capacity and long service life: Because the rolling surface is made of R-shaped ball groove in line with the diameter of the ball, the contact area is large, the load capacity is strong, and the service life is long..
Check Stock

Number Ones (Tgt)

  • Leather-wrapped wheel with 25 action buttons, 1 push-button and 4 rotary selectors natively recognized in GT Sport (differential braking, traction control, fuel mapping, torque management).
  • High-velocity, next-generation 40-watt brushless motor for exceptionally responsive Force Feedback with high torque capacity.
  • Internal components from the European automotive industry (AEC-Q), for maximum quality and lifespan.
  • Proprietary magnetic technology (H.E.A.R.T) for an unlimited lifespan and optimal precision.
  • Quick and easy wheel changing system, allowing for different types of wheels (F1, Rally, etc.) to be used (sold separately).
Check Stock

Three Kings [Explicit]

  • Leather-wrapped wheel with 25 action buttons, 1 push-button and 4 rotary selectors natively recognized in GT Sport (differential braking, traction control, fuel mapping, torque management).
  • High-velocity, next-generation 40-watt brushless motor for exceptionally responsive Force Feedback with high torque capacity.
  • Internal components from the European automotive industry (AEC-Q), for maximum quality and lifespan.
  • Proprietary magnetic technology (H.E.A.R.T) for an unlimited lifespan and optimal precision.
  • Quick and easy wheel changing system, allowing for different types of wheels (F1, Rally, etc.) to be used (sold separately).
Check Stock