ReviewsEpoxy For Filling Wood Cracks

Loctite Epoxy Metal/Concrete, 0.85 fl oz, 1, Syringe

  • For Concrete and Metal Projects: Permanent, high-strength bond works great on railings, awnings, posts, brick, concrete and cinderblock without conducting electricity.
  • Fast and Professional: High-strength epoxy sets in just 5 to 12 minutes to a metallic grey finish to blend with metal and concrete.
  • Two-Part Adhesive: Convenient double syringe applicator dispenses equal parts epoxy resin and hardener for a tough, rigid, high-strength bond.
  • Resilient: Does not shrink and is resistant to humidity and water, most common solvents, and has high impact resistance and can be sanded, drilled, and painted.
  • Multi-Purpose: Versatile epoxy can be used as an adhesive for a wide range of materials like tile, wood, metal, ceramic, and glass or as a filler for gap filling, surface repairs and laminating.
Check Stock

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
  • Formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block and unreinforced masonry..
  • PC-Concrete is excellent for filling and repairing cracks in concrete, and out-performs all caulks and hydraulic cements..
  • PC-Concrete will not come loose from any cleaned concrete surface and will hold during expansion and contraction of concrete..
  • PC-Concrete is the best solution for permanent concrete repair..
Check Stock

J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - 2 oz, Pack of 2

  • No Drip Formula: Thicker no-drip gel formulation is idea for vertical surfaces and overhead repairs.
  • Fast & Easy: High-strength epoxy sets in just 6 minutes for quick repairs and fully cures in 24 hours.
  • Two-Part Adhesive: Convenient double syringe applicator dispenses equal parts epoxy resin and hardener for a tough, rigid, high-strength bond.
  • Resilient: Does not shrink and is resistant to humidity and water, most common solvents, and has high impact resistance and can be sanded, drilled, and painted.
  • Multi-Purpose: Versatile epoxy can be used as an adhesive for a wide range of materials like tile, wood, metal, ceramic, and glass or as a filler for gap filling, surface repairs and laminating.
Check Stock

Casting Resin 1.5 Gallon Epoxy Kit (Stone Coat Countertops) – DIY Epoxy Resin Kit for Woodworking, River Tables, and Filling Large Voids Up to 1 Inch Thick! Deep Pour Epoxy is Clear and Colorable!

  • EASILY FILL LARGE VOIDS – Deep Pour Casting Resin Epoxy from Stone Coat Countertops is made for filling large voids up to 1 inch thick (depending on the mass of your project)! Use on a variety of epoxy projects, including woodworking, river tables, table tops, bar tops, and so much more!.
  • CRYSTAL-CLEAR SHINE – Give the surface of your epoxy project a sleek, glossy shine! Mix your 1.5 Gallon epoxy kit at a 2:1 ratio! Easily torch out bubbles using a small blowtorch! Slowly cures so you have more time to focus on perfecting your epoxy art!.
  • FULLY COLORABLE – Leave a clear coat of Casting Resin Epoxy OR mix with a variety of color additives for beautiful results! Mixes fast and easy with Metallic Powder, Mica Powder, Glitter Powder, Alumilite Liquid Dye, and Base Color Tints!.
  • PERFECT EPOXY FOR RIVER TABLES – Use Casting Epoxy to create stunning river tables that will last the test of time! Also works great for sealing voids in raw wood slab tops!.
  • USE WITH STONE COAT EPOXY – For extra durability, be sure to apply an additional coat of Art Coat or Stone Coat Epoxy over the surface of your project. This way, you can better protect your surface from everyday wear and tear!.
Check Stock

Metal Glue, 1.76oz 2 Part Liquid Metal Welding Epoxy Glue, Marine Filler Repair Putty, High-Temperature Resistant Heavy Duty ab Glue(3 pcs)

  • ...ed strength up to 4680PSI, can be stable between -65 ℃ ~ 287 ℃, cured gray, can be drilled, sanded, spray paint coloring, so that your items repaired to the original appearance..
  • WHAT CAN BE USED FOR Excellent impact resistance and strength make if your car or boat has cracks or holes, then choose this epoxy resin welding adhesive is your best choice! It's also great for repairing/fastening radiators, water pipes, tanks, pools, oil drums, cracks in bumpers or motorcycle fairings, broken headlight brackets, torn RV paneling fences, vases, swings, and other everyday items..
  • WHY WE RECOMMEND IT With its wide range of applications, excellent properties and almost ultimate cost performance, this epoxy glue can meet your needs in most usage scenarios at a very low cost and with guaranteed good quality! It's your fixer-upper!.
  • ADDITIONAL SERVICES If you need to contact us to provide an SGS test report and SDS composition report for your better use, also, you can inform us of your We will recommend to you the most economical way to use our products, We will recommend you the most economical, the best use, and the most....
Check Stock

1.76 oz Metal Bonding Glue Plastic Adhesive Epoxy Glue for Metal to Metal, Metal to Plastic, Ceramics, Filler for Automotive Marine Repair (3)

  • ...stic, glass, cured strength up to 4680PSI, can be stable between -65 ℃ ~ 287 ℃, cured gray, can be drilled, sanded, spray paint coloring, so that your items repaired to the original appearance..
  • Ⅲ. Excellent impact resistance and strength make if your car or boat has cracks or holes, then choose this epoxy resin welding adhesive is your best choice! It's also great for repairing, fastening radiators, water pipes, tanks, pools, oil drums, cracks in bumpers or motorcycle fairings, broken headlight brackets, torn RV paneling fences, vases, swings, and other everyday items..
  • Ⅳ. With its wide range of applications, excellent properties and almost ultimate cost performance, this epoxy glue can meet your needs in most usage scenarios at a very low cost and with guaranteed good quality..
  • Ⅴ. Use the pusher to push out the appropriate amount of glue on a flat surface, use the stirrer to mix it evenly (usually 5 minutes, if not, it will affect the bonding effect), then apply the mixture to the clean surface of the material to be bonded, place the parts to be welded in the appropriate position as needed, and leave it hor....
Check Stock

Super Cast 1.5 Gallon Epoxy Kit (Stone Coat Countertops) – DIY Epoxy Resin Kit for Woodworking, River Tables, and Filling Large Voids Up to 2 Inches Thick! Deep Pour Epoxy is Clear and Colorable!

  • EASILY FILL LARGE VOIDS – Thick Pour Super Cast Epoxy from Stone Coat Countertops is made for filling large voids up to 2 inches thick (depending on the mass of your project)! Use on a variety of epoxy projects, including woodworking, river tables, table tops, bar tops, and so much more!.
  • CRYSTAL-CLEAR SHINE – Give the surface of your epoxy project a sleek, glossy shine! Mix your 1.5 Gallon epoxy kit at a 2:1 ratio! Easily torch out bubbles using a small blowtorch! Slowly cures so you have more time to focus on perfecting your epoxy art!.
  • FULLY COLORABLE – Leave a clear coat of Super Cast Epoxy OR mix with a variety of color additives for beautiful results! Mixes fast and easy with Metallic Powder, Mica Powder, Glitter Powder, Alumilite Liquid Dye, and Base Color Tints!.
  • PERFECT EPOXY FOR RIVER TABLES – Use Super Cast to create stunning river tables that will last the test of time! Also works great for sealing voids in raw wood slab tops!.
  • USE WITH STONE COAT EPOXY – For extra durability, be sure to apply an additional coat of Art Coat or Stone Coat Epoxy over the surface of your project. This way, you can better protect your surface from everyday wear and tear!.
Check Stock

J-B Weld 40007 Wood Restore Premium Epoxy Putty Kit - 64 oz.

  • WOODRESTORE: Is a hand mixable epoxy putty specially formulated to repair and rebuild wood quickly and easily. When applied it adds structural strength to areas of damaged or rotted wood..
  • WHAT THE PROFESSIONALS USE: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments. Choose the product pros trust for your project..
  • EASY TO USE: It can be used to fill, build, reinforce or bond wood surfaces. It contains no solvents, will not rot, shrink, crack or pull away. It can be sanded, machined, filed and painted..
  • VERSATILE & DEPENDABLE: Great for rotted or damaged wood, repairs to doors, windows and furniture, exterior posts, window frames and sills, large cracks and major repairs..
  • NO PROJECT TOO BIG OR TOO SMALL: We have all the products you need to get the job done right. JB Weld always delivers the legendary performance of the World's Strongest Bond..
Check Stock

Premium Grade Cyanoacrylate (CA) Super Glue by STARBOND - 2 OZ PRO Pack (56-Gram) - Black Medium Crack Filler 150 CPS Viscosity Adhesive for Woodworking, Woodturning, Carpentry

  • J-B WELD KWIKWOOD: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild wood. J-B Weld KwikWood is designed for all wood household DIY repairs!.
  • CURE AND SET TIME: After kneading the two part formula together by hand, KwikWood takes 15-25 minutes to set and cures in 1 hour. J-B Weld KwikWood set and cure color is a light tan..
  • PRODUCT FEATURES AND STRENGTH: J-B Weld KwikWood has lap shear strength of 900 PSI. KwikWood will not shrink or rot and can be stained, molded, tapped, drilled, sanded and shaped..
  • APPLICATIONS: Window/Door Hinge Repairs, Dry Rot Repairs, Gouges and cracks in furniture, knot hole repairs, gap fillers and more!.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Casting Repair Glue, Welding Glue, Plastic to Metal Epoxy Glue for Metal to Metal, Metal to Plastic, Ceramics, Filler for Automotive Marine Repair 1.76 oz(1PCS)

  • ...stic, glass, cured strength up to 4680PSI, can be stable between -65 ℃ ~ 287 ℃, cured gray, can be drilled, sanded, spray paint coloring, so that your items repaired to the original appearance..
  • Ⅲ. Excellent impact resistance and strength make if your car or boat has cracks or holes, then choose this epoxy resin welding adhesive is your best choice! It's also great for repairing, fastening radiators, water pipes, tanks, pools, oil drums, cracks in bumpers or motorcycle fairings, broken headlight brackets, torn RV paneling fences, vases, swings, and other everyday items..
  • Ⅳ. With its wide range of applications, excellent properties and almost ultimate cost performance, this epoxy glue can meet your needs in most usage scenarios at a very low cost and with guaranteed good quality..
  • Ⅴ. Use the pusher to push out the appropriate amount of glue on a flat surface, use the stirrer to mix it evenly (usually 5 minutes, if not, it will affect the bonding effect), then apply the mixture to the clean surface of the material to be bonded, place the parts to be welded in the appropriate position as needed, and leave it hor....
Check Stock

J-B Weld 40006 Wood Restore Premium Epoxy Putty Kit - 32 oz.

  • Woodrestore Premium: Is a hand mixable epoxy putty made to repair & rebuild wood quickly & easily adding structural strength to areas of damaged or rotted wood. Use to fill, build, reinforce, or bond..
  • What The Professionals Use: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments. Choose the product pros trust for your project..
  • Superior Performance: Curing to the same density as wood, it contains no solvents.
  • will not rot, shrink, crack or pull away. After 60 minutes, it can be sanded, tapped, machined, filed and painted..
  • Versatile and Dependable: Use this formula for rotted or damaged wood, doors, windows, furniture, exterior columns, posts, window frames and sills.
  • or repair large cracks and make major repairs..
  • Do It YourselfF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World's Strongest Bond..
Check Stock